Your cart is empty.
Your cart is empty.Product Description
Wheel Accessories Parts offers an array of wheel spacers for autos, trucks, and SUV's.
Our Universal Wheel Spacers are offered in 4 Lug , 4 & 5 Lug, 5 Lug, 5 & 6 Lug, and 8 Lug Bolt Patterns with various center-bore diameters so that our universal design fits a large range of vehicle types.
UNIVERSAL WHEEL SPACER
Universal Wheel Spacers are not model specific, which allows each part # to fit multiple vehicle and wheel bolt patterns to fix minor clearance issues. (Note: Universal Wheel Spacer is NOT hub centric)
Our Die-Cast Wheel Spacers are available in 5 Thickness variations to satisfy a variety of clearance needs.
Thicknesses Available:
- 3mm | 1/8"
- 5mm | 3/16"
- 6mm | 1/4"
- 8mm | 5/16"
- 12mm | 1/2"
HOW ARE OUR UNIVERSAL WHEEL SPACERS MADE?
Die Casting is the metallurgical process of pouring molten metal into a mold cavity that's been created to replicate the desired part. After the molten aluminum solidifies, the part is removed for additional processes to prepare the part for use in its intended application.
Shot peening, creates a hemisphere of cold-worked material highly stressed in compression beneath the surface, significantly increasing the strength of the part.
Sonny
September 3, 2025
Great product! Works perfectly. Exactly what I needed.
Camaro11
August 23, 2025
Fit perfect
Preston
June 27, 2025
No concerns. Not the greatest finish, but they're budget wheel spaces. NBD.
C. Grandville
April 30, 2025
Keep in mind that I did not use these for lug nuts but rather for lug bolts. Meaning - as you can see in the photos- I have a four lug bolt hub - so how do you sandwich the spacer between the back of the rim and the face of the hub?Well I.....1) bought three long bolts from a hardware store with the same thread pitch as the lug bolts -2) took my Dremel and cut off the heads on the long bolts3) threaded three of the long bolts4) applied painters tape around the bolts so as not to scratch the rims5) reapplied the lug bolts one at a time - removing the long bolts one at a time6) still not centered around hub perfectly so I hand tightened the lug bolts to a point where I could still just push the spacer ring slightly to 12 o'clock or 6 or 3 or 9 to get it positioned/centered and then snugged it down so it wouldn't move and then finally hit it with an impact driver with a torque limiting bar.In addition, since it adds 3mm you are losing 3mm of thread length - be it bolt or nut. I did NOT buy longer bolts - you may or may not want/need to.
Outlaw
April 29, 2025
This thing is made perfect for my 325i 2006. I'm sure if you have a different vehicle and they say it will fit then without adoubt, its going to fit perfect. Every notch is where its supposed to be. They really took there time to get this thing spot on. No wiggle room or loose fitting at all. Easiest install I've yet to do on my car!
waltC
March 23, 2025
Worked with new wheels which were slightly rubbing against the brake housing.
Michael Stone
March 3, 2025
Would give zero stars if I could. Complete waste of my money
richie caraig
December 21, 2024
Fits well on my Prius prime
Jordan Speakman
December 5, 2024
Exactly as described :)
Recommended Products