Your cart is empty.
Your cart is empty.Product Description
Michael J. Bruening
2025-09-04 16:59:06
Really enjoying these lights on my 2020 F-150 XLT that I installed in Nov of 2024. I waited to see how they would perform over an extended period and they're great. They were pretty easy to install with a plastic trim removal kit that allowed me to pop both lights out from the front. Plugged directly in and work as described with bright white light. Highly recommend these lights and I wish they had an amber color available.
Ethan
2025-08-04 18:53:11
I bought a pair of these(without the DRL function) two years ago after the OEM’s became waterlogged from the inside out. They’re bright, look oem, and are easy to install with 15 minutes of free time and some plastic trim tools. I have Bambi mode enabled on my truck so they are on anytime the lights are. Last week one burnt out on me which was a bummer. So you know what I did? I ordered another pair. Why? Because they’re $60. I’m still saving $450 over Rigid even after buying the second set. In short, you get what you pay for. And while I did have to replace them after two years, they still performed great for the money so the value is there. In conclusion: if you want an LED replacement fog light whilst still saving money in an effort to survive in todays economy where milk and broccoli costs $100 then these are a good option.
Customer
2025-07-07 11:52:01
Exceeded my expectations. Bright & provides excellent coverage. Lights up the road ahead as well as both the sides of the road. Matches my 6000k LED headlights perfectly. Easy to install once I understood how to get the old driving light housing to release.My only complaint is there is a very slight amount of side to side “play†in the new lights (maybe 1/8â€). However, I haven’t noticed any vibrating/shaking in the light pattern while driving so I still give it 5 stars.
Ryan
2025-07-03 11:29:40
For the install, grab some trim removal tools and some long flatheads. If you have a Milwaukee (or similar) ratchet with a Phillips head socket it makes removing the adjustment screw way faster. I was most successful sticking a screwdriver down the outside of the fog light to undo the outside clip, and then leaving that tool there to hold tension while I reached behind the bumper to use a trim removal tool to pry up the clip on the inside. The clips maintain tension so once you feel them pop go ahead and start pushing the light out from the back. Note that removing the 10mm bolts on the front air dam and pulling that off takes about 40 seconds and will give you more room to slide under the bumper and move your arms.Install is just the reverse, but way easier. These are a little heavier (and nicer) than the OEM fog lights. Just slide them in until they click. I reused the hardware from the factory fog lights since I already had it in my hands, so I can't comment on the provided hardware.They're nice units, crystal clear, super bright. The black housing looks nicer when they're off as well. An easy upgrade that looks slick too. Can't ask for much more! I had Z-Offroad fogs on my 2011 F150 as well and they ended up being brighter than my headlights.
bro30a
2025-06-05 12:42:53
Pros- Lower price than most. Good fit and appearance very bright, protective packaging, labeled left and right, plug and play. Cons- No instructions but several helpful You Tube videos. Note- Adjust beam to 4†below low beam or will send heavy glare to oncoming drivers.
Evan
2025-05-18 14:04:10
Got them installed a few weeks ago and they're decently bright. Black housing is made from metal. Just a heads up (no fault of the product) but removing the stock fog lights were a pain but installing these were simple and straight forward.
Mike B
2025-03-11 11:36:44
Quality product and easy to install. Removal of the original lights was difficult to do, I didn't have to remove the tires because I installed a leveling kit on the front. I would splice in two new connectors once you have them out, I destroyed on disconnecting it.
Good lights
2025-03-07 16:01:27
That were exactly as advertised.
Noushad Abdul
2025-02-15 13:02:48
Ontime delivers as same fit gor my truck..quality products and reasonable price.verygood bright and beautiful.
Ptzel2000
2024-12-25 18:49:49
Set it up with adjustment screws that came with it no way to adjust them right, had to use the original Ford adjustment screws much stronger and Spring are twice stronger than the cheap ones supplied with the fog.2 x first pics after 2x last ones beforeNet advantage
Nick
2024-12-13 10:52:38
I just installed these after the OEM LED fog lights on my 2018 Lariat filled with sand and salt dust, and were completely corroded. The hardest part of installation was removing the old OEM lights. I managed to do so by peeling back the wheel well liner. Removal of the tires is not necessary as per some Youtube videos. Further, the corrosion had completely destroyed the 9005 headlamp pigtail, which I had to subsequently cut off and replace. Now that these are installed, they look amazing, and cast much more light. Only time will tell if these last and do not suffer the same fate as the OEM models. I will add an update if they fail prematurely. Otherwise, for the price, these are worth a shot!
Matt Bingeman
2024-11-27 15:04:47
Install was easy and simple. I upgraded from basic halogen to these - they look amazing and are plug in play. Not sure about the other options but you can’t go wrong with this one. Longevity I cannot speak for as it’s been 2-3 weeks. No issues this far.
Freakstwo
2024-11-19 12:26:31
Off the start I bought these to replace the morimoto fog lights I had that failed. My morimotos were 3 times the price, half as bright as these, and only lasted less then 3 years.So far off the start, these lights are brighter, same build quality, and cheaper. If you’re debating on getting these or the morimotos, definitely get these.That being said the one thing I read in reviews is if you plug them in and they don’t work, rotate the connection. My driver side connection didnt work the way it “lines up†with the tab, but my passenger side plugged in the way you would figure it would.
Recommended Products