Your cart is empty.
Your cart is empty.Product Description
Information
Taps can be divided into straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also divided into hand taps and machine taps according to the usage. Hand taps are operated by tap wrenches. Machine taps are suggested to be used with tap collets with overload protection, and hand use or electric drills use is easy to cause breakage to the tap.
High Speed Steel Hand Taps
Straight flute design. Provide downward chip removal, and fast tapping with accuracy. It has high hardness, high strength, good toughness, and wear resistance.
No Coatings
Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
Taps Styles
Taper Style Taps: Starts tapping threads square with the work pieces. Plug Style Taps: Generally used for drilling through holes. Bottom Style Taps: Generate threads on the bottom of the holes.
Wide Applications
Suitable for processing through holes or shallow blind holes. Can make new threads or rethread damaged or jammed threads in aluminum, mild steels, plastic, soft metal.
Hand taps are operated by tap wrenches. Use with tapping oil to get higher quality threads and more durable taps. Tapping oil is lubrication, cooling and anti-sticking. Please apply anti-rust oil for maintenance after use to prolong the service life.
Sean Zanella
2025-08-31 17:52:52
idk if they are the best quality taps, but they look well finished, and i was using them to chase threads in hdpe/derlin type material, and they worked well in that application.
RJ Miz
2025-07-05 18:06:04
Tried to save a small part when a screw broke off. The taps performed well considering they had everything going against them. I am not disappointed; they stayed sharp and did not break.
L. Smith
2025-06-23 12:45:21
Had a couple holes needing tapped in a project I was working in. Initially tried to form threads using the screws, but had one break upon removal, used these to thread the rest of the holes and rethread the hole after drilling out the piece of screw that had broken.
Tristan Gaskins
2025-06-20 17:05:01
I managed to break two over the course of ~50 holes in aluminum plate. Even using a hand tap and tapping paste, they broke due to being pretty brittle. Tolerances were great though.
Customer
2025-05-11 14:50:25
Used the taps on aluminum for the first time using a drill press, hand turned and wd40. I busted two of them before I quit. Trying to pick out the bit and turn it out resulted in the top of the bit shattering. Won't buy these again
A guy
2025-05-10 12:26:31
Got some cheap taps before and would baby them through a couple holes before they snapped because they were so dull. These are great, haven't broken one yet and it's been through about a fifty holes, just starting to dull a little now.
/Dev/Null
2025-03-30 14:42:10
Had 12 holes to tap in cast iron. Figured I'd snap a few of them (they are quite small, and I have horrible luck with taps and easy-outs snapping on me)But I got it all done with a single tap. OK, it snapped on the very last, but didn't kill the project (no need to a tap extractor or a EDM sinker. Will work just peachy with one less bolt)I did lube well, often, and cleaned 1/2 way through and at the end.Take your time, listen to the feedback of the tap wrench, and error on the safe.(Do stay away from carbon taps, dies, and drill bits. HSS, cobalt are the ones you want)
Customer
2025-03-21 10:40:58
Needed these to tap threads for custom insert tooling and they worked perfectly in 6 different tools made from 4140 without breaking or dulling.
james forbes
2024-12-29 15:46:51
Best deal
Recommended Products