Your cart is empty.
Your cart is empty.
This mic adapter screw 5/8" female to 1/4" male screw to microphone stand is precision made for mounting cameras, lcd monitor, recorders and other accessories onto a microphone stand.
Fetures: Solid and durable. Smooth Threads. Easy to add on and remove.
Material: Aluminum alloy.
Package Includes:
2 x mic screw adapter 1/4"-20 male to 5/8"-27 female.
Matthew Shepherd
2025-08-12 18:51:28
Goes right onto my mic boom arm and into my yeti, works as described.
Joey G. Manchego
2025-08-03 17:15:55
Exactly as described, measurements are correct, works for what I need.
Trevor
2025-07-19 11:03:30
Needed it to attach my blue yeti microphone to an older mic arm. Does its job and is holding up nicely.
Bruce
2025-07-16 11:22:51
Good quality. No burrs, screws in smoothly. Fits K&M products perfectly.
Birck
2025-04-01 15:27:54
I guessed at the sizes, but this adapter worked fine. I was trying to mount a Samson Go-Mic on a standard chrome 5/8" pillar, and the threads matched perfectly. I was able to accomplish the task with one minor problem: the 3/8" threads on the adapter end about 1/8"-3/16" before the top of the 5/8" section, meaning that the thin plate of the Go-Mic threads on, but is loose and floppy when it reaches the bottom of the 3/8" pillar. The user will need to find or make a 1/8"-3/16" washer to thread onto (or slide onto) the pillar for the Go-Mic to seize onto to prevent it flopping around loose. Not a dealbreaker.
philip b.
2025-03-02 15:38:43
It does what it describes.
Anonymous
2025-02-25 14:55:12
I have the Toner boom arm that was supposed to be compatible with Blue Yeti. Unfortunately it doesn’t work with the Blue Yeti Nano. This little adapter came in handy and was the solution to my problem. Quality seems fine.
Gerald
2025-02-15 11:41:45
Thank you
Mick
2025-02-08 16:33:25
The plastic nut that comes with the Blue Yeti strips out, and this is what you need to replace it.
Georgieboy
2024-12-06 20:31:35
The product worked as intended :)I use a Rode PS1A Studio Boom Arm, Blue Yeti Mic and and a Blue Yeti Shock Mount.An issue I use to have with the Boom Arm and Shock Mount was that the thread that feeds into the Shock Mount from the Boom Arm was both too short and too thin. The shock mount I have has two sized threads. One wider one at the opening of the socket that connects to the Boom Arm and a more narrower one deeper into the socket.Initially when feeding the Boom Arm thread into the Shock Mount socket, the Shock Mount would wobble and wouldn't sit properly. After installing the Mic Shock Mount Screw Thread Adapter, I no longer have that issue!The adapter converts the wider thread on the shock mount into one that fits the Boom Arm. Doing this means that the Boom Arm can tightly screw into Shock Mount Via the Thread Adapter!Totally recommend it to anyone who has a similar issue!
Recommended Products
$29.95
$ 12 .99 $12.99