Your cart is empty.
Your cart is empty.Product Description
Micro3 Double Distance Motorized Slider
Brief Introduction
Micro3 is not just an evolution, its a re-V-olution! The new V-shaped track design is inspired by the popular car modification culture - Hellaflush. Just like those modified cars with negative camber and lowered suspension, the Micro3 slider has exterme low centre of gravity and the ability to handle very high payload.
Basic Built
Hellaflush Design, 4 KG Payload
Inspired by the design of Hellaflush car modification, Micro3 uses a new 45-degree angled track design. It disperse weight to both vertical and horizontal direction, resulting in a stable platform with amazing 4 kg payload limit in any direction and the horizontal load is up to 12 kg.
Vacuum Adjustable Damping
The vacuum structure combined with special damping grease not only provides a solid damping smoothness, but also allows stepless adjustment of the slider movement resistance. The damping setting can be adjusted between 1 and 5. The higher the number, the higher the resistance.
Fast Switching Motor
The slider body and motor are independent and driven by a high-strength stainless steel Arri gear. The motor can be integrated and removed easily by using the quick release screws. It’s effortless to switch between a manual and motorised slider to handle different shooting conditions.
Functionality
Triple Support System
The stress point of the tripod support rods has been shifted from the center of the slider to the support components at both ends where standard 1/4" and 3/8" screw ports are added as well.
Car Film
You can have the Zeapon Micro3 mounted upside down or you can mount the Micro3 on a car easily.
Support Rods equipped
The entire Micro3 Series sliders come with tripod support rods, no need to purchase them separately.
All-round Belt
The Zeapon Micro3 comes with many improvements and upgrade that addressed every single area. The belt lock uses a large-diameter mechanical knob, no need to worry about damaging the belt or triggering it by accident.
Nesting Screw With Hidden Design
ZEAPON's unique nesting screw is compatible with both 1/4 and 3/8 inch standard, just press the screw and rotate it slightly, then the screw can be fully hidden to avoid scratching other devices and camera bags.
Large Mounting Base
The mounting base of Micro3 is approximately three times the size of the previous generation, it significantly increased the contact surface and allows your camera to be installed more securely and improves the stability.
Direct Power Supply
When your battery runs out of power, or you need extreme long shooting time, you could power the Micro3 using either a power bank or a power adapter with 5V and 2A standard.
Powerful Weapon of Macro Photography
The extremely smooth of the Micro3 will fearlessly amplify the probe lens against jitter. Double distance slide can hide itself extremely well, so that the equipment is not easy to out of camera wear.
Vertical filming
Micro3 series slider powerful motor allows you to film vertically, 4kg payload actually takes a huge advantage in most gear setups.
App Control
Waypoints setup
Using Zeapon lab to set the waypoints and speed up your motorized slider.
Easy connection
With one click, your slider is ready to work, once connected you can operate the slider within 15 meters wirelessly.
Timelapse mode
Start a timelapse, just this simple, connect shutter release cable with slider, and you are good to go!
Stop motion
More functions wait for you to explore!
N. Arafat
2025-09-02 20:42:22
The media could not be loaded.
TecnoguÃa
2025-09-01 14:18:54
The impression that I had when I was unboxing it was that I was looking at an exceptional product in terms of design and manufacturing... Every detail was carefully thought, this is a high-end product and I worth every penny.. just one little tip: make sure to clean it after use and before storing it... As you can see in the pictures attached you'll find lubricating fluid in some parts and you can ruin other camera gear if you don't clean your hands or the slider itself...
Tom Wade
2025-07-09 10:23:59
We do a lot of different video work. It can range from scripted short films, corporate interviews, commercials, or even product showcase videos. Recently, we have been getting a lot of product videos for social media in both vertical and horizontal content. We usually like to film using macro lenses with some green screen work and our gear needs to be repeatable and precise. What I love about this slider is not only is it precise and repeatable, but it’s also module with the pan and tilt motor. I can use it on anything meeting the client’s work including Timelapse and I confident it will get the job done. Only negative so far, it’s a bit noisy when the speed is dialed up so keep that in mind with mic placement. Very happy with this slider.
shane
2025-06-21 16:14:41
I purchased this item with the intention of using it on multiple tv series i make regularly. This slider so far has held up to everything i can throw at it. I have used it for overhead dolly shots, mounted it on rocks, used it on construction sites... all that and i've only had it a few months. I use it regularly with the sony fx3 so far it is a great purchase for what i do. easily the toughest budget slider out.I also had lost a rubber foot & zeapon was kind enough to send me extras! i they did get the replacements to my house quickly as well.My ONLY complaint about this slider is for some reason in the footage it sometimes bows and isnt totally flat so it might look weird when ramping footage. This also could be something easily fixable that i do not know how to fix.suggestion for zeapon if you read these reviews:1. I would suggest they sell them as an item in the store to make this process as easy as possible as i lost mine in the field & could've ordered some to where i was on location in another state vs sending them to my home.2. a firmware update to dampen/smooth the slider at the end of repeating moves. its a little rough when it changes direction at the very end of the slider. i noticed if you set it just before the ends, it does stop much better when repeating moves.3. making an optional brushless motor version of the pons unit. this would help for shoots where audio is paramount. although i have used this regularly with no issue when using it with professional audio mixers who mix from their bag and no one has complained about audible noise from the slider yet.
