Your cart is empty.
Your cart is empty.Product Description
Operating steps:
1. Connect the audio source output terminal to the RCA male head or RCA female head of this product.
2. Connect another terminal of the product to the audio input terminal of the power amplifier or other equipment, then can play music after the connection is completed.
3. Attention: RCA male head or RCA female head all can be used as the input terminal, and the other end is used as the output terminal. The connection cables of the input and the output terminal should correspond to the same color connection.
Ground Loop Noise Isolator for Car Audio/Home Stereo System
Feature:
1.This rca ground loop isolator is excellent in reducing the high frequency interference which caused by the electric equipment，and able to effectively improve the audio quality. (Note: please make ensure the noise not caused by the equipment failure.)
2.Either the RCA male or the RCA female can be used as an input, and the other end is used as an output.
3.If you are not completely satisfied with our products, please timely feedback to us, we will try our best to solve the problem for you.
Eliminating Buzzing Noise
Using this product can effectively eliminate the buzz in the car speaker /home stereo system.
Wide application
The ground loop isolator is suitable for automobile audio, amplifier, stereo receiver, car speaker, car subwoofers, and others. It is widely used in the recording studio, meeting rooms, car amplifiers, active subwoofers, players, computers, and other equipment.
Compact and portable
Such a mini and lightweight product does not take up much space and is easy to carry.
Package Contents
1 x RCA Ground loop noise isolator
1 x Use manual
Hilton V.
2025-07-31 12:13:06
I bought two of these to get rid of a hum coming thru the subwoofers of an 11.2 sound system, It was a really quick and easy install. Attached them to the back of the subwoofers themselves and it removed the humming noise instantly. Quality of sound from subwoofers remained high. Very Pleased
Alexander
2025-07-19 18:15:40
I had a problem with ground loop noise when using my DDJ-FLX6-GT with my desktop. I tried rewiring everything without finding a fix. This instantly cleared up the issue without adding any additional noise or reducing the audio quality in any way.
Mike P.
2025-07-10 13:36:16
I have a narrow use case, and I suspect that's the reason I had problems.The reason I beleive that is that when I connected this to my amp, it seems to be picking up noise from the power supply. Moving the unit around on the amp changes things a bit, but the cable is not long enough to really separate this unit from my amplifier, and this *needs* to be on the amplifier side of the run, as most of the noise sources lie between my mixer and my amp...so putting it on the mixer side would be ineffective at best.That said, the fact that it's susceptible to picking up noise via induction at all means it's exactly what it claims to be, that is, an isolation transformer.So I'm left with "it didn't work for me, but it does do what it says, so it will probably work for you". So, 3 stars it is.
Geist
2025-07-07 17:55:32
It seems this product have the potential to introduce noise into your audio system with some applications.I have a Topping DAC that I wanted to use to test a 600 watt stereo amplifier I purchased to drive two Bose speakers. It was a relatively inexpensive amplifier so I wanted to preemptively eliminate potential noise that I anticipated due to me purchasing relatively inexpensive RCA cables to connect the DAC to the amplifier.Once I received the RCA cables, I connected the male end of the ground loop isolator to the amplifier before connecting the the RCA cables to the stereo output of the DAC and ran it into the female end of the of the ground loop isolator. I was expecting to hear dead silence but was immediately hearing a low buzzing hum. When I disconnected the RCA cable from the ground loop isolator and the speakers went silent again. I thought that it is very possible the cheap Monoprice RCA cables may have been the problem, so I tested by placing RCA cable directly into the amplifier from the DAC. The speakers remained dead silent.I didn't have other RCA cables to test with this product so I tried using a mini AUX to RCA Y cable to plug my phone into amplifier. There was absolutely no noise with and without the ground loop isolator in the mix. The phone likely produces a voltage too low to introduce noise into the amplifier as I had to crank the volume all the way to the max to get decent gains. My DAC was likely the one creating the noise by sending a much higher voltage that may work well with the Monoprice RCA cable but you have to leave the ground loop isolator out of the mix.Unfortunately the this product didn't work to well with the intended application I wanted to use it for, not to mention it didn't appear that needed it anyway as the cheap RCA cables seems to be doing the job. The product is relatively inexpensive so I will hold onto for other potential applications that may come up in the future. At the very least the sound remained clean while using it between my phone and stereo amplifier, so there is hope for it.
Antonio
2025-06-03 12:29:30
This ground noise filter works great. It is very easy to install, just connect inline with the rca cables and your all set. It did away with annoying ground noise in my car stereo. This filter is very affordable and is a good value for the money. I highly recommend.
ChristopherJ
2025-05-21 20:44:03
After locating a couple of mini-phone to RCA cables,I hooked up the "ZIOCOM Ground Loop Noise Isolator" between the audio Line Output of my Mini-PC,and the Line Input of my MACKIE CM5 powered Monitors, which HAD been producing a ground loop hum.The ground hum WAS INSTANTLY ELIMINATED.I was pleased.BUT THEN, I NOTICED THAT, on occasion, IT WOULD DISTORT ON SOME BIG KICK DRUM HITS!I tried reversing the direction in and out of the "ZIOCOM Ground Loop Noise Isolator",but, STILL, THE DISTORTION CONTINUED.I had been quite hopeful, when it took care of the hum, but, the DISTORTION IS A DEAL-BREAKER.IF I can't play music through this device... I removed it.YMMV.
Review
2025-05-17 16:44:38
The media could not be loaded.
