Your cart is empty.
Your cart is empty. Description:
1.Non-directional,turning on by any touching off angle.
2.Applied to the eletronic , small household appliance, sports equipmens and anti-theft devices.
3.Features high sensitivity, sealed package, good performance and reliable.
4.In silent surroundings it keeps on turning off state with any angle, When it is hit by outside force and comes to the proper shaking state or the moving speed comes to the proper centric force, then the current leader point will display turning on state for a short time the electric character will be changerd, as the outside force disappears, it restores the turning off state.
Specification:
Product Name: Vibration Switch
Model Number: SW-18010P
Sensitivity: High Sensitivity
Max.Voltage: 12V
Rated Thermal Current: 5mA
Insulation Resistance: 10M ohm
Max.Temperature Resisting: 100℃
Pin Size: 9mm x 0.6mm(L*D)
Body Dimension: 15mm x 4.8mm(L*D)
Package Content:
10 x Vibration Switch
Yet Another Voice
2025-09-03 13:40:16
My goal was to turn on an LED for a half-second or so when vibration is sensed. Using one of these to trigger a 555 works great. The 555 input is definitely fast enough to trigger on the ~2 ms contact of the 18010 and it makes an accurate, sensitive vibration detector. You do want to use some kind of comparator (in my case, the 555 input) to clean up the signal.
John Weaver III
2025-08-23 13:53:36
Works as expected
Paulo C.
2025-08-10 18:06:28
I bought them, to do an experiment with some Sonoff zigbee contact sensors, to detect blows on the vnetana. The truth is that they are very unreliable when making contact and they do not always work. I will look for something better.
TLC
2025-08-01 18:19:23
One electrode on each switch melts too easily and makes soldering inconvenient. Otherwise, these switches work very well.
Beantown
2025-04-11 15:12:29
These are FAR from "high sensitivity." They are total crap. One of the leads is like a hair. It broken off the first one I tested.
Don McArthur
2025-02-11 18:37:56
I went through 3 of these before I figured out that it was arcing and welding itself shut. Seems like 5 volts and a few milli amps is too much, a small resistor solved the problem
Luhan
2024-12-01 14:47:29
I used these to automatically turn off devices I designed just by setting them down. Picking them up activates a contact which I use to power up my device.
Danno
2024-11-25 15:05:24
These work as they're supposed to, but I didn't find them useful for my purposes.
Recommended Products
$154.38
$ 63 .99 $63.99