Your cart is empty.
Your cart is empty.Product Description
It is made of high quality galvanised welded steel structure with thick welding joints, stable overall structure and good load bearing performance. Its load capacity can be up to 1000 lbs, helping you to load and unload goods easily, saving energy and worry.
The boom of the truck crane can be adjusted to three length classes, 20.6"-26.5"-32.4", and the three lengths correspond to the load of 1000lbs-750lbs-500lbs. Crane dimensions are: 44.88 x 45.67 x 67.72 inches.
The support bar can be rotated 360 degrees, you can adjust the direction flexibly according to according to your needs, and carry the goods easily. The base of the davit crane is removable and effortlessly installed.
This truck mounted crane has a swivel bar with fixed pins to secure the orientation for easy cargo handling. Meanwhile, it has industrial-grade hydraulic cylinders to keep you safe and secure when loading and unloading cargo. In addition, the boom is adjustable and foldable for easy use and storage.
Customer
2025-08-25 11:39:47
Box was busted open!! Parts missing!!! Pin won’t fit the chain. Bolt to tighten swivel is too large or wrong nut was welded on. I would NEVER BUY THIS PRODUCT!!
Jim
2025-06-15 13:24:15
I ordered this back on December 7 2024, it arrived in about three weeks with a gaping hole in the package, hemorrhaging nuts, bolts washers and lock washers as it was moved from the UPS truck with the driver suggesting I might want to refuse the delivery, and maybe I should have but I knew with Amazon I could order a replacement and I felt keeping what arrived until the replacement showed up might be my best bet at being able to build one complete unit if the second order arrived in similar bad package shape. Aside from pretty much all the nuts, bolts, washers, lock washers and small assembly hardware missing, it was also missing both of the legs as well. A month after placing a second order and asking Amazon to please extend my return time, the seller canceled that order! I had Amazon place a third order and extend my return again to be sure they overlapped at least two days so I would have time to see if I could make one complete unit. The third unit was the fastest, arriving in about a week and initially as it came off the UPS truck it looked really good but it too had a split seam on one end and had lost some of the loose hardware! As luck would have it, I was able to assemble one complete unit with just enough hardware. Now to why you need to purchase a 14 X 2.0 metric tap: It comes with a metal 1/2" diameter threaded rod that is bent to form a handle with a plastic ball on the end. This is used to tighten into the base and stop the rotation of the crane so it won't swivel on the 360 degree rotational bearing. It is metric male threaded (14 X 2.0) on the end that threads into a welded nut on the base. The problem WITH BOTH of the units I received is they welded a metric 12 X 2.0 nut to the base so the handle is larger that the nut and won't thread in! I ordered a 14 X 2.0 tap after first heading to the hardware store to find a metric nut that would thread on the handle so I could figure out what size and thread pitch tap to order, lol. The tap arrived today, I drilled and tapped the12 mm dia nut and was able to "fix" that issue. The handle threads in and does the job of locking the rotational movement. Mission accomplished and total time from 1st order to having a complete crane was 60 days. I mounted it on my full size 1 ton truck and discovered opening the tail gate won't clear the crane unless I remove 1 bolt on the 90 degree hitch adapter and slide it over so only one hole lines up and bolt it in that position. That will work fine for what I need to do with the crane but others might need to have the two bolts holding the hitch 90 degree adapter. I hope this helps someone considering this purchase, I'm happy with the end result, wasn't in a hurry and had the basic skill set to deal with the wrong size welded nut. Returning what's left over to UPS tomorrow.
Grandpa Bill
2025-06-13 18:15:57
Wrong size nut welded to frame to secure pivot point. Locking handle will not screw into it!
Mardy Jensen
2025-05-24 13:59:09
First try the Velor truck crane easily lifted a rock of about 500 to 600 pounds and loaded it and one other of equal size in the bed of a shell covered pickup truck!
Customer
2025-04-08 13:43:40
Does not lift DR field mower high enough to load on to my truck bed.
Me
2025-04-07 11:15:22
Pretty well made but I did not get all of the parts originally to put it together but the company sent me a a box of parts
Scott Floyd
2024-12-01 18:48:56
The product came on time and for the most part is functional, but an important safety feature does not work. The screw intended to keep the lift from swiveling did not fit the threaded hole. It was several sizes too large. As of yet customer service has not been effective in handling the issue.Update - after calling and emailing customer service several times I cannot recommend them. Very disappointed. I will fix the problem myself with the correct part. I've given up trying to work with them.
Recommended Products
$453.47
$ 99 .00 $99.00