Your cart is empty.
Your cart is empty. Features:
- To separate the mixed audio signal into a treble, alto, bass, and then were sent to the corresponding treble, alto,bass speaker unit in playback, resulting in enhance the sound purposes.
- Make the treble clear, enrich the alto effect, and increase the intensity of the bass, freely enjoy clear and natural music.
- Wire wound ceramic resistor and metal film capacitors, ensure its large load power, long-term durability, never burnout.
- Treble, alto and bass frequency dividing, widely used for 8-12inches speakers.
- Circuit board design with precise cut outs and lines, free for welding, very suitable for DIY. Specifications:
Product Name: Treble Alto Bass 3 Way Speaker Frequency Divider Board
Out Power: 350W
Voltage: 12V
Frequency Range (Hz): 40Hz - 22KHz
Impedance: 4 - 8Ω
Material Type: ABS + Metal
Place of Application: 8-12 Inches speakers
Crossover Point:
- Low/alto 900Hz (alto low)/850Hz (alto high) switch adjustable
- High pitched/alto pitched: 5600/5800Hz switch adjustable
Package Includes:
1 x Speaker Frequency Divider
Kindle Customer
2025-07-30 13:22:32
Sound quality was good and I like the 3db adjustment on the mods and highs.
Wayne
2025-07-16 12:29:11
-Low/High 900Hz (Low High)/850Hz (High) Adjustable Switch-High/High Pitch: 5600/5800Hz Adjustable Switch
David Blakley
2025-05-26 12:24:19
Running Crown amps and Yamaha amps, and they can handle the power very satisfied with them
Doug Brookshire
2025-05-17 13:05:12
Great crossover for the money
Michael
2025-05-02 17:42:39
The board works as advertised. It splits an audio signal and it is capable of handling higher voltages used in hi fi audio. This is not a guided DIY kit, even the datasheet is pretty rough compared to most. You will need to be, at the VERY least, familiar with audio circuits. The capacitors are large and can hold a bit of power for a while depending on the type, so this thing could be dangerous on or off if you do not know what you're doing.There are no digital or silicon parts included, or it at least looks that way. The circuit tracelines are wide "valley" trails between different modules, and only a small number of these were used for production. This should work great for rerouting the circuit or for interfacing other circuits for a DIY project.I would imagine a person that was capable of using this for DIY may have an easier time having a board printed and soldering their own crossover, but it is still a fun experiment piece. Make sure you have plenty of solder to fill the "river of solder" tracks that connect modules. (Or design your own solution)
Pen Name
2025-04-10 11:43:25
Career electrical engineer here. Had to reverse engineer circuit because no schematic nor crossover frequency/slope details available. Ended up having to circumvent midrange output because it was such a poor filter design.
Naha Karam
2025-04-02 16:03:00
Works as promised. Packaging was rough and so is board construction. I can't say how durable it will be but is working great so far.
WeeTwo
2025-03-05 12:22:16
So easy to install, 5 mins each speaker, yes you have solder the connections, but each xover went straight into each speaker and no problems. Sound is absolutely awesome! I set the switch to 3db as it gives a richer deeper bass line. More than very happy with these.
rejean piette
2025-02-24 17:22:46
Haut parleur
DragonGX
2025-02-13 15:44:05
El producto llegó a tiempo y en forma, solamente que llegó dañado de un plástico, venÃa roto dentro del paquete pero tiene solución, de ahà en fuera muy buena calidad.
Lukasz
2025-02-09 14:13:59
Great upgrade to an old speakers and look so good that I've decided to keep it on the outside of the speakers cabinet. Good value for money.
Paolo A.
2025-01-26 17:02:33
ben costruiti, per le sonorità basse vanno molto bene, difettano nei medi e leggermente anche alle frequenze alte, possibiltà di aumentare di 3db comunque, equalizzando si migliora molto,
Recommended Products
$26.86
$ 11 .99 $11.99