Your cart is empty.
Your cart is empty.Product Description
Car Manual AC Oil and Dye Injectors Kit Hand Push Compressor Type 30ml/1 Oz w/ Quick Coupler 1/4 SAE Connector
- Suitable for air conditioning, HVAC, home office AC, service/automotive industry, car auto A/C adapter, compressor sickness caused by low oil, etc.
Specifications of HVAC Oil Injector Kit
- Material: Metal, Copper, ABS, Rubber
- Hose Length: 19cm / 7.48"
- Coupler thread size: M11 x 1.25
- Package Include: 1 x 30ml (1 oz) Oil Injector, 1 x Fluid Pipe, 1 x Straight Column Quick Coupling
- Flexible Hose Working Pressure (Max): 355-425Psi (24-29Bar)
- Flexible Hose Working Pressure: Within 285Psi (20Bar)
Function of Hand Push Oil & Dye Injector
- 30ml Push-in type filter, one shot may help and rescue a bad compressor which caused by low oil, no need to rely on other system.
- This oil dye injector is use with fluorescent dyes aim to monitoring leak, it can suit with all oil types(POE or mineral oil), and all refrigerant types.
- Adopt with reliable ABS, copper and rubber material, hard and wear resistant, heat resistant, extend service life span.
Features of Oil and Dye Injector Refrigerant Tools
- Come with a 13mm Low Pressure Quick Coupler, easy to snap in 13 mm female connector of manifold.
- Come with a 1/4 inch female SAE connector to connect with the 1/4 inch SAE male system ports (lower side preferred).
- Please use an adapter if there have different port size on your working system.
Greg Miller
2025-09-04 13:16:56
The injector worked well, but my A/C system was empty. I’m not sure if this would would for a system that has any pressure. I would think that a pressurized system may need an injector that’s made of metal.
Me
2025-09-01 18:36:59
ðŸ‘ðŸ»ðŸ‘ðŸ»
Customer
2025-08-28 14:26:06
The media could not be loaded.
Benny Thomas
2025-08-22 10:57:38
I bought this tool to use on a pressurized ac system and found out its only good for an empty ac system.Ill just put it in box for empty ac jobs.
A Classy car
2025-07-22 14:09:17
maybe I didnt use it correct but I could not force the contents into the low pressure line
Bob
2025-06-07 10:59:24
this unit cannot be used on the low pressure side, (and certainly not on the high side!) it slams the injector piston out. I had concerns about it blowing apart. If you have a gauge set, just add oil (use a simple cheap pet supply syringe) or leak dye into the LP hose and let it be pulled in during recharge. This thing is worthless to me.
Love shopping
2025-03-14 15:03:24
This works great!! no need to spend money on a steel version.
Kindle Custom
2025-02-21 15:35:42
Smooth injection. I use it for HVAC dye.
Mosqueda Mosqueda
2024-11-22 11:56:51
Muy buena compra, muy útil.
Recommended Products