Your cart is empty.
Your cart is empty.Get it soldered. Weller introduces a new soldering station designed for vocational and professional uses. The Weller station is ready when you adjust switch it on and start soldering.
T Kuzn
2025-09-07 17:15:26
Great product. I got the basic version and it doesn't disappoint. Solid construction and seems like it'll last a long time. Quick heat and comfortable handle.Recently started spending a lot of time getting back into circuit board builds and works great. It only comes with one tip so plan on buying the $18 5 pack of tips too if you need the precision point.Replaced a highly rated Yihua with this and very happy I did. That got the job done but the plastic sleeve had weak threads and the heat didn't always seem to be up to temp.
Ms. Moneypenny
2025-09-06 13:12:07
The media could not be loaded.
james j. macrina
2025-06-19 11:03:32
After returning 3 soldering stations that were not made in the USA, I gave in to getting a Weller. I usually buy what I read from the specs of the tool I want and disregard the manufacturers name. I restore antique radios which requires lot's of component replacement.Part of this restoration is removing components from 70 year old soldering joints which at times can be very difficult to do.Most of the other soldering irons that I had previously, except one, took quite a long time to liquify the joint. The tip's of the iron acted like a "heat sink" when heating the joint. At times the tip actually froze in place! It seemed like the iron tip temperature could not keep up? It struggled to increase it's temperature to accomplish the job!I wanted a station that I can control the temperature which I usually set at 690 F. One of my previous stations I wanted to set my temperature to 690 F . I had to dial in the temperature to 850 F to achieve that. I took a type "K" thermocouple and measured the tip when it was at 690 F and the set ping dispaly read 850 F ! Sent that one back! That station was around $55.The other problem with this station, which I would have never imagined, is that it put out so much electrical noise that I had to shut it off to listen to the radio I was working on! I usually turn on the radio after installing a component to make sure it's working. I mean this soldering station acted it was like an AM transmitter! Sent that one back.So, after 3 non "working" stations I gave in. This Weller station was $110. More than I usually would pay for a tool like this.First, This Weller station itself is heavy. I believe it uses some kind of variac transformer and not a solid state control, or rheostat. I like that right away. It was heavy and stayed in place when you pulled on the iron cord across you work bench. Second, it had a separate iron holder with sponge plate that was heavy also. Perfect!The LCD screen had large numbers you could read at a glance. Third, it was super easy to set the temp and ALSO you could see the temp drop when applying the tip to remove wires or components from a terminal lets say. You could see the temp drop on the LCD screen and the rapidly adjust the temp back to the set point of the station. (690 F) This iron is not a "quitter", it keeps up!The only little negative is that you have to buy "Weller" tips. Which are really not that expensive.You do not get all the other gadgets that these other iron's come with.It's well made and simple to operate. So, I guess I am set for life. This should last, finally!
JD
2025-05-18 10:53:05
The Weller WE1010NA Digital Soldering Station is a must-have for anyone serious about soldering. The temperature control is incredibly precise, and the digital display makes it easy to adjust and monitor. It heats up quickly and maintains consistent temperatures, which is perfect for both delicate electronics and heavier tasks. The included brass sponge tip cleaner is a great bonus and keeps the tips in excellent condition. The ergonomic design of the soldering iron feels comfortable during extended use. It’s well-built, durable, and performs like a professional-grade tool. Highly recommended for hobbyists and professionals alike!
C. Lorenzo
2025-03-28 17:59:08
I really trust Weller products and this one is a fantastic soldering station! Well built, heavy duty. Heats up and holds temp we'll. Soldering pen is really nice and well balanced. I've owned several sellers and many cheap solder pens and this one is the best (hands down). But the only thing that would make this even better, would be led lights on the pen.
Dominic
2025-02-11 11:39:10
The Weller WE1010NA is an excellent choice for beginners diving into the world of soldering. With its user-friendly interface and precise temperature control, it offers a seamless experience for novices. Its compact design and ergonomic handle make it comfortable to use for extended periods. The quick heat-up time ensures efficiency, while the digital display provides accurate temperature readings, crucial for delicate soldering tasks. Overall, the WE1010NA is a fantastic first soldering iron, offering reliability and performance at an affordable price point.
Oscar
2025-01-29 15:23:55
Es lo que buscaba, excelente equipo para mi taller de reparación.
phil
2025-01-16 18:44:39
Did not realise that this item was manufactured for the American market therefore it is no good for the British households. I only realised this when I was putting it together and the plug is totally different to British plugs.I am looking for a refund of this item and hopefully I can find a replacement which is made for British use. ☹ï¸
PRAKHAR TRADING COMPANY
2025-01-03 14:26:42
GOOD PRODUCT
Fehmi Najar
2025-01-02 11:01:41
My device just burnt the first time I used it. It is not mentioned anywhere that is a 120V ??
Recommended Products
