Your cart is empty.
Your cart is empty. [Use]
For assembly and maintenance of electric tools, furniture, in cars, etc.
Features:
Ball grip screwdriver bit replacement type.
Can be used with electric screwdriver bits (0.25 inches (6.35 mm) on each side.
The replacement bit size is +1 and +3 and +2 common use with the slotted blade tip -6. The 6 sizes of the Posi-Drive PZ2 and PZ3 are used for assembling import furniture and snowboard binding.
jbrew2001
2025-08-25 10:57:53
Ever since i bought this screwdriver set i have been trying t figure out why its the best screwdriver I’ve ever used.It’s a bit of a mystery. It comes with three double ended bits and no roll up to hold them (will they get lost?). The two most useful bits have a #6 straight and #1,2,and 3 ends and the third has #2 and 3 PZ (some day I’ll run across some of those). The bits have size markings painted on that start wearing off the first day.So why has this become my favorite go-to?1. The bits. The steel is very very good, and the fit (particularly in the Philips-head sizes) is exceptional. No stripping out. The straight bit tapers in such a way that the sides are almost parallel. It looks like it would be weak, but it isn’t. Good steel!2. The handle. The bits fit in beautifully and are held with just the right tension.3. Ergonomics. The handle is extremely satisfying. You can apply more torque than you ever imagined for a hand screwdriver, and using it all day would be a pleasure.So I guess the solution to the mystery is - quality is what it’s all about. Bits #1 and 2 fit 90% of my daily needs. If I need another size I can pop in some other 1/4†hex shank bit (the handle fits these). I suppose a roll-up is unnecessary. The bit that I’m not using is handy in my pocket.
Mike
2025-07-31 13:10:06
Saddened by the exodus of American made tools to the likes of China? Would you like to experience, again, the same high quality of hand tools that used to be made here? Then think "Japan". Vessel is a well-established Japanese tool maker and they make their tools in, surprise, Japan.This screw driver set is excellent in every respect. The ergonomics are great; the ball handle fits the palm comfortably and effectively. The fit and finish are first class. The bits are all strongly magnetized and will cling to one another when put away in your toolbox. The bits fit securely into the handle; there is no wobble or play. The bit selection consists of a variety of common JIS (Japanese Industrial Standard) and Phillips plus a single straight bit. What's even more amazing is the reasonable price point on these tools. I have two other Vessel JIS drivers that have a built-in impact capability for loosening screws. Vessel makes good stuff for a fair price.I bought this kit to use when working on my DR560 Dual Sport motorcycle. Because of its compactness, It's included in my pack along tool kit. JIS screws work best with JIS drivers. I learned the hard way using Phillips drivers; it doesn't work well. Most all Asian-made vehicles use JIS screws in lieu of Phillips. A JIS screw will have a small dimple stamped on the head of the screw ...even the smallest ones.Vessel tools. On my list. Quality stuff, reasonably priced. If you appreciate quality tools, check out Vessel; they're *not* made in China.
Felix B
2025-06-24 12:38:50
Where to start? You can just tell this is a very well designed kit by holding it. The handle is incredibly comfortable and the shafts themselves have good weight to them, indicating high quality. The fit is very nice and snug and the base handle looks to also accommodate other hex bits at least 1.5" long. The only con I have for this set is that you'll have to store the bits not in use as there's no compartment built into the handle. But something I didn't expect is that the bits are magnetized in certain spots and stick to each other very well, making storage even cleaner for them. I assume other bits made by this company will cling to each other just the same.As for the important parts, these drivers seem to grab screws just about better than any other screwdriver I've ever owned. I was super impressed with how well they grab. And turning is a breeze with the comfortable ball handle. Definitely going to expand on the kit by purchasing more bits from these guys. For the price, I can't imagine a better buy. These seem like they should be worth double than what I paid.
Kevin Crowe
2025-06-08 13:40:41
Originally I was not a fan of the ball grip screwdrivers and this is my first one, but the more I use this the more I like them. This is pretty small for a multi-bit screwdriver but feels very sturdy. The extra bits are magnetized and they stay stuck on the side of my toolbox. Got this for under $10 and have no complaints. I have a range of milwaukee, wiha and husky screwdrivers I rate this above and on par with a wera set I have. Will probably be investing in some more vessel ball grips in the future.
Rafael T.
2025-05-01 18:00:49
I spent quite a bit of time trying to find the best screw driver for my needs and this one fit the bill. It has a great ergonomic feel to it and has a great quality feeling to it. The only negative is that you need to use an adapter if you have smaller bits or it won't fit and just fall in but that was a very minor issue.
Daniel d.
2025-04-06 12:04:54
Excelente desarmador al mejor precio buen agarre y puntas intercambiables solo estarÃa bien que Viena en estuche de plástico o lona lo demás excelente 😎
Cliente
2025-02-25 14:37:30
Muy bien
Skurken
2025-02-07 17:23:43
👌ðŸ½
J A Phillips
2024-12-28 16:45:07
Bought this mostly because the heads were JIS, and that's hard to find. It seems like a nice screwdriver. Good quality and shape fits your hand well. I'm pleased with it.
Recommended Products
