Your cart is empty.
Your cart is empty. Specification:
Name: Dual H bridge motor driver module
Working mode: H bridge driver (dual)
Main control chip: L298N
Logic voltage: 5 v
The driving voltage: 5 v - 35 v
Logic current : 0mA-36mA
Drive current: 2 a (MAX single bridge)
Storage temperature: - 20 °C to + 135 °C
Max power: 25 w
Weight: 30 g
Size: 43 * 43 * 27 mm
L298N motor controller board module, compatible with smart car power UNO MEGA R3 Mega2560
Package included:
5 pcs L298N Motor Controller Board Module
LT
2025-07-21 10:30:06
As of today I have used a couple of them in a project for more than a month and they are still working fine, without any issue. I will update my review if I will have any kind of problem in the future but for now, they are totally good.
odex
2025-07-08 11:39:58
So this is a basic sort of breakout for the trusty old l298 motor driver. Very simple, very reliable. Dual motor support per board, so 10 fully analog motors can be controlled for cheap. Pair with an encoder gear motor and you have the makings of a solid motor control project.
Tomic
2025-05-31 17:41:50
Works as documented. My only issue is that there is no heat compound between the driver and the heat sink! I recommened adding some, the controller will last way longer that way
RetEE
2025-05-23 11:13:52
Very nice boards. Made well and has a very good design, easy to install and control either with or without an Arduino. .Control rotation with a simple DPDT switch, control speed with a 555 timer through the enable on-off input. Or, use the power of control of an Arduino. All in all a very well built circuit. Circuit is semiconductor so it is not a total "Brick", i.e. it can be burned out if mistreated. .
Ralph Hunter
2025-05-11 09:45:49
Originally I did not like this when setup with a clone Arduino Nano. I setup all over again with an ESP-32S Wroom and had no issues at all. worked as expected. Not sure why the clone Arduino let me down but everything was backwards on the pwm. 0 was full speed and 255 was all stop. No matter what I did , i got the same results and output was not what I expected either, it was much slower than with the ESP-32S wroom. I tried with 3-4 of the arduino clones, same issue. So I switched to the ESP-32S which works better with my encoders anyway.
MacGyver Jr.
2025-05-10 18:32:04
Works great with Arduino, easy to wire and barely warms up with constant usage within rated limits.
Ricardo G
2025-04-24 14:08:46
One of them stopped working after I left it connected for like 3 months to a project. Probably MY fault it got a little dusty and I probably shorted it or something trying to wire it again.Great buy though!! ðŸ‘ðŸ¼
Tim W.
2025-04-21 12:26:49
They worked as expected
Furn66
2025-04-10 13:11:33
Good as described
Andrew Robertson
2025-04-08 09:56:33
I bought these for use with Arduino and Raspberry Pi projects that I will get around to soon.They came in a plastic box which I liked however they were not in antistatic packaging, slightly disappointing.One of them had faulty screw terminal, the tiny part inside which clamps the wire was missing on one of them, a production error rather than a fault of the seller. This didn't bother me as I had some spare connectors and just soldered another on in its place and not worth returning for.All the driver boards worked without fault at the first attempt. How durable they are I cannot state.I'm happy with my purchase.
ãƒãƒ³ã‚¯ã‚¨ãƒ³
2025-02-06 13:06:34
壊れã¦ã„ã‚‹ã‚‚ã®ã‚’売ã£ã¦ãã‚ŒãŸã€‚
Mark Zaiss
2024-12-10 13:32:26
I used 1 unit for a small autonomous car with arduino processor; works great.
John
2024-11-14 12:49:51
Only tried 1 so far but worked fine so hopefully others will too. There was no individual packaging for each module and all were just thrown into a plastic box, resulting in scratched heat sinks and boards. Other than the cosmetic damage, which will hopefully not affect functionality, fortunately other than a couple of slightly bent pins the components look ok but have not tested all modules yet.So far would recommend these modules but not this specific pack as due to poor packaging they could easily be damaged on arrival. Perhaps go for same modules but different brand/seller (the modules themselves are pretty much the same).
Recommended Products
