Shopping Cart

Your cart is empty.

Your cart is empty.

2PCS Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

1.Style:2pcs


About this item

  • ❃❃Dual color LED display: this digital thermostat control module of dual color LED display, which show the measured temperature (red) and set temperature (blue) at the same time, which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature
  • ❃❃Operating Voltage: DC12V 200mA
  • ❃❃Measurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperatures
  • ❃❃Waterproof design: the NTC (10K 0.5%) probe is waterproof, and you can control the temperature at will, can also control heating or cooling according to different needs
  • ❃❃Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.


Indicator:

Lights on, relay closed. Lights out, relay disconnected.

Specifications:

Operating voltage: DC 12V 200mA

Power consumption: ≤ 35 mA (static), ≤ 65 mA (relay close)

Temperature sensor type: 10K 0.5% NTC

Compatible load: 5A/ 15A 220VAC, 20A 14VDC

Measurement range: -50 to 110 Celsius (-58 to 230 F)

Elaboration precision: +/-0.1 Celsius

Control precision: 0.1 Celsius

Backlash precision: 0.1 Celsius

Refresh rate: 0.5 s

High temperature protection: 0 to 110 degrees Celsius (32 degrees Fahrenheit - 230 degrees Fahrenheit)

Module size: 48 x 29 x 32 mm/ 1.89 x 1.14 x 1.26 inch

Package includes:

2 x Temperature monitoring controllers


Bert
2025-08-18 10:20:12
I was looking for a thermostat to control cooling fans in a DIY power station. Took a little tinkering to work in my application. Works great, I will use again in the next power station I build.
William
2025-06-25 15:26:54
It's nice and work, but if you will try to understand the schematic in order to make this to work, good luck. The information It's not there at all you will need a little patience and be devoted to find info and make to work but after you will like this device.
randall mccombs
2025-03-30 10:27:25
These are working well with heat pads in my shop,no issues
J R
2025-02-15 11:18:37
Not even a simple wiring diagram or labels for the 4 connections was supplied.(can always connect wires randomly and hope you don't fry it or yourself)I have purchased this same item from others - so I could dig out the simple instruction sheet from a previous purchase off EBAY, If you don't have that luxury your out of luck with this seller.These controllers also have 8 internal setting that can be adjustedfor use in Heating/Cooling,Temp diff for triggered relay, high &low limits, temp corrections to calibrate ....Without the simple small but useful instruction sheet - you wont be able to use them
Jenny
2025-01-09 10:51:13
These work great in tandem with a cpu fan. However, there is a learning curve to setup. Also be very careful to not short them. They will fry quick.
Reece
2024-12-20 11:48:26
Both of the units I received are not functioning. I've tested them on 3 different variable voltage power supplies. And the capacitor shown in the photos of the advertisement is not there which is the main reason I purchased from this seller. I'm replacing them to see if they send ones with the capacitors.
David Wood
2024-12-03 15:49:21
TP-CM01D24Product Specification: Operating Voltage: DC12V 200mA Measurement Range: -50 to 110 Celsius (-58 to 230 F) Elaboration Precision: +/-0.1 Celsius Control Precision: 0.1 Celsius Backlash Precision: 0.1 Celsius Refresh Rate: 0.5s High Temperature Protection: 0 to 60 Celsius (32 to 230 F) Temperature Sensor Type: 10K 0.5% NTC Operating Temperature: -10 to 60 Celsius (14 to 140 F) Compatible Load: 5A / 15A 220VAC; 20A 14VDC Power Consumption: Less than and equal to 35mA (Static), Less than and equal to 65mA (relay closure) Module Size: 48x29x32mm / 1.89x1.14x1.26 inch (LxWxH)Temperautre Setting: Press STC key and the LED will flash. Press STC (+) and C/F (-) key to reach the set temperature value, wait for 3s, and the module will automatically save the parameters and exit. Indicator: Lights on, relay closed; Lights out, relay disconnected.LED Display: Red: Measuring Temperature; Blue: Setting Temperature LL: Means the sensor is open HH: Indicates that the temperature exceeds the measurement range of the module --: Indicates that the module is under high temperature protectionOperation Instruction: Programmable Thermostat Introductions (Code, Explain, Setting range, Factory setting): P0, Heating/Cooling, H/C, C P1, Return difference, 0.1-30, 2 P2, Set limit maximum, +110, 110 P3, Set limit minimun, -50, -50 P4, Temperature correction, -15 - +15, 0 P5, Delay start, 0-10, 0 P6, High temperature alarm, -50 - +110, OFF P7, Celsius/Fahrenheit, CS/FH, CS P8, Factory reset, ON-OFF, OFFProduct Dimension: Size: 48mm (length) * 29mm * wide Depth: 32mm / 1.89x1.14x1.26 inch Hole size: 46 * 26.5mm / 1.81x1.04 inch
James Christiani
2024-11-13 14:44:02
Longer probes available is great. The longer probes seam more accurate.
Recommended Products