Your cart is empty.
Your cart is empty.Yohan
2025-09-03 15:22:57
I ordered this switch to replace the forward/reverse switch on my shaper. After review and bench testing this switch, it should do the job. The switch appears well built and operates smoothly; all contacts check out well on continuity tests. The switch comes with two cable glands and a gasket.
Rolando
2025-08-21 15:45:25
Directions were not that great
Kenzi falk
2025-05-18 17:06:56
I got this switch to use on my metal lathe. I was hoping it could be used to reverse the direction of the motor. I t won't work for my motor because the type of motor on my lathe. I will find another use for it. The switch is a good switch with good contacts and positive locking action in all positions. The cable glands are nice but take up a lot of room in the box. The box/housing is real small for the number of wires that are required to power a motor. It is hard to get all the wires into the box and connected to the switch. I would not get this switch again because of the small housing.
B. James
2025-05-08 12:32:49
Very versatile switch if you know what you’re doing
escorpion
2025-03-29 12:34:22
economical, need time to figure it out, but works fine
Darren
2025-03-25 17:15:09
The switch itself works great, but the wiring area is WAY TOO SMALL! You can't wire anything into it. Make the box bigger.
Client d'
2024-11-26 11:59:43
Eu besoin pour d'élections chargé de mais batteries solaire fonctionne bien
Jim P.
2024-11-19 17:06:52
Good quality, would buy again
Recommended Products
