About this item

• 【304 STAINLESS STEEL WATER FLOAT VALVE】304 Stainless Steel Water Float Valve used 304 stainless steel as the valve body, 304 stainless steel is high end material, never rust, long life. Also the screws are stainless steel as well, they are environmental and food grade materials.
• 【1/2" to 3/4" FITTING 】1/2" Water Level Float Valve is the popular size,1/2" male thread is the float valve size itself, the automatic float valve comes with 1/2" to 3/4" stainless steel fitting, so it will be 3/4" float valve,so you can use the adapter if your pipe is 3/4", also the float valve comes with free 1/2" elbow and tefon tape, it's helpful if your application needs them. NOTE: Before installing,you need to use teflon tape on the male thread to seal,if the thread leak water,that means the teflon tape is not enough, you need to increase telfon tape,we normally hand-tighten the valve with 7-10 layers of PTFE tape to eliminate any leaks.
• 【AUTOMATIC WATER LEVEL CONTROL VALVE】304 stainless steel fully auto fill shut off water tank float valve is an automatic shut-off valve, when the water level reaches the control position, the float valve will automatically stop the water supply, when the water level drops, the float valve automatically open the water, so it is a fully automatic water level controller
• 【FLOAT VALVE COME WITH METAL CLIP】Water Float Valve comes with metal clip,so you can mount the valve on your water tank, it's very convenient for people to use, and it's very helpful.The clip is stainless steel, never rust. Double check the size of the clip before placing an order, see if it meets your application size.
• 【NO ELECTRICITY REQUEST AUTO FILL WATER SHUT OFF FLOAT VALVE 】A Float ball inside allows water to flow until a specific level is reached. Once the water reaches this level, the float valve will be pushed up with water due to buoyancy and stop the flow of water. When the water level starts dropping, the valve will open again, and the water will start to flow again,so no electricity needed.
• 【WORKING WATER PRESSURE 】Automatic water level control valve works with 0.2 to 10 bars water pressure,if water pressure is lower than 0.2 bars,the float valve will not suitable for using, it will not work. Working Temperature: 0°C~100°C & 0-210°F
• 【APPLICATION】1/2" float valve maintains the level at set point without a noticeable variance in level. This float valve was used to maintain the level in an exterior fountain, on a yard fountain,for a rain gutter garden project,using it to make an automatic shut-off for swimming pools,for Fountain ReservoirLivestock Troughs, used as automatic swimming pool filler, for keeping water level constant in my aquaponics setup,used to auto fill my fish aquarium after partial dewatering during cleaning, for watering livestock, for fire departments storage tanks keep water full etc.