Your cart is empty.
Your cart is empty.This Whiteline 30 millimeter fixed position sway bar - more grip - better handling - outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle.
Francis Balleza
2025-07-27 19:43:55
I weighed my truck 6,500 lbs no passengers.Icon stage 2 lift. About 3†lift. Freeway speeds or mountain roads I had a lot of body roll. This sway bar took a lot of body roll out. I would recommend it.
Ahmed Elhattab
2025-07-24 13:32:23
I think this part is designed to fit the 80 series land cruisers. Amazon says it fits the 2000 toyota land cruiser, but not the 1999 Lexus LX40 (they are essentially identical, however). It is the exact same shape as the 80 series OEM bar. With some minor modifications, it will fit the 100 series, but it almost touches the bolt of the rear lower control arm, and I had to bend and grind the brackets to align with the bolt holes on the axle. Also, because the part that connects to the end links is longer, it pushes the end links forward at an oblique angle (whereas it should be vertical).If you want and easy bolt on solution for the 100 series, I would go with the slightly thinner diameter (27 mm) BTR73 bar, is which actually shaped more like the OEM 100 series rear sway bar yet still thicker.
Pablovta
2025-07-21 15:18:32
Fit my '94 Landcruiser perfectly. Just bolt it in. A 10 minute job. Now my truck handles great even with the roof top tent, full rack and 6" lift with custom steel bumpers and loaded down with all the overland gear.
Ige Gustavson
2025-07-04 10:04:21
great for heavy rigs, but sad that you spend so much and still have to modify it to get it to work. mainly the two ends which are far too square for the links to fit properly, let alone move. they do such a nice powdercoating job and before you can bolt the links on, you have to grind the corners away and completely screw up the powdercoat, rendering a detriment as now the bar will rust from under the powdercoating.
Francis Balleza
2025-04-24 17:13:41
I weighed my truck 6,500 lbs no passengers.Icon stage 2 lift. About 3†lift. Freeway speeds or mountain roads I had a lot of body roll. This sway bar took a lot of body roll out. I would recommend it.
Ahmed Elhattab
2024-12-04 16:59:16
I think this part is designed to fit the 80 series land cruisers. Amazon says it fits the 2000 toyota land cruiser, but not the 1999 Lexus LX40 (they are essentially identical, however). It is the exact same shape as the 80 series OEM bar. With some minor modifications, it will fit the 100 series, but it almost touches the bolt of the rear lower control arm, and I had to bend and grind the brackets to align with the bolt holes on the axle. Also, because the part that connects to the end links is longer, it pushes the end links forward at an oblique angle (whereas it should be vertical).If you want and easy bolt on solution for the 100 series, I would go with the slightly thinner diameter (27 mm) BTR73 bar, is which actually shaped more like the OEM 100 series rear sway bar yet still thicker.
Pablovta
2024-11-26 10:57:20
Fit my '94 Landcruiser perfectly. Just bolt it in. A 10 minute job. Now my truck handles great even with the roof top tent, full rack and 6" lift with custom steel bumpers and loaded down with all the overland gear.
Ige Gustavson
2024-11-18 14:54:51
great for heavy rigs, but sad that you spend so much and still have to modify it to get it to work. mainly the two ends which are far too square for the links to fit properly, let alone move. they do such a nice powdercoating job and before you can bolt the links on, you have to grind the corners away and completely screw up the powdercoat, rendering a detriment as now the bar will rust from under the powdercoating.
Recommended Products
