Your cart is empty.
Your cart is empty.Product Description
Description
Specification
- Lead Cutting Angle: 95 Degree
- Direction: Right Hand
- Carbide Inserts: CCMT0602
- Clear mark on the wrench, easy to identify bar holder
VerRich 3pcs Boring Bars Turning Tools Holder Set
Lathe Turning Tools with 10pcs CCMT0602 Carbide Inserts + 3 Pcs Wrench
Material :High quality Steel Durable for Long Time Use: Imported main part, the bar holder adopts imported 40Cr material.
Widely Use: Tightly impacted bolt, simple structure, often used for small hole machining.
Details
3pcs Boring Bars Size
Shank D:
S07K-SCLCR06: 8mm/0.32"
S10K-SCLCR06: 11mm/0.43"
S12M-SCLCR06: 12mm/0.47"
Overall L:
S07K-SCLCR06: 122mm/4.8"
S10K-SCLCR06: 122mm/4.8"
S12M-SCLCR06: 150mm/5.91"
CCMT0602 Carbide Inserts
10pcs CCMT0602 Carbide Inserts
Instructions
1. take out the screw
2. Insert the blade
3. Tighten the screws
Package included
1 x S07K-SCLCR06 Boring Bar
1 x S10K-SCLCR06 Boring Bar
1 x S12M-SCLCR06 Boring Bar
10 x CCMT0602 Insert
3 x Wrenches
1 x package box
Widely Use
Tightly impacted bolt, simple structure, often used for small hole machining.
Tim H.
2025-08-11 11:01:57
Amazing deal. The quality is great, never had any issue with any of these tools. Geometry is good, the heat treats good, the carbide cuts everything you can throw at it. Anybody that has any type of issues after buying this tool, before you go riding and ignorant review, just remember, are you smarter than a tool? You're probably doing something wrong if you're having issues or you have a junk machine
PS
2025-07-26 14:25:58
Works good, made of quality materials
Brian C
2025-07-22 12:26:23
I would have given this a 5 start but the packaging was confusing. The boring bars are packaged in a box that is for lathe tools. I contacted the seller and we were able to easily sort this out. The seller was extremely responsive and I will deal with him in the future.There are three boring bars. I have used the small one on five projects so far. It is strong and works well. Installing the carbide insert is easy but I would recommend strongly that you keep the grub screw on the driver as it is small and easily dropped. The inserts seem to be well made and cut easily.
Annie
2025-07-17 11:11:34
For many years I've used 1/2" TCMT insert tools on smaller lathes from 10" to 13" and workpieces that were smaller than 2" OD. They were just OK but I needed something that had a smaller nose radius to make tight inside corners and was hoping for a better finish on whatever type of steel I had available at the time. Someone had recommend that I use a smaller nose radius tool to achieve my goals. The first thing I did with these tools was to make an adapter to put the boring bar in a QCTP holder that had a 3/4" bore. I used a scrap 4041 steel rifle barrel blank. At a speed much slower than expected I got a beautiful finish. At 720 rpm, a feed rate of .003" and a DOC of .010 I got a beautiful finish. That's a much lower feed and speed than the calculators recommend so even older lathes like the ubiquitous South Bend and Craftsman lathes can get a great finish without needing speeds beyond their capabilities.
Mike S.
2025-07-14 16:26:03
Well made, inserts are better than I expected, work well in mild steel, and stainless at low speed with coolant.wish shanks were 1/2" but new what I was getting
Thomas Dahlen
2025-06-29 18:28:25
Price
Michele067
2025-06-16 21:17:01
I really like indexable tooling because I get nice sharp tool edges with a quick tool but change. These guys are just the ticket but if you are boring a lot of material I would suggest a beefier tool, or finish using light cuts with this set. Chatter and deflection were present when I pushed some deeper cuts.
james w gaines jr
2025-06-15 14:08:23
Lathe bits work well in my 9" Montgomery Ward Lathe. I have machined mild steel and some harder alloys. Bits are easily changed. Bits also work well and last a long time.
Steve chasse
2025-06-09 17:23:33
Working good
MIGUEL VELAZQUEZ C
2025-05-08 13:53:15
BUENA HERRAMIENTA, TRABAJA BIEN
Jason Stevenson
2025-04-14 18:16:08
needed a small set of boring bars for work I do. this set works great. the carbides that came with it work well on iron, steel and Stainless. good deal for someone on a budget. no complaints so far.
Chris
2025-02-24 15:50:52
After using the tools on a job the other day they certainly don’t seem bad for the money.
Mr.Unzufrieden
2025-02-20 12:32:31
Gerne wieder 😃ðŸ‘
Recommended Products