Your cart is empty.
Your cart is empty.Product Description
WSOOX has always been committed to providing cost-effective woodworking cutters for DIY crafters and weekend warriors. We've been selling on Amazon for years with a lot of results. We provide quality service. If you have any questions, please leave a message.
Specifications:
- Shank Dia: 1/4" Bearing Dia: 3/8", 1/2", 5/8", 3/4", 7/8", 1-1/8" Rabbet Router Bit Dia: 1-3/8.
- Cutting Height: 1/4" Rabbet Router Bit Dia: 1-3/8", Cutting Height: 3/8" Rabbet Router Bit Dia: 1-3/8", Cutting Height: 1/2" Blade
- Material: YG8 carbide alloy Body Material: solid hardened steel.Packing: plastic box
WSOOX 1/4 Inch Shank Rabbet Router Bit and Bearings Set
Features:
- Sharp blade provide the precise cutting. Sturdy shank with greater stability. Various size meet your different working needs. Smooth cutting reduce chipping and burrs
Package includes:
- 3pcs × Rabbet Router Bit
- 6pcs × Bearings
Six different bearing
Rabbet router bit set include 6 bearing interchangeable and adjustable for cut different size rabbet. Those bearings size are cover the majority of rabbet depths that you as a woodworker need to make.6 Interchangeable bearing cutting depths: 1/2", 7/16", 3/8", 5/16", 1/4", 3/16", 1/8", 1/16". NOTE: The short clamping of this product may cause bending.Use on CNC and other automatic routers.
Quick bearing change
High-strength precisive bearing cutting notch trims smoothly, reduces chips and burrs, and prevents tearing. Our bearings can be replaced quickly by hex key, which save lot of time for you.Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.Please check the shank size for your router takes to avoid ordering in mistake.
What is YG8 alloy ?
The main components of YG8 alloy are tungsten carbide, titanium carbide (TiC) and cobalt. This material has better strength and impact toughness than YG6 of similar products on the market. YG stands for hard carbide, and the number 8 means the content of cobalt is 8%. Our blades are made of this material with consistent internal and external strength, which is not easy to tear when cutting wood.
What is 45# carbon steel?
45# carbon steel means high-quality carbon structural steel with C=0.45%. It belongs to high-quality carbon structural steel with low hardness and high toughness. The materials is widely used in machinery manufacturing.The shank of our product is made of 45# steel, which is not easy to bend and is precisely processed.Anti-kickback design and CNC balanced.
Product Operation Guide
In order to ensure the longevity of the product and a good user experience, please follow the instructions to use these router bits. Please use the correct rotational speed and feed rate.
holly12345
2025-09-05 17:38:27
So I have only used the 3/8 inch bit so far but the quality for that bit was decent. I liked that the cuts were clean and I probably cut about 40 ft of board, and it was consistent all the way through. The packaging was nice too each packed in a plastic container. The bearings ran smooth as I did try multiple sizes to get the right depth for my project. Overall I’m happy with the cost and quality for a bit like this. Looking forward to testing the other sizes as well.
Ana Dorsett
2025-08-28 11:58:57
First time using it and had no issues, amazing price and options. A third of the price to lowes and home depot options but for the first try it's working amazingly.
peter
2025-08-23 18:17:35
They did what I needed. Got these to help make some replacement frames for my storm windows. I needed to make a rabbid for the plastic track to sit in. Used these with a ridgid trim router. They worked great. Packaging was just a box. But the the blades and bearing set each had a plastic sleeve to protect them. Would buy again if needed.
Customer
2025-08-14 16:35:18
I used the 1/2" Rabbet bit on some 1 1/2" southern pine and fluted both sides. In total, I routed 2,432 feet and the bit never seemed to slow down. The last pass was a clean sharp cut and as nice as the first. Great carbide on these bits. Worth the money!
Al Light
2025-08-10 14:11:41
Serving Tray
Christopher1818
2025-08-07 10:34:00
I read many negative reviews about these prior to purchasing them for a project I’m working on. Most of the reviews I read reported that they were brittle or dulled quickly. The price was so good, I decided to give them a go anyway.I have more experience with shaping knives than the average home tinkerer. I worked in a wood shop making doors from scratch for 4 years. Each of these knives is still sharp after routing 50 feet of hard, dirty, old oak. They may go another 50 feet before they dull to the point of burning wood edges. They've already paid for themselves. They’re not what I would call “top quality,†but they are excellent for the price.
