Your cart is empty.
Your cart is empty.Product Description
BoyoTec Thermostat Switch for Fireplace Blower Fan, Wood Stove, Snap Disc Thermal Fan Control
- "ON" AT 100℉ - Thermostat switch will turn "on" your fireplace blower fan when it reaches 120 degrees Fahrenheit (+/- 5°F).
- "OFF" AT 85℉ - Temp sensor will turn "off" your fireplace blower fan when it reaches 105 degrees Fahrenheit (+/- 5°F). This helps save power significantly.
- DURABLE: Temperature switch will last for over 100,000 operations under normal usage.
- Rated for environmental conditions up to 350°F. UL Approved up to 250 VAC and 25 AMP resistive load.
- Applicable Devices: Fireplace Fan, Woood Stove Fan, Geenhouse Cooling Fan, RV Refrigerator Cooling Fan, Solar Water Heater, Wall & Floor Furnace and a variety of Heating Equipment.
Applicable Devices
Automatic Working : The switch will "close" at 120℉ which allows power to the fan and turns it "on". When the appliance temperature drops to 105℉, the switch will "open" and stop power to the fan, shutting it "off".
Mel
July 30, 2025
Works great
Rex Giles
July 29, 2025
My old thermostat was 120° I replaced it with this 100 degree. Great choice. Now I can blow a little more heat from the fireplace that was being trapped when the fan shut off to soon.
jim webb
July 1, 2025
Works as advertised. Used on a blower motor
JPerry
June 26, 2025
For a Alderlea T5 Fireplace Insert - The 120°F ON and 105°F Off thermostat works much better for me than the original thermostat (slow to start) and the sister one that operates at lower temperatures and never seems to shut off until the stove gets totally cold. The 120°F ON and 105°F Off thermostat is a little slow to start, but faster than the original that came with the stove. Good enough for me. By the way, it is a perfect fit and is easy to replace the old thermostat with the new one.
tim harrison
June 16, 2025
Thermostat only lasted a week
Shane R. Hart
June 11, 2025
Price is good, but I've had to replace once a year on my wood stove heatalator.
Matt
June 6, 2025
I switched a whitfield pellet stove to this sensor instead of the problematic eye sensor it came with. Swapped right into a blank on the exhaust and easy to wire up! Now my pellet stove stays burning!
William Bailey
May 27, 2025
Needed one to kick in at 100° found it here and works great
Peter Krause
May 10, 2025
A little to long on the delivery. Works as stated.
Dany Bingle
April 5, 2025
Super pour le travail attendu de ce thermodisque recommandé
Client d'
February 5, 2025
Parfait
non
December 20, 2024
Ok
Den
December 3, 2024
que je peut remplacer l'original par unproduit moin dispendieux et surement meilleur
Recommended Products
$14.98
$ 7 .99 $7.99
$22.95
$ 10 .99 $10.99