cristel gutierrez
2025-06-19 14:56:49
Zeapon Micro 3 is a budget motorized slider with great features the built quality is great.I'm removing 2 star for 3 reasons:1) How laud the motor is, is so loud, impossible not to notice if you are recording onboard audio, probably unusable for interview .2) When recording with focal lengths higher then 70mm you really start to notice how jerky the footage is, since it uses some kind of stepper motor you can tell it's stepping and not a solid flowing motion.3) Using the slider with out the motor is not easy, even on it's lowest setting it has a lot of friction and you will end up moving the tripod before it slides.
Daddo
2025-05-22 17:29:31
Good quality foam, easy to install and works great in my theatre room. Got rid of echos bouncing off my walls. I also purchased their bass traps which effectively cleaned up boomy areas in my room.
Jodi Friedman
2025-05-21 15:11:58
This was purchased in the bundle with the micro 3 slider. When sent to me it was separated out as two items. So I’ll review the entirety here. I was so excited when I opened it. The packaging and cases made it fun to open. That’s where excitement ended.I’d give the e700 micro 3 slider a 2 star and the pons pan/tilt a 3 star.I’d rate the iOS app and the customer service each a 1 of 5 stars.Here’s why: the app is the main way to adjust these units. It is limited in its abilities. There’s no way to ease in or out which is important. You can’t remove or adjust a way point for one item, you have to reset all three (slider, pan and tilt). You can’t control the speed you want for sliding if using pan and/or tilting because those can slow it down. And they rely on each other.The slider sadly had fairly jumpy footage both manually and motorized. I used the included arms to further secure the slider to the tripod and I tried varying speeds and made sure things were tight. Even so, I could see small jumps and unevenness that’s unacceptable in professional video.The pan/tilt: this was more solid. But they all need to work together for my needs. Also the pan and tilt really do need the app for seamless use and it’s not good.The pan and tilt movements did seem smoother. And the one unit used to rotate an object did look good so that’s why I said 3 stars for it.Now for the customer service, I wrote Zeapon numerous times over the past few weeks to try and get solutions to my issues, to learn if there’s any upcoming firmware and to see what else can be done or tweaked to get smooth sliding. But…. They didn’t reply! Not acceptable. So in the end, I boxed it all up and as best I could manipulated all the pieces into the cases and then boxes.And I have to say, the cases were sweet (high quality and nice looking) but doing studio based product work, that was not of importance to me.I’m sad this didn’t work out and now I’m on the search for a different slider and pan tilt… hope the next company I choose has better communication.
Dawn and Bill Fougere - Shea
2025-04-30 10:29:49
I’ve used other sliders over the years and can honestly say nothing comes close to this one, even far more expensive units. Analyzing the gyro data for any other slider shows the typical ups and downs, less than a gimbal but still there. This one shows nearly a straight line and the ultra smooth footage bears that out. The fact that it’s a double distance slider also makes it far easier to hide the slider on a straight roll-in shot and its vertical smoothness is simply unmatched.I was a bit sceptical about it prior to ordering because of reported issues with the app but I have had no such issues and there is an easy fix for the most reported issue (non-connection after firmware updates) - simply delete the app and re-install it. Yes, that’s a bit of a pain but it’s minor when compared to the quality of this unit and the results it provides.For product video, real estate and commercials, this thing will pay for itself in no time. Yes it’s twice as expensive as a GVM or Neewer but the results are worth 5 times as much. If you want professional results, you need to use professional equipment and this slider is professional in every way from the outstanding build quality to the ease of use.
Camera gear lust
2025-04-27 21:28:51
I've had both the edelkrone and syrp sliders and they were so unreliable I only used them a handful of times over the last five years. I've been blown away by zeapon and have used my e1000 on so many shoots already in the first two months. The manual controls are what I've always wanted in a motion control device, and the app is bulletproof where the others glitch out and stop working if your screen goes to sleep.Motor is strong and silent, carrying case is really high quality, build quality is 10/10
Customer
2025-01-18 14:32:02
I really think this is the best slider for the price that you paid. I have no concerns at all with it at the moment, really well made. I recommend it.
Recommended Products