Your cart is empty.
Your cart is empty.Product Description
VCE Keystone Punch Down Stand & Mini Wire Stripper Cutter
- VCE punch down tool stand provides a solid base for terminating RJ45 90/180 degree keystone jacks and RJ11/12 telephone modular keystone.
- Prevents the stand from chipping or cracking when dropped on the floor.
- Engineering plastic housing makes it a hard surface and not easy to be scraped or cracked
- With wire stripper cutter used to punch down wires into blocks. Easy and safe to strip cables, and punch down wires on modular connectors
Package Content
- 1 x Keystone punch down stand
- 1 x Mini wire stripper cutter
Wild Compatibility
- Location A for RJ45 90 degree keystone jacks
- Location B for RJ45 180 degree keystone jacks
- Location C for RJ11/RJ12 telephone jacks
NOTE:
location A and B ONLY compatible with VCE keystone jack
Practical Design
- Rotating hole
- Stripping groove
- Pressure line mouth
How to use the Mini Wire Stripper Punch Down Cutter ?
Removing & Inserting the Blade
- 1) Put the cable in to the notch and adjust it to the suitable size that you want.
- 2) Start to rotate the mini wire stripper with a circle around the cable.
- 3) Loosen the stripping knife and pull out the cable sheath, cable is well stripped simply and perfectly.
- 4) Punch down wires on punch down stand.
Ed
2025-08-23 15:23:13
I like this product & would definitely buy again
Louie Vega
2025-08-15 18:47:18
No problems to report with this product or the vendor. Will buy again if necessary.
Richard
2025-08-10 20:22:46
I already have a professional punch down tool, so I didn't need the punch down tool. However, the wire stripper works really well and I like it. The punch down stand is the really valuable item. It holds the jack steady during punchdown and reduces chance of injury or breaking the tabs off the jack.
Just reading
2025-08-09 13:48:03
Makes the completion of punch down simple an quick great third hand
Diana M Monteiro
2025-07-23 10:50:56
No more punching my hand 😂!!! Great for tight spaces and cable strippers are awesome ðŸ‘
Shawn Alverson
2025-07-09 10:54:44
Using this with rear entry cat6 ( Position B ), this position does not lock, so it it completely useless to me. The jack just pops out when punching down. The yellow tool works, but the blade falls out, and the stripper cuts too deep.
The Burninator
2025-07-07 15:51:30
Just find the right slot for the connection you are making and place the jack there. This allow for much greater stability when you make the punchdown connections. I used this for several runs of cable and it make the connections quicker and I did not have any signal loss.
Frederick Daye
2025-04-19 20:23:33
Great crimping tool. The yellow wire stripping tool is the reason I gave a four star rating. The blade came off of the tool it is a low cost tool but the blade should be fused in place otherwise I recommend this tool set.
Kindle Customer
2025-03-27 17:14:06
Worked for me.I didn't want to spend a lot for a quality tool that I'll only use a couple times.This worked well.
Anon-anon
2025-03-21 12:50:21
Provided a good stable way to install wires into RJ45-keystone jacks on bumpy stucco-like drywall surface.The wire stripper was far superior to the similar-looking one that I got with the super cheap Westonetek-branded punchdown impact tool, but with this stand I could use that punchdown to push hard and move handle 360º degrees to get wires seated correctly and stand let me avoid damaging wall.So I'd recommend getting this stand.
Chris Palmer
2025-02-26 15:01:22
A pretty mundane product at an excellent price, the VCE keystone punch down is excellent value for money.The Good:- Excellent price point and warehoused locally for quick shipping- The punch down stand has both A and B orientations- The punch down stand is sturdyThe Bad:- The punch down stand is hollow on the base, meaning you'll be grinding up your hands if holding it to punch- The wire stripper is ABSOLUTELY useless. As a stripper, it often cut too deep, scoring the twisted pairs. As a punch down tool, it was next to useless as it can't deliver enough force to properly seat a wireOverall, this is great value for the punch down stand, but prepare to throw the stripper/punch down tool in the trash and buy proper tools for those jobs instead.
Hassan
2025-02-22 19:55:16
The stand is perfect with using punch down tool, makes it much easier.
Nelson
2025-02-20 14:42:46
works as intended.
Recommended Products
$16.99
$ 8 .99 $8.99
$106.24
$ 52 .99 $52.99