Willow
2025-05-06 09:17:37
Tried this on my Logitech subwoofer that hums while it’s powered. But sadly this did not stop it from humming
スターBB-8
2025-04-15 18:47:19
オルタãƒãƒ¼ã‚¿ãƒ¼ãƒŽã‚¤ã‚ºã«æ‚©ã¾ã•ã‚Œã¦ã„ã¾ã—ãŸã€‚ケーブルやアースä½ç½®ã‚’変ãˆãŸã‚Šå¢—ã‚„ã—ãŸã‚Šã€ã‚¢ãƒ³ãƒ—を分解ã—ãŸã‚Šã€å…¨éƒ¨ã®ã‚¿ãƒ¼ãƒŸãƒŠãƒ«ã‚’接点オイル塗布ã—ãŸã‚Šã€‚。。やれる事ã¯è‰²ã€…ã—ã¾ã—ãŸãŒãƒ€ãƒ¡ã§ã—ãŸã€‚諦ã‚ã¦ã„ãŸã‚‰ã€ã“ã¡ã‚‰ã‚’ãŸã¾ãŸã¾ç™ºè¦‹ï¼ã™ã“ã—ã§ã‚‚軽減ã™ã‚Œã°ã„ã„。ãã‚“ãªæ°—æŒã¡ã§ã¾ãš2個買ã„ã¾ã—ãŸã€‚到ç€ã—ã€å•†å“を見るã¨å°‘ã—é ¼ã‚Šãªã•ãã†ãªè¦‹ãŸç›®ã€‚ã§ã‚‚質感ã¯å¥½ãã§ã™ã€‚装ç€ã™ã‚‹ã¨ã€‚。。もã†ã€€æ„Ÿæ¿€ã—ã¾ã—ãŸã€‚。。ã‚ã‚“ãªã«æ‚©ã¾ã•ã‚Œã¦ã„ãŸãƒŽã‚¤ã‚ºãŒå˜˜ã®ã‚ˆã†ã«æ¶ˆãˆã¾ã—ãŸãƒ¬ãƒ“ューã§ã¯è³›å¦ä¸¡è«–ã§ã™ãŒã€è‡ªåˆ†ã¯SN比(大ãã„ã¨ãƒŽã‚¤ã‚ºã¨ç›®çš„ã®éŸ³ãŒã—ã£ã‹ã‚Šã‚ã‹ã‚Œã‚‹)ãŒä¸ŠãŒã‚Šä»¥å‰ã‚ˆã‚Šãƒ¬ãƒ³ã‚¸ãŒåºƒãŒã‚Šã€ç´°ã‹ãªéŸ³ãŒã•ã‚‰ã«é®®æ˜Žã«èžã“ãˆã‚‹ã‚ˆã†ã«ãªã‚Šã¾ã—ãŸï¼ã‚ªãƒ¼ãƒ‡ã‚£ã‚ªãƒ†ã‚¯â—¯ã‚«ã®ãƒŽã‚¤ã‚ºãƒ•ã‚£ãƒ«ã‚¿ãƒ¼ã¯ã‚ã‚Šã¾ã™ãŒã€ã“ã“ã¾ã§ã¯ãªã‚Šã¾ã›ã‚“ã§ã—ãŸã€‚è¿½åŠ ã§è³¼å…¥ã—ã¾ã—ãŸã€‚ã“ã¡ã‚‰ã‚‚1000Wオーãƒãƒ¼JBLアンプã¸é€šå¸¸ãƒ•ãƒ«ãƒ¬ãƒ³ã‚¸ã‚¢ãƒ³ãƒ—ã¨ã¯é•ã„Lowã®ã¿ã§ã®è¦–è´æ„Ÿæƒ³ã€‚んーã€ãƒ•ãƒ«ãƒ¬ãƒ³ã‚¸ç¨‹ã®æ„Ÿå‹•ã¯ã‚ã‚Šã¾ã›ã‚“ãŒæ˜Žã‚‰ã‹ã«SN比ãŒä¸ŠãŒã‚Šã¾ã¨ã¾ã£ãŸé‡æ„Ÿã‚る低音ã«ãªã‚Šã¾ã—ãŸã€‚ãŸã ã€ç¶ºéº—ã«æ•´ãˆã‚‰ã‚ŒãŸã›ã„ã‹ä½ŽéŸ³ãŒå¼±ããªã£ãŸã‹ãªï¼Ÿã¨éŒ¯è¦šã—ã¾ã—ãŸã€‚イコライザーè¨å®šã§ä»Šã¾ã§ã‚ˆã‚Šé¥ã‹ã«ã‚ˆããªã‚Šã¾ã—ãŸã‚ˆï¼è¶…é•·æ–‡ã§ã—ãŸãŒã€å˜˜ã ã¨æ€ã†ãªã‚‰ãŠã€€ãŸã€€ã‚　ã—　ã‚　れ　ï¼
ðŸµ
2025-04-05 13:39:40
Filtra ruidos de red pero distorsiona los bajos
Fabrice Baldo
2025-03-24 15:46:50
J’ai relié la sortie casque de mon téléviseur à un ampli et comme c’est très sensible, le bruit était énorme et le son inaudible. Avec ça le jour et la nuit. On entend encore un léger ronronnement au départ qui disparaît avec le son qui lui est revenu impeccable.
Lorenzo Coccia
2025-03-08 16:53:46
ha efficacemente ridotto il rumore dai miei speakers
christoph kilciksiz
2025-02-15 13:41:45
Hat mir nicht geholfen
Recommended Products