Toby
2025-08-03 11:45:21
Needed some cheap router bits for a project. These fit the bill. Dull by the time I put a dado in a long board of pine for a window frame. Expected poor quality and they delivered. Perfect for the job i needed
stephen p. utz
2025-07-25 11:31:43
I was doing dados for some boxes and used them on my router table. Bearings helped for the depth. Good price too.
JESUS EUGENIO RICARDEZ DE LOS SANTOS
2025-07-12 13:54:33
Funcionan muy bien, buen producto
roberto
2025-07-10 11:29:58
Rotta al primo utilizzo, ed il legno era pino.
Tonny Studsgaard Petersen
2025-07-09 18:54:43
Used it to cut a groove in five oak shelf. Did it without leaving burn marks in the wood
ARW
2025-07-05 15:00:02
Used quite a bit, seem ok so far, are strong, sturdy and sharp would recommend.
Omar Saldaña
2025-06-29 16:20:09
Asà quedo la fresa después de como 25 mt lineales de rebaje a una madera se ve bien y no perdió el filo, el problema viene que cuando quise cambiar al balero se barrio la llave ale y tuve que hacerle con el esmeril de corte un corte para utilizar un desarmador y poder desmontar y montar el balero.Le quito una estrella por la llave ale y de lo demas la veo muy bien
holly12345
2025-06-13 12:35:43
So I have only used the 3/8 inch bit so far but the quality for that bit was decent. I liked that the cuts were clean and I probably cut about 40 ft of board, and it was consistent all the way through. The packaging was nice too each packed in a plastic container. The bearings ran smooth as I did try multiple sizes to get the right depth for my project. Overall I’m happy with the cost and quality for a bit like this. Looking forward to testing the other sizes as well.
Ana Dorsett
2025-06-11 14:02:06
First time using it and had no issues, amazing price and options. A third of the price to lowes and home depot options but for the first try it's working amazingly.
peter
2025-05-28 11:38:14
They did what I needed. Got these to help make some replacement frames for my storm windows. I needed to make a rabbid for the plastic track to sit in. Used these with a ridgid trim router. They worked great. Packaging was just a box. But the the blades and bearing set each had a plastic sleeve to protect them. Would buy again if needed.
Customer
2025-05-18 10:22:30
I used the 1/2" Rabbet bit on some 1 1/2" southern pine and fluted both sides. In total, I routed 2,432 feet and the bit never seemed to slow down. The last pass was a clean sharp cut and as nice as the first. Great carbide on these bits. Worth the money!
Al Light
2025-04-12 15:12:45
Serving Tray
Christopher1818
2025-04-11 20:51:22
I read many negative reviews about these prior to purchasing them for a project I’m working on. Most of the reviews I read reported that they were brittle or dulled quickly. The price was so good, I decided to give them a go anyway.I have more experience with shaping knives than the average home tinkerer. I worked in a wood shop making doors from scratch for 4 years. Each of these knives is still sharp after routing 50 feet of hard, dirty, old oak. They may go another 50 feet before they dull to the point of burning wood edges. They've already paid for themselves. They’re not what I would call “top quality,†but they are excellent for the price.
Toby
2025-03-31 11:32:12
Needed some cheap router bits for a project. These fit the bill. Dull by the time I put a dado in a long board of pine for a window frame. Expected poor quality and they delivered. Perfect for the job i needed
stephen p. utz
2025-03-08 17:22:01
I was doing dados for some boxes and used them on my router table. Bearings helped for the depth. Good price too.
JESUS EUGENIO RICARDEZ DE LOS SANTOS
2025-03-07 14:49:03
Funcionan muy bien, buen producto
roberto
2025-03-04 21:48:25
Rotta al primo utilizzo, ed il legno era pino.
Tonny Studsgaard Petersen
2025-02-10 18:54:04
Used it to cut a groove in five oak shelf. Did it without leaving burn marks in the wood
ARW
2025-02-09 13:36:57
Used quite a bit, seem ok so far, are strong, sturdy and sharp would recommend.
Omar Saldaña
2025-02-02 11:23:42
Asà quedo la fresa después de como 25 mt lineales de rebaje a una madera se ve bien y no perdió el filo, el problema viene que cuando quise cambiar al balero se barrio la llave ale y tuve que hacerle con el esmeril de corte un corte para utilizar un desarmador y poder desmontar y montar el balero.Le quito una estrella por la llave ale y de lo demas la veo muy bien
Recommended Products