Your cart is empty.
Your cart is empty.Product Description
NEW Small Size Vgate 8-Way Lead Acid Battery Multi-Size Hole Holder
A-8 Product Details
4 x Hole Holders
- 4 x hole-holders contain two 2/0 AWG hole holders, and two 1/0 AWG, but the size of hole holders are slightly larger than the above-mentioned gauges.
- Vgate battery terminal 4-Hole Holders exactly to hold 2 AWG to 1/0 AWG (2 Holes) & 1/0 AWG to 2/0 AWG (2 Holes) welding cable.
4 x Threaded Studs
- 4 x threaded studs to connect ring terminals (cable lugs).
- The size of studs are 8 mm to be suitable for the following eyelet of ring terminals:
1/2”, 3/8” and 5/16”；or 12 mm, 10 mm, 8 mm.
For Multiple Size
- The above-mentioned ring terminals (cable lugs) to crimp large-scale gauge cables as following:
4/0(XL) AWG, 2/0 AWG, 1/0 AWG, 2 AWG, 8 AWG and so on.
Application
- NOTE: This product does not contain the cable lugs shown in the picture.
Vgate 8-Way Multi-Size Connectors: 4 Input Hole Holders & 4 Threaded Studs
MODEL: A-8
Battery Terminal Contrast
A-8 | Product Model | AM-12 |
8 up to 4/0AWG Gauge | For Wire Gauge | 8 up to 4/0AWG Gauge |
4 Holders 2/0, 1/0 | Hole Holders (AWG) | 4 Holders 2/0, 2 |
4 Studs (8mm) | Threaded Studs (mm) | 8 Studs (4, 6, 8mm) |
| | For LeadAcid Battery | |
Stud Adapter Needed | For Lithium Battery | Stud Adapter Needed |
A-8 | Product Model | A-12 |
8 up to 4/0AWG Gauge | For Wire Gauge | 8 up to 4/0AWG Gauge |
4 Holders 2/0, 1/0 | Hole Holders (AWG) | 6 Holders 2/0 |
4 Studs (8mm) | Threaded Studs (mm) | 6 Studs (8mm) |
| | For LeadAcid Battery | |
Stud Adapter Needed | For Lithium Battery | Stud Adapter Needed |
A-8 | Product Model | AM-20 |
8 up to 4/0AWG Gauge | For Wire Gauge | 8 up to 4/0AWG Gauge |
4 Holders 2/0, 1/0 | Hole Holders (AWG) | 8 Holder 2/0, 1/0, 2 |
4 Studs (8mm) | Threaded Studs (mm) | 12 Studs (4, 6, 8mm) |
| | For LeadAcid Battery | |
Stud Adapter Needed | For Lithium Battery | Stud Adapter Needed |
A-8 | Product Model | AF-12 |
8 up to 4/0AWG Gauge | For Wire Gauge | 8 up to 4/0AWG Gauge |
4 Holders 2/0, 1/0 | Hole Holders (AWG) | None |
4 Studs (8mm) | Threaded Studs (mm) | 12 Studs (5, 8mm) |
| | For LeadAcid Battery | |
Stud Adapter Needed | For Lithium Battery | Stud Adapter Needed |
- MODEL: AM-12
- MODEL: A-12
- MODEL: AM-20
- MODEL: AF-12
Vgate Battery Terminals Family
- To ensure a stable installation, DO NOT use the anti-corrosion washers.
- Please make sure to place the product at the bottom of the positive, negative poles of the battery. Firstly unscrew the hexagon socket screw, put the product to the bottom and tighten it again, so that it will not loosen.
1
2
3
4
5
Kevin C.
2025-08-19 13:21:18
I replaced both of my Optima YELLOWTOP batteries in my Chevy/Duramax 3500 Crew Cab the other day (diesel engines require dual starting batteries) and realized that I was badly needing a clean up of my 12v wiring under the hood.I have added many accessories over the years, including an onboard air compressor for my Grover air horn, a new stereo system with a high output amplifier, front and rear cameras, HID headlights, a 1200 piece starlight headliner, etc., etc., etc. You get the idea. 🤣I found these battery terminals while searching for a solution to the obscene cluster of wiring that was attached to my old battery terminals, as well as to multiple grounding points throughout the engine bay.I compared the design, build quality and customer reviews of many different types of terminals before deciding upon these.These puppies are very well made! Solid aluminum blocks with multiple attachment points for a variety of wire gauges. And, they have well designed terminal clamps that you can actually securely tighten without fear of them snapping in two when applying enough torque to make a tight, complete contact connection with the battery posts.About an hour’s worth of work, some heat-shrink tubing and some quality ring connectors, a few (actually, quite a few) nylon tie-wraps and a roll of wire looming tape and my engine bay is looking (and actually working) MUCH, MUCH better!!! 😄I’ve noticed that my stereo system is actually sounding considerably better than when I was using a chassis ground connection instead of a terminal ground connection.Furthermore, I’m no longer ashamed to open my truck’s hood! 😂Although these are slightly more expensive than some of the other brands out there that offer similarly designed products, I honestly believe these are far and away superior. They’re honestly worth every single penny, and then some!!! 😉I highly, highly recommend these battery terminals!Your engine bay, your battery and even your electronic accessories will ALL thank you!!! 😀
Robert
2025-07-27 16:55:51
Picked these you to replace my worn out KnuConcepts terminals. 2015 Tacoma w/ 27F battery. Plenty of room in all directions for mounting orientation. Very functional and easy to use in comparison to my old terminals.The listing pictures don't quite do these justice. There is a nice pocket machined on the back around the clamp to accommodate battery posts that may have a lip or shoulder. As well on the back side of the screw block there is a piece of thick plastic attached to mitigate the blocks from shorting out on any metal that may be below them. Lastly there is a bag of star type locking washers for the side screws.The hardware is metric, nuts were 13mm and the hex cap screws are a 5mm Allen. The terminal clamps fit perfectly and are extremely easy to remove and reposition if needed.All in all these are a great value for the money, even compared to the slightly cheaper SHCA blocks.
