Your cart is empty.
Your cart is empty.The Clone King 36 Site Cloning Machine Utilizes An Aeroponic Cloning Method To Make Successful Cloning Quick And Easy. Plant Cuttings Are Suspended In Mid-Air Where They Are Sprayed Constantly By A Highly-Oxygenated Aeroponic Mist. Roots Will Start To Appear In As Little As 3-5 Days For Most Varieties. Aeroponic Cloning Provides A Cheap And Effective Way To Clone All Of Your Favorite Plant Varieties. The Clone King 36 Will Make You An Expert Cloner From Your Very First Cutting. With The Clone King 36 you get everything you need to start cloning immediately. We can not emphasize enough how easy this machine is to use. Anyone can be successful by following a few simple directions. Cloning your favorite plant is a snap. Even if you have absolutely no cloning experience at all you can have your Clone King 36 set up and running within 30 minutes. A 100% success rate is the norm when cloning with The Clone King 36. This is a time tested design that has had fantastic success with a multitude of plant species and varieties. Expect plants to root in half the time of a conventional system without the problem of wilting or the trouble of a humidity dome. The Clone King 36 creates explosive root development which will aid in all phases of your plants life producing greater vigor and yield. In as little as 3 days you will see tiny root bumps coming off of your cutting. In 5-7 days roots are formed and expanding rapidly. At the 10-14 day mark your newly rooted plants are ready to transplant into whatever growing medium you prefer. Your new clones will perform great in dirt, a hydroponic or aeroponic grow system as they move to the vegetative growth stage. The Clone King 36 can easily adjust to root anywhere from 1 to 25 cuttings. Do not be fooled by over priced cloning machines. This machine will work as well if not better than anything on the market at half of the price. The Clone King 36 is unmatched in its simplicity, quality and success rate.
jason karr
2025-08-19 13:43:41
Hands-down, the best clone machine in the business and at the best price! This thing is a total game changer and I have near 100% effectiveness when taking cuttings. As long as you take a good cutting, this thing will make it grow roots!
Clint E. Cat
2025-08-16 21:53:52
The cloner arrived in good condition and was easy to set up. I started tomato cuttings and several type of soft wood cuttings right away.The tomatoes started rooting within days and were very rooty after 1 week. I transplanted and 1/3 died and the others looked bad but are still hanging on. I will have to figure out how to avoid transplant shock better. However, while in the cloner, they looked fantastic!I got soft wood cuttings from six shrubs to see how the cloner would handle them. I picked different thicknesses and lengths. About half of the very skinniest (~1 mm thick) were the only ones that died. All the other cuttings lived. The ones that seemed to do the best were about 2 to 3 mm thick in diameter. One type of plant (I think it was mountain lavender) even started rooting after ~10 days! After 3 weeks, the cuttings were still alive and had green cambrium, buds and small leaves, although I couldn’t discern any callous. However, I didn’t see callous on the cuttings that clearly had roots so maybe callous formation is different when rooted aeroponically versus in soil.I did have to spray the cuttings with water for the first few days even though the seller said it wasn’t needed. To be fair, I was pretty brutal in cutting. I used kitchen scissors and not a razor, as was recommended. Even with my clunkiness, the cloner kept the plants alive.I’ve converted it to a aeroponic grower (it’s hard to get fresh veggies because of coronavirus lockdown) and am growing lettuce and strawberries under a grow light. They are doing great and getting big.The pump does warm up the water and it was getting too warm in the window. The temperature of the water measured at mid-day was 78.4F. I’ve moved to a cooler part of the house and am using a grow light and the plants seem to be doing better.I recommend this for anyone interested in cloning, because it works and is very easy to use.
Miranda Moles
2025-07-22 13:57:44
works good
MC
2025-06-08 12:43:24
The media could not be loaded.
