Your cart is empty.
Your cart is empty.Product Description
Information
Taps can be divided into straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also divided into hand taps and machine taps according to the usage.
Hand taps are operated by tap wrenches. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
Extra Long Thread Taps
Straight Flute Tap
Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
6542 (M2) High Speed Steel
6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance.
Uncoated Taps
Feature just the base substrate without any additional coatings, great for a wide range of applications.
Machine Taps
- Clear threads without burrs
- Used with tapping machines, drilling machines, milling machines, CNC.
- Drill the holes with a twist drill bit first, then tap with a thread tap.
- The tapping angle should be 90 degrees vertical and stable.
Wide Applications
Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc..
Add proper tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter of the tap (for example, the diameter M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.)
Tips
Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Cutting oil is lubrication, cooling and anti-sticking. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.
Control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. The force must be uniform in tapping operations.
David Wright
2025-09-02 17:24:36
Form, fit, and function as advertised.
Steve
2025-07-18 11:14:58
Needed at tap with a shaft thin enough to allow tapping 1" thick stock - this tap fit the bill perfectly. Did 10 holes through 1" mild steel, no problems whatsoever.
Amakertech
2025-06-30 20:34:52
Extra reach helped to tap head thru intake manifold boss.Tap cut well in cast iron & mild steel, good quality tap.
Kenneth
2025-06-14 11:18:48
Hard steel! Fast shipping! Had to grind it down but it did the trick.
Stephanie L.
2025-06-05 18:10:29
Looked for this at local stores and no one had it. Found it here and it got the job done.
van
2025-05-14 18:25:18
Worked great to clean water pump holes for 91 Ford.
Arthur Bennett
2025-03-14 19:10:16
The media could not be loaded.
Bill
2025-02-18 16:06:03
It’s a long tap and works fine
Todd
2025-02-16 11:40:32
Extra length worked well.
gerald fenwick
2025-01-28 18:32:07
Used ro repair the thread on a shifting spanner, enabled the existing dowel to be replaced with an oversized threaded dowel
Recommended Products
$24.99
$ 12 .99 $12.99
$52.99
$ 28 .99 $28.99