Meeikal
2025-06-07 15:31:22
Fit nice on my 51R battery terminals. Very useful after a big 3 upgrade. Shiny, good conductivities, seems well made. I like the top and side connectors. Depending on what kinda of terminals and how they are oriented this device makes for a versatile connection.
Customer
2025-06-06 21:14:43
The first thing to say is that these are large. They work fine, but when you move from the standard single connector to these, they seem massive. It has been noted that the tightening screw on one side will be difficult to tighten if you have a battery that the terminal is recessed. I have recessed terminals and in my case, the negative was inaccessible by the allen wrench. I ended up grinding off part of the short side of the correct allen wrench to tighten the connector onto the terminal. There are plenty of connection points on these to meet almost all your needs. I did pick up some copper washers to put on the post that the "positive fused" cable hooked up because of the way it is designed. That's no fault of these but how the truck manufacturer decided to make the main fused positive connection. For reference, the larger cables are 1/0 AWG and the copper lugs fit without any modification.
Ronny Pitman
2025-06-04 18:45:57
Product works perfect. Arrived in 2 days. I would recommend this product
Joe
2025-05-26 11:48:00
The detail and shine, enhances your engine bay. A very nice upgrade, and They are also very beefy terminals.
Kevin w.
2025-05-24 13:25:54
Seems to be holding tight. After reading some reviews I was worried about it holding tight to batt post. It is very versatile and full of options. Reason I took off a star is cuz I have no use for the negative one. I only needed the positive. This one was perfect for my application so I bought the set anyways and glad I did. Should have the option to just buy one tho.
Jason E Hancock
2025-05-21 11:08:31
Sometimes ordering from Amazon is a crapshoot..... not this product. It's solid and works perfect!
Jdmrotiman
2025-04-05 21:46:19
I have this in my acura tsx, its rlly good, the quality of it is very nice and I can hook multiple terminals on it, Since this car is a sound car and has a lot of speaker’s inside, i think 4 terminals plus the holes with the set screws are enough. Would recommend for guys are uses their front battery or secondary battery for music.
Steven Brooks
2025-04-03 15:47:36
Fantastic product made my terminals look so neat not untidy like they were
Skeeter
2025-02-12 12:40:29
They cost a bit more but they offer the most connections and keep everything neat and tidy.
Stefan
2025-01-21 13:31:31
Servus!Vorab zur Info: Ich habe diese Terminals kostenlos zum Testen angefordert, was aber meiner Objektivität hinsichtlich der Bewertung keinen Abbruch tun sollte.Ich gebe hier bestmöglich meine Meinung über Qualität, Haptik, Funktionalität, Umweltaspekte und Preis-Leistungs-Relation ab.Die Terminals werden in einer hochwertigen Schachtel samt Schaumstoffeinlage geliefert.Der Grundkörper besteht aus einem Block aus CNC-gefrästem Aluminium. Die Verarbeitung und die Oberflächen sind absolut präzise und maßhaltig gefertigt, die Kanten allesamt sehr ordentlich angefast und entgratet. Die Anschlusskegel passen präzise auf die jeweiligen Pole der Batterie.Die vier Hauptabgriffe bestehen aus eingeschraubten M8 Inbus-Stehbolzen, mit Bundmuttern bestückt. Die acht Nebenabgänge an drei Seiten werden mit M5 Gewinden und Kreuzschrauben realisiert, dazu liegen auch noch Sicherungsringe bei. Alle Schrauben und Muttern sind aus Edelstahl (A2).Auf der plangefrästen Unterseite ist eine isolierende Folie aufgebracht.Über die elektrische Belastbarkeit muss man sich hier keine Gedanken machen. Der limitierende Faktor sind einzig die anschließbaren Kabel (bis etwa 100mm²).Hier noch die Abmessungen: Dicke 14,36 mm, Breite 44,90 mm und Länge über alles 80 mm. Die Länge ab Mitte Pol beträgt 55 mm. Das alles ohne Schrauben und Muttern gemessen.Von mir eine absolute Empfehlung und natürlich volle Sterne!Danke für eure Zeit, wenn ich helfen konnte, freut’s mich…
bobo
2024-12-20 18:48:34
terminal connector -positive is too big and negative is too big .Modification is needed . should be supplied with reduction plates to reduce size .
Recommended Products