Shopping Cart

Your cart is empty.

Your cart is empty.

2Pack 25KG Digital Servo High Torque Full Metal Gear Waterproof for RC Car Crawler Robot Control Angle 180°

Free shipping on orders over $29.99

$32.89

$ 16 .99 $16.99

In Stock

1.Style:1 Pcs Red 20kg


  • UPGRADED VERSION: DS3225 25KG High-precision, Coreless Stainless Steel Gear, Fully Waterproof, Digital Servo. Send with two 25T double-locking metal servo horns;
  • HIGH PERFORMANCE: equipped with high precision potentiometers and high-resolution digital chip, fast response, strong anti-interference ability, low noise, fast heat dissipation;
  • HIGH ROTATION: well-controlled, 180 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities;
  • HIGH QUALITY: waterproof rubber seals screws,made of first-grade material ensure the longevity of the products. CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well. Please note that the sizes match. If you run into any problems, please let me know!


DS3225MG RC Coreless Stainless Steel Gear Waterproof Digital Servo are ideal for cars, airplanes ,and robots.

High-speed big torque digital servos.

Fully Water-proof, Light Weight,Stable, fast heat dissipation, sensitive and Less Noise.

Power cord is longer up to 11.6inches(29.5cm), and also send with two 25T adjustable metal servo arms


Electrical Specification:

Operating voltage range: 4.8-6.8V

Operating speed ( 5.0V ): 0.15 sec/60 degree

Operating speed ( 6.8V ): 0.13 sec/60 degree

Stall torque ( 5.0V ): 21kg/cm

Stall torque ( 6.8V ): 25kg/cm


Control Specification:

Control System: PWM (Pulse width modification)

Pulse width range: 500-2500μsec

Neutral position: 1500μsec

Running degree: 180° (when 500-2500μsec)

Dead band width: 3μsec

Operating frequency: 50-330Hz

Rotating direction: Counterclockwise (when 500~2500μsec)

Gear ratio: 275

Bearing: Double bearing

Connector wire: 11.2inches(285mm)

Motor: 3-pole(s)

Waterproof performance: IP66


Product Specification:

Standard Dimensions: 40 * 20 * 40.5mm

Weight: 67g


Package Including

2 x DS3225 25kg Digital Servo

4 x 25T Adjustable metal servo arm

2 x Accessories set as shown


wesley terry
2025-09-01 20:59:52
I have purchased 3 first for my Arrma Granite 4x4 4S lipo and it has and still can withstand gruelling punishment. I bought two more for my Redcat Everest 10 crawler and it's powerful enough to turn through all sorts of abuse precisely or forcefully to navigate any terrain wet or dry. I am thoroughly impressed with their performance and great price!!
Josue
2025-08-22 15:51:50
Used it on a snowplow and has a lot of torque. Should work great as a steering servo for a stock setup
Dean
2025-07-19 09:31:06
The media could not be loaded.
Customer
2025-07-16 14:14:24
I've bought tons of the DS 20kg/25kg servos and love them. Needed a servo to handle the 4WS setup on my Tamiya Juggernaut and figured why not go with the 30kg. Servo is strong and steers the truck well, but it is very slow. I pretty much need to start turning a foot or so before I actually want to turn, not good in a 10lb+ truck that moves at 15-20mph. So slow I'm probably going to replace it with a 25kg or similar. Unless I somehow got a defective unit (works great otherwise), I wouldn't bother with this particular servo for RC use unless its in a rig where steering speed doesn't matter at all.
Rob kampa
2025-07-07 15:52:44
Have only had for a little while but is good. I am using this on a 1/10 rc crawler
Edwin M.
2025-06-20 15:48:18
More than enough torque to steer Bowser kart rc, speed a little slower than expected
Gadgeteer
2025-06-07 12:56:45
Nice motor. I haven't put it under serious stress yet, but it seems sturdy enough. I bought it to re-motor (replace) the steering servo in an old "Rock Runner" RC car that I have. It was a little bit larger than the "standard profile" so check for fit if that matters. Side to side (and front to back) was okay. It was a little taller, up from the mount, by about 5-8mm (estimating), and slightly longer below the mount, by maybe 2-5mm (estimating). The mount itself was also slightly thicker by about 2mm or so (estimating). If you have the clearance it won't be a factor. It should drop right in place of a standard servo. If your mounting envelope is tight, however, you might want to double-check to be sure. For me, I had to do a little sawing and filing to get it to fit. But I did it, and it works perfectly.
TERRY AMAN
2025-05-27 15:36:53
I don’t know if it’s strong enough or just a bad part but I installed on my Erevo and took it out twice and now it doesn’t work anymore
Crash
2025-05-17 14:55:11
Seems to be solid. Tested fine
Kori Liebregts
2025-04-24 14:47:38
Super strong works great
willy
2025-04-23 10:42:39
Smooth and torquey it will man handle my my 10th scale crawler when in tight spots if not careful not what u would expect for under 30 bucks gold ⭐
Mp
2025-04-19 14:52:14
It wouldn't stop littering trying to find center on the stock traxxas radio, upgraded to fs gt5 and now it's fine. Strong servo that has lasted longer than the first power HD one I bought that lasted 1 run.
Sun king
2025-01-31 15:55:16
It didn't feel like have 40kg power...
Recommended Products

$39.99

$ 18 .99 $18.99

4.5
Select Option