Shopping Cart

Your cart is empty.

Your cart is empty.

Woods 55082305 AL Flex Fo7500050M Type Rwa Reduced Wall Flexible Conduit; 3/4 in X 50 Ft; Aluminum

Free shipping on orders over $29.99

$58.09

$ 29 .99 $29.99

In Stock

About this item

  • High strength aluminum alloy construction provides mechanical protection for conductors and cable
  • For use with listed connectors intended for NEC Type FMC (Flexible Metal Conduit)
  • Cuts 80-Percent faster than steel and is 66-Percent lighter than steel
  • Smooth interior for easy wire pulling
  • Superior corrosion resistance and built in flexibility for simplified positioning


Alflex-Type RWA 3/4-Inch Reduced Wall Aluminum Flexible Metal Conduit. High Strength Aluminum Alloy Strip. 5/16-Inch is UL Recognized Component. UL Listed in sizes 3/8-Inch to 3-Inch. 600-Volt. Alflex Type RWA is manufactured with a lightweight; high strength aluminum alloy. UL Listed per UL 1; Standard for Safety for Flexible Metal Conduit; ANSI/UL-1. Meets federal specification WW-C-566c. NEC Type Designation-Article 348; Type FMC flexible metal conduit. Alflex Type RWA Reduced Wall Aluminum Flexible Metal Conduit is suitable for the following installations: Environmental air-handling spaces per NEC 300.22C; Power and lighting branch circuit conductors and cables for connecting receptacles; luminaires; equipment; office partitions; etc.; Metal raceway for wires and cables per NEC ANSI/NFPA-70 Article 348; Motor feeder; branch; and control circuit conductors and cables; Class 1; Class 2; Class 3 Remote-control; signaling; and power-limited circuit conductors and cables; Fire alarm system conductors and cables of power-limited or non-power-limited fire alarm circuits; Voice; data; communications and video cables including CATV and optical fiber cables; Concealed or exposed installations per NEC Article 348 and the applicable NEC provisions; Elevators; hoistways; and escalators per NEC 620.21; As a grounding conductor for lengths up to 6-Feet 20A max as per 2008 NEC 250.1185; Electric signs and outline lighting per NEC 600.7; 600.31 1000-Volt or less; and 600.32 >1000-Volt; Hazardous location; Class 1; Div. 2; for flexible connectors only per 2008 NEC 501.10B2 and 501.30B; UL 1; 2; and 3 Hour Through-Penetration Firestop Systems: C-AJ-1462; C-AJ-1463; C-AJ-1464; W-L-1308; and W-L-1309; Listed wired fixtures per NEC 410.77C; Raised floors for connection of information technology per NEC 645.5D2 and 645.5D; Places of assembly and theaters per NEC Articles 518 and 520; Cranes and hoists per NEC 610.11C.


Pipa R.
2025-08-30 15:05:29
arrived in two days and wire flows through this effortlessly.
GHouse
2025-08-13 15:46:23
Works like a charm for the EV charging station. Make sure you wear gloves when dealing with these though as they leave dust on your hands.
charlie
2025-08-03 10:56:10
Added these from my sub panel into attic for future circuits. 👍
Robert Martin
2025-06-22 14:10:05
I believe it’s listed as being 50 feet. My package had 46 feet. I only needed 42 feet but had I needed 50 I would have been in trouble.
G.T.
2025-06-17 14:48:19
Reputable manufacturer, good looking product, easy to handle.
Mistral
2025-03-21 12:14:22
Even though the product was well wrapped in shrink wrap and in a proper box, it was ripped in the middle of the run. I spliced it using an appropriate coupling and used it anyway since I was already on site when I opened it and found the damage. I believe it was damaged at the manufacturer and packaged anyway. There was no damage to the packaging to suggest otherwise.Otherwise, this is a good product whose best feature is being lightweight. This makes a difference when working overhead.
Kindle Customer
2025-03-03 13:28:18
Good quality, light and strong.
G. Ching
2025-01-09 12:20:05
Lots easier to order from Amazon vs the not always reliable local hardware store. Arrived in good shape, but length was a little of the short side, about 3-4 ft short. But it was OK as I needed only 35 ft.