Customer
2025-06-04 15:25:18
Let me just say this cloner so far is great. Very easy to put together. They even have the spray emitters already screwed onto the manifold. I’ve used similar brand name cloners for years in a professional setting and am very experienced with them. What I am the most happy about is that the sprayer is MUCH gentler than the cloners I’ve used prior, and because of this there’s less room for damaged stems and roots. Not only that but I’ve had experience with other cloners where the water overheats from the motor and causes bacteria growth. In the past I’ve had to change out ice packs twice a day to prevent this. So far I have had it running for several days straight and the water isn’t even warm ! My only complaint is that the foam pucks don’t slide into holes with ease, you really gotta squeeze/push them in which is very annoying when cloning/cleaning. Aside from that though this cloner seems to work better than the expensive brand name cloners out there. Definitely worth it for the price. Even if the pucks are slightly too big for their holes lol. I will come back and update the review if anything goes wrong after using it for prolonged period of time.
plecostemus442
2025-05-04 09:53:55
To be fair they say you don't need any ph adjustments or nutrients. I waited 2 weeks and had no results. I believe milage may vary depending on tap water quality. But! I did find the following method to be extremely effective.I put,10ml clonex10 ml hydrogen peroxide1ml each of advanced nutrients ph perfect - grow, micro, bloom per gallon and a rather large air stone attached to a 3.5 watt air pump and BLAM root city. Like roots for days.I very much like this product.I've left the clones in it for a few weeks now. I've topped the reservoir off twice using the same recipe above. I haven't checked ph, or ppm. just keep topping off. They keep growing. This method has been very effective compared to other methods ive tested.Filling this, use an empty 1 gallon water jug and fill just below the red nozzles. If I recall was about 3 gallons give or take. If you cover the red nozzles they won't be able to spray up onto the cuttings.
Jesus
2025-04-23 10:19:40
Simplemente genial, pones agua, cuidas que este entre 16 y 18 grados C y no hay que hacer nada mas!
jack
2025-03-30 20:51:48
My own fault I should've checked it properly but the pump Is 120v and it blew up and switched of my electric 😄
Moe
2025-03-23 13:56:20
Item arrived, put it together (very easy). Pump wouldn't work. Contacted seller. Immediately sent out a replacement. Received it everything works . Within 7 days had roots on 35 of the 36 cuttings. & days into second batch and have 34 of 36 with roots. :)
Daniel Sanchez
2025-03-15 09:42:03
Pesima compra, muy caro y dejo de funcionar a los 3 dias
Le McG
2024-12-16 14:06:51
This unit has worked wonders for me. I have had no success with cloning in soil so I bought this because it has been sold for quite a while and has had some solid reviews as far as it’s functionality. I don’t share any complaints with the last couple reviews, the components were built professionally. I used tap water which sat for 24 hours. I lowered the PH below 6.5, then ran the machine for 2 days to aerate the water. Cut the clones on a 45 like the instructions say, put them in and left them with 2 fluorescents on them 18/6. I have done one batch so far and it took 7 days to see nubs or roots but after 14 days they have exploded...all of them... 100%. I can now stabilize my genetics :) Thanks The one thing that should be mentioned is that you should keep the water cool below 75F. I live in Canada but the ambient air of my veg room is 26C all year, so I ordered all the components to make a water chiller/Peltier cooler and while I was waiting I pointed my cold air intake at the clone king tub and put the thermostat probe in the water to turn the fan on. This worked perfectly fine for the meantime.I made the Peltier Cooler, and it brought the temperature of the water down to 65-67... very cool!! This cloning machine works exactly as they have said and as the pros in Colorado are using it, it’s pretty much the industry standard and I totally see why. No worrying about anything. I added nutrients and lowered the PH below 6.5 again after 12 days.Total cost of Water chiller: $140Components from Amazon:1. 12V Energy-Saving Thermoelectric Peltier Cooler Semiconductor Refrigeration Water Chiller $692. Inkbird Temperature Controller ITC-1000 110V $233. Padarsey 110/220V to DC12V 10A 120W Switch Power Supply Driver Power Transformer $204. VicTsing 80 GPH (300L/H) Water Pump Submersible Pump $145. Vinyl Tubing - 10 feet 5/16 ID - 7/16 OD (Food Grade) $15I used a couple old 120V computer powered cables to wire the components together and mounted it all to a piece of wood which took about an hour.I would definitely buy this again
Recommended Products
