Your cart is empty.
Your cart is empty.Product Description
500A Winch Relay Solenoid
Compatible with 8000lb-17000lb winch with DC 12V
Wireless control kit built-in antenna design, wireless control range max. 150ft
Winch Control Box for Relay
Widely used for 8000-17000lbs Electric ATV UTV Winch ,Comes with winch jump quick connect cables with lugs
Remote control with Receiver
1pc 12V Wireless Winch Receiver + 2pcs 12V Wireless Winch Remote Control Range max 150ft
AWG4 cables with lugs
AWG4 cables with lugs for 500A Solenoids,better for installation for relay solenoids.
Winch Control Box
- This winch solenoid contactor box is used for protecting the Solenoid Relay and help organize cables of 8000-17000lbs Electric ATV UTV Winch.
- Made of high-quality ABS plastic
- Pre-Wired Design: You only need to connect the wiring harness of the relay directly to the winch
500A Winch Solenoid
- Wireless control kit built-in antenna design, wireless control range max. 150ft
- Pre-cutting mounting bracket for easy installation into control box
- Compatible with 8000lb-17000lb winch with DC 12V (series wound and permanent magnet)
DBrooks
2025-09-04 12:40:21
No wiring instruction included and the motor jumper cables were too short (3 inches) 76 millimeters! Otherwise, functioned correctly as expected for this price point.
Dennis Virostko
2025-09-03 12:52:01
Works well. Fixed my issue with the wench. Pretty easy to install.
jonathan Franco
2025-08-11 17:19:09
I didn’t like that it didn’t come with instructions, I messaged the seller they did send me the correct instructions but it’s different than advertised, and those instructions still didn’t even work I got the solenoid to work with the button in my cab but not with the wireless controller and that’s the main reason why I bought I even tried different combinations with the wirings but nothing worked would not recommend buying.
John L
2025-07-27 13:50:19
I've been using this Relay as a In-Cab ON/OFF Switch for my SmittyBilt 10K Winch. So far it's been working perfect. Only issue is the lack of any Wiring Diagram. Took some Trial and Error with help a little Internet help to get the wiring done. Good Value
Dan
2025-06-13 17:49:32
I didn’t get a new box or a long black cable that goes from the winch to battery, not sure if that was a miss or expected, either way I resused my own. It was a serious stretch of the wires for my particular 12000lb Badlands winch from the control box to all the needed hookups, and I mean not a 1/2 inch extra wire to spare. (I mean, nice clean tolerances when finished but dang it’s harder to mess with) The instructions on the product that’s on this webpage is what to use! I went an extra step and made 3 Y-cable adapters from the wireless harness (2M>1F) to accept both the wired and wireless ports to where there was only1 blade that handled both respective sockets on the top of the relay - clean solid connection and so easy to do for my set up. So now I have two wireless AND the wired remote working at my desecration. Maybe my old relay or wires were bad from the start but I could swear this new relay/wires help my winch pull stronger and faster now which is a massive advantage. Today is 6/3/2024. It’s day 1 so I’ll come back and update one day but yeah for now 4.9/5 stars, would definitely recommend.
Aj
2025-06-06 10:00:41
The product works great as long as you don’t follow any of the pictures they have for installing it we had to pull my buddys relay box apart to figure out to wire this one up because they have two different sets and both are wrong and the kit was missing two screws that hold the relay down in the box I called Amazon for both of these they sent me a new kit and same problems again
Benjamin H.
2025-06-05 10:45:55
Instructions are very poor had to return the item do to not working with the which we had. Ended up purchasing new winch
Bobcat
2025-06-03 10:53:58
Works
Bill
2025-04-27 09:37:27
IGNORE the wiring pics on the page. Adding the correct one seller sent me. After figuring it out it worked great.had to move the main wiring threw the box to match the proper posts but it's a pretty easy install.
Leslie
2025-02-20 11:07:35
They work great.
Mr Cummins
2025-01-26 11:39:47
The product was easy to install, however, no wiring diagram and I was upgrading from an older winch controller. The pictures in the description were misleading. Did get it figured out and everything works well.
Jacques
2025-01-12 14:17:42
Très pratique pour travailler en forêt.
Mr.Kacic
2024-12-31 13:50:15
Didn't work out of the box. I'll have to find a better brand
Recommended Products
$16.99
$ 7 .99 $7.99