Your cart is empty.
Your cart is empty.Product Description
Our wireless crane remotes have exceptional features including superior quality, safe and reliable performance and high durability.
Main advantages are attached below.
- Variable voltage.
- Humanized designed transmitter and receiver. Comfortable to hold and easy to install.
- Built-in antennas in transmitter and receiver for more stable and longer distance signal.
- Quality integrated circuit board with advanced microprocessor for you to work more efficiently with the humanized wireless crane remote.
- Ergonomic designed transmitter with durable buttons and metal contacts provides you with an unprecedented comfort experience.
- Thanks to the LED lights on both of the transmitter and receiver, operating status and battery level can be glimpsed easily.
- It's easy and convenient to press the Big Mushroom Head Emergency Stop on top of the transmitter when emergency occurs.
Safer, More Efficient, Durable and Convenient
High quality circuit board
- 360 degree barrier-free remote control;
- Strong penetration, no need to aim;
- Advanced processor with multi-bit Hamming code: fast,high security,high precision and 100% error-free coding and decoding.
Durable shell with anti-collision corners
- EU standard mushroom head Emergency Stop button
- Quicker for safer - Big EMS on the top of transmitter for you to easy and quick to press.
- 8 anti-collision corners
Durable buttons
- Metal Contacts
- Durable silicone buttons for you to press more than 2 million times.
Ergonomic design with non-slip texture
- Glass fiber reinforced nylon shell.
- Unique non-slip and ergonomic design.
- Comfortable to hold in hand.
Silicone push button
Comparison between H-series remote and F21-E1B:
- The magnet key is easy to rust， attract iron fillings, and are often lost.
- Easy to operate - More convenient Emergency Stop for you to press quickly.
High quality cable
- Easy to install - U-shaped connector;
- Thick copper wire - fast conduction;
- Thick insulation layer - safer.
LED indicator signals on both transmitter and receiver
6 indicator signals at different places for you to know the battery power level or troubleshoot a problem easily.
Q: What should I do if I lose the transmitter or the receiver is damaged?
A1: Just provide SN/CH codes on the transmitter or receiver, we can immediately match you a new transmitter/receiver. You don't need to disassemble wiring to save time!
A2: It's safe, simple and efficient for the receiver automatically searches the transmitter channel. Do not need professional equipment to pair a new replacement transmitter/receiver.
All-included fastener kit
Easy to install!
C
2025-08-06 15:42:34
There's an overhead gantry crane in the old barn. It's a huge setup that runs on some huge steel beams. I wanted to use it, but the control didn't seem to work. This got it working in no time.I didn't bother trying to install this myself. I probably could have, but I have an electrician on my payroll, so I made him do it. He said there was nothing difficult about it.Once it was installed, it worked great and is extremely easy to use. The crane is rated at 10 tons, so I can move all kinds of stuff around that old barn. Well, maybe it's better to call it a Morton building. That's what my wife's grandfather called it when he was still alive. It's a big, metal building with the crane inside, attached to some huge beams.I have been using it to move sort of heavy stuff all around the barn for a few months now. I haven't picked up anything close to 10 tons until recently. I had a lathe delivered, and it was over 5 tons. I had the driver pull his truck into the building, hooked the lathe up to the crane, lifted the lathe, and had him drive out. Then I put the lathe down where I wanted it. Everything went great. Granted, all the control did was control everything, if something were to catastrophically fail, it would have been the crane's fault, but still, it worked. The control going out in the middle of having a 5+ ton lathe dangling off the ground would have been...bad.I should add that I don't have much experience with cranes like this, but I can use it easily. It's pretty simple to understand.
tuggnutt
2025-07-07 16:47:52
The instructions are a bit confusing but figured it out. Had to use 6 diodes on the crane so the hydraulic pump only runs when asking for a command. Would have cost thousands to replace the pennant and other factory controls.
Joel S.
2025-05-17 15:49:23
The sloHEXtted 12 Channel Button Industrial Wireless Crane Radio Remote Control is designed for single and double girder overhead bridge travelling gantry cranes, offering extensive control with 12 channels. It operates on a wide voltage range of 24-264V AC/DC and includes both a transmitter and receiver, with the receiver supporting multiple voltage levels (24V, 110V, and 220V) for increased adaptability. While its complexity may require additional operator training and its durability must be ensured for industrial use, this remote control system provides a versatile and comprehensive solution for effective crane operation.
SG
2025-05-15 17:07:19
Needed 8 jog remote control buttons (with 2 remote). All 12 buttons are dry contact which is very useful. Remote worked > 100 feet. Works great.
Peter Griffith
2025-04-22 17:07:14
è progettato per gru a ponte itinerante a cavalletto . include sia un trasmettitore che un ricevitore. questo sistema di controllo remoto offre una soluzione versatile e completa per un funzionamento efficace della gru. Facile da accoppiare e riprogrammare. è dotato di un pulsante E-Stop per la vostra sicurezza. Il trasmettitore leggero e resistente utilizza un design ergonomico, comodo da tenere in mano.
Mar
2025-04-12 16:17:18
Nice product, does what it says.
Er Magico
2025-02-19 12:42:26
telecomando per gru senza fili a 12 pulsanti offre un controllo preciso e versatile delle operazioni di sollevamento, eliminando la necessità di comandi cablati e aumentando la sicurezza dell'operatore, infatti con la tecnologia wireless, l'operatore può controllare la gru da una distanza sicura, aumentando la produttività e la sicurezza, con ben 12 pulsanti che permettono di controllare diverse funzioni della gru, come il sollevamento, l'abbassamento, la rotazione e lo spostamento, La maggior parte dei telecomandi per gru è progettata con un layout intuitivo e pulsanti di grandi dimensioni per facilitare l'utilizzo anche con guanti.
Theman & GF
2025-02-13 11:09:13
I wish it had a couple more options*, or even 14 buttons total. The start button will double as a “bonus†switch. First you un-twist the emergency stop, followed by pressing the start button. Now everything is active. A subsequent press of the start button allows it to run another control (ie button 13). In my mind, for a lot of setups, this means:Row 1 and 4 are winch up/down for crane 1 and 2.Rows 2 and 5 are East/West for Crane 1 and 2Rows 3 and 6 are North/South for Crane 1 and 2,And lastly, the start button would relay join (up on the cranes) the up/down, N/S/E/W buttons while being held. (If it had more buttons you could have a couple/uncouple/ temp couple button).*There is aÂ
programming cable available
 which might give you more flexibility/options, depending on your crane and current setup. I didn’t need it for my application.I haven’t tested the range, however they claim 100 m. I never have to work anywhere close to these distances from the receiver.There are safety provisions built in that if you press any buttons on the same row at the same time, they both shut down until both are released. You can run multiple rows simultaneously. That is the one issue with my scenario above, that nothing would be stopping you from pressing Row 1 up and row 4 down while holding the start button. Potentially your relay join up top would disconnect your rows 4-6 automatically.I can’t comment if these meet the safety specs your company would need for lifting devices, but the function seems good. I do notice maybe a 1/10 of a second delay/continuation from button presses if you are needing to “jogâ€
Recommended Products