Your cart is empty.
Your cart is empty.Product Description
How to use FSJEE LED Connectors?
Gapless connector
L shape
T shape
Package Includes:
- 1 x 2way 4pin splitter
- 1 x 6.6FT RGB extension cable
- 2 x T Shape Connectors
- 5x LED strip jumper connectors
- 5x LED strip to controller jumper connectorss
- 10 x Gapless LED strip Connectors
- 10 x L Shape Connectors
- 20 x male plugs
- 20 x LED strip light mounting clips
Jerome Carpenter
2025-07-31 17:58:07
I used this kit to wire up different sections of an LED light strip for under the cabinet lighting. The components were easy to use/set up and have been reliable.
Richard
2025-07-19 18:33:34
Only issue is sometimes not a good connection after installing
Eduardo Andres Gutierrez Barriga
2025-06-28 12:34:34
Buena calidad, muy completa las partes incluidas. no me sirvió para reparar tira de luces de TP-Link
mikie
2025-05-07 11:29:29
There was more parts than I Needed for my project, which turned out great.
Coop
2025-04-16 16:28:49
Assembled all the lighting in hard to reach places using this kit. The lights did not turn on to start. Played with the crimp style connectors to ensure all the leads on the strip lights were lined up with the pins correctly. Finally got the lights on to blue. Went to stick the crimp back on the wall and the connection once again disengaged with a feathers touch. Okayyy…. Attempted to tape the connectors to the board- Didnt work. Attempted to electrical tape the entire connection to ensure the crimp was held on tight- Disengaged when I went to put the strip back to the wall. Finally got the connection made and back to the wall after working on one connection for 30 mins. Turned the lights on and attempted to change the colors- No Dice. The only colors that work are blue and green except for the main strip that is before any of these connectors and is connected directly to the power supply. So obviously the three crimp connectors from the kit were the issue.so now, if I want these lights to work properly I need to pull out all the connectors from this kit and solder everything which is what I was trying to avoid in the first place. If youre making something like this to make people’s lives easier (avoiding soldering) you missed the mark by a mile. Make them better with a tight, fail-proof grip on the lights leads. I now have to pull all lights off (ruining their adhesive) to solder this on a table and reinstall them all. Do better
Jesse K.
2025-03-15 21:29:21
If you breathe on this the wrong way, you will lose a connection. The only way to make these stays if you solder which defeats the purpose of purchasing this
george bennette
2025-02-20 13:49:03
Arrived quickly and better quality than ones I've ordered in the past from elsewhere. If you have ever dealt with these connectirs before then you know how much trouble poor quality can cause. I recommend these over any others I've tried before
t
2025-01-07 14:18:50
Large selection of parts and even if you don't use 1/2, its still a better value than other LED adapter packages. Only issue I have is the T adapter reverses 4 leads on one side so you need to flip the LED strip upside down for it to work right OR what I did was use some of the extra pieces to flip LED leads. Overall satisfied and I'd buy again.
Recommended Products