Your cart is empty.
Your cart is empty.Product Description
Starlink Network Extension
Starlink Network Extension
Suitable for extending the Starlink service to any remote location at a High-Speed and Stable connection. Just connect the Starlink Dish through a Starlink Ethernet Adaptor, and feed the Master Bridge with the Internet service for transmission.
Point-to-Point Network Extension
Point-to-Point Installation for High-Speed Network Extension at a distant location up to 15km
P2P Multi IP Camera
Suitable for installing multiple cameras through a Switch at any near or far location and transmitting all the video data from the Slave Bridge to the local Master Bridge.
Point to Multi Point Installation
This Installation is suitable for connecting multiple Slaves Bridges to the Master Bridge, providing the Internet Service at each of the Slaves connected. At Each Slave location Internet will be available for Broadcasting Wifi, connecting through CAT6 cable or installing a Camera.
PRE-PROGRAMMED ADVANTAGES
PRE-PROGRAMMED ADVANTAGES
1 - Rapid Deployment: Swift installation, minimizing setup time.
2 - Plug-and-Play: Designed for easy setup, requiring minimal technical expertise.
3 - Consistent Performance: These bridges ensure stable and reliable connectivity.
4 - Cost Savings: Time saved on setup translates to reduced labor and resource expenses.
5 - Enhanced Security: Security features like encryption and authentication protocols
ensure data transmission security.
P2P Commercial Grade Wireless Bridge
Ubiquiti Point-to-Point and Point-to-Multi-Point are built to handle commercial-grade requirements. Outdoor Ubiquiti Extender performs high Reliability, Security, and Processing Power applicable to Residential and Commercial Projects.
BUNDLE MAIN FEATURES
- READY TO USE: Pre-configured for convenience, with no complex setup required; simply Plug and Play
- HIGH-SPEED: 5GHz delivers over 150 Mbps throughput for fast and reliable data transmission
- MULTIPLE APPLICATIONS: Ideal for expanding network coverage between distant buildings
- LONG-RANGE CAPABILITIES: Perfect for Point-to-Point and Point-to-Multipoint setups,
- NOISE IMMUNITY: Ensures peak performance even in environments with significant interference.
KIT INCLUDES
- 2 PRE-CONFIGURED UNITS
- 2 MOUNTING ZIP TIES
- 2 GIGABIT POE
- 2 POWER CORDS
- 1 INFORMATION SHEET
PRE-PROGRAMMED NanoStation Loco 5AC
OVERVIEW
- PRE-PROGRAMMED AND TESTED
- LONG RANGE UP TO 15KM
- REAL SPEED 150+ Mbps
- POINT TO MULTI-POINT CAPABILITY ENABLED
- POE PASSTHROUGH ACTIVATED
CHECKLIST PERFORMED
- AP AND STATION ROLES CONFIGURED
- LINK ENCRYPTION SET
- LINK PASSWORD PROTECTED
- QUALITY CHECK PERFORMED
- MANAGED IP CONFIGURED
- DEFAULT PASSWORD CHANGED
- INFORMATION SHEET PROVIDED
J. P.
2025-09-04 17:12:56
Installation took right on an hour, setup was immediate. Very much plug and play. Running at 400mbps with a 1gbps feed so I'd say the device is maxed out at a distance of 1500 feet in my installation. Do remember the Fresnel effect when setting up your system. Super important. My stations are 25' off the ground and LOS without any trees or buildings. Just to test I lowered the units to 15 feet and the speed dropped off to 100 mbps. Back up to 25' they go. Also these worked well in the rain with no drop out.
Senior Consumer
2025-08-23 17:37:35
This brand is great quality and works perfectly right out of the box. They also have an App that connects to the units for configuration and monitoring. Nine months and going strong in all types of extreme weather.
Ryan o.
2025-07-24 13:58:32
I purchased a cheaper alternative to this a year ago to establish a connection to a remote camera and a gate with smart controls. This cheaper option gave me headache after headache.After getting this, setup was a breeze. Literally just plugged in on both sides, aimed the devices at eachother and they connected. I didn’t even clear the trees. My devices are about 500ft away from eachother and I haven’t had 1 issue since installing.I didn’t even clear purchase an access point to setup by my gate nd camera though. These devices only have 1 Ethernet output on them and as far as I know do not broadcast a signal from the far end for wireless devices to connect to. But simple enough I just put an access point at the far end plugged into this device and works perfectly.
c
2025-05-26 18:49:50
Easy set up works great
Robert
2025-03-30 13:16:10
This product was not set to the instructions provided. The device was also not set for ptp mode. Extensive configuring and setting up the whole product from scratch cost us at least a day of install time.Is the product good? Yeah! Is the setup description accurate? No way.
Henry
2025-02-11 16:00:09
Easy setup with great connection and speed as was expected from Ubiquiti
jim fisher
2025-01-21 17:05:43
This device is just fantastic. It eliminates my cable that I was using cat6 or betterIt gives me the ability to access my ISP which is fiber and it gives me the ability to not have to have wires buried or running along the ground which I had previouslyI had a cable break and it was buried under the ground and I would have to pull it back through the conduit in order to replace itThis was easy to do. Easy to set up. It's range is fantastic. It's I can't say enough great things about this
Dave in Redlands
2025-01-11 16:34:16
This is the second set of these I have installed. First set was not pre configured. Get the pre configured ones. I’ve had the first set for about 5 years for internet to my barn. They work great. This set was for a family member. Easy setup.
Recommended Products