Your cart is empty.
Your cart is empty.Product Description
S08K-SDUCR07
- Overall length: 125mm/4.9"
- Shank diameter: 8mm/0.31"
- Cutting angle: 95°
- Dmin.(minimum boring aperture: Φ12/12mm
- Insert applied : DCMT 2（1.5）
- Screw : M2.5*6
- Wrench : T8
S10K-SDUCR07
- Overall length: 125mm/4.9"
- Shank diameter: 10mm/0.39"
- Cutting angle: 95°
- Dmin.(minimum boring aperture: Φ15/15mm
- Insert applied : DCMT 2（1.5）
- Screw : M2.5*6
- Wrench : T8
S12M-SDUCR07
- Overall length: 150mm/5.9"
- Shank diameter: 12mm/0.47"
- Cutting angle: 95°
- Dmin.(minimum boring aperture: Φ17/17mm
- Insert applied : DCMT 2（1.5）
- Screw : M2.5*6
- Wrench : T8
About Carbide Inserts
- INSERT USED : 10pcs DCMT 2(1.5) Gold
- APPLICATION : For Steel And Stainless Iron
- SCREW: M2.5*6
- WRENCH : T8
Specification
- Lead Cutting Angle: 95 Degree
- Direction: Right Hand
- Comes with individual package, packed in Plastic box with Size mark,easy to identify
Widely Use
- High grip strength, impact resistance,strong and clear speed advantage in cutting off a large margin and processing,
- Great for fine finishing and semi-finishing.
- Can use in various processing occasion,even in dirty environments, such as cast iron foundry
Carbide Insert - DCMT070204 / DCMT21.51
- Material: made of solid carbide with tin coated.
- Used for machining stainless steel and steel parts.
Smoothing Cutting
- Sharp and durable,
- Smoothing cutting ,
- Reliable chip breaking,
- Smooth chip evacuation.
Good Wear Resistance
- 55° Diamond Turning Inserts.
- 9/32" Cutting length, 3/32" Thick, 0.4 Radius.
- Positive angle: 7°
- Screw； M2.5*6
- Wrench； T7/T8
S_Clay
2025-05-24 12:29:17
Keep in mind, these are not carbide boring bars so they do deflect a lot while machining. That being said I was able to make some very aggressive cuts and come within .005" consistently. Worked very well for boring and internal facing. I even used them to back cut a few times on my project but performance was poor (as one might expect). Overall worked well on manual lathe, I would not recommend using these on a CNC.
Cecil Sawyer
2025-02-05 15:40:32
Very Satisfied
Recommended Products