Your cart is empty.
Your cart is empty.Product Description
Cindy Tavares
2025-09-03 15:14:46
Works perfectly as it should going to many years out of these
Rob H.
2025-08-22 17:57:31
The media could not be loaded.
T. D. Becker
2025-08-20 17:56:54
Installed in each corner of utility trailer for tie down of golf cart. Drilled 1/2" hole in steel frame. Used 1/2" x 1.5" grade 5 stainless steel bolts. Very secure, very safe, low profile, loop still has some movement which is good, very pleased with this product for this application.
william locklear
2025-08-10 15:28:58
I used mine to construct tie-down points on my Kubota MX 5400 tractor.
Ashley T.
2025-07-31 11:28:10
Held up a fully dressed 6.7 powerstroke with ease!!
texasfireparamedic
2025-07-23 15:18:30
The overall build looks to strong. The plate is 10 mm plate or just above 3/8". The link is 12 mm or just below 1/2". The link is welded. The bolt hole can fit a 1/2" bolt but nothing more.The only thing I can take exception to is that the plate is bent in a U shape. There is no actual flat that the bolt can torque against. The area that the bolt head is not large enough for a washer to sit flush nor could it due to the shape.In the end if you buy I would use a hardened bold at least a grade 5 or 10.9 metric. But best of all use your best judgment.Thanks for reading.
Fred Bloggs
2025-06-21 14:33:19
I was surprised when I opened this package. I did not expect these clamps to be so strongly made. Sure, they claim to be able to lift 5,500 pounds each but there a lot of very exaggerated claims on Amazon. When you look at the pictures you think to yourself, okay, they really mean 5,500 pounds total weight between all 4 brackets. When I opened the package and saw them, that is when I realized they were not boasting, these puppies will do what they say. Anyway, I was lifting one of the heaviest pickup engines ever made, a Cummins 5.9 out of my Dually. It is a 6 cylinder cast iron block weighing almost as much as a Mini Cooper. (Alright, now I’m guilty of exaggerating, but you get the point) It is a very heavy engine. I managed to find four points with 12mm bolts (a tiny bit smaller than ½†bolts) hook them up and lift. It was a great help that the base plates are angled so that the chain loops do not bind. I scuffed the pretty red paint a little but that’s okay. It popped the engine right out. That’s a lie. It took 30 minutes of wiggling the engine out of the engine bay. It is a very long engine unlike a V8. I never once felt like the brackets were not up to the job.The brackets are very well made and the sturdiest ones I have ever used.I highly recommend these brackets!
Rick
2025-05-13 10:54:06
Ordered this Pack of (4) 7100 Lifting Bracket Set for Engine - Heavy-Duty Engine Lift - 5500 Lb Capacity to use in my repair shop. Great addition to my tool collection and use. I'm always working on one of my pieces of equipment ( two trenching machines, tractors, & mowers ) and often can use these for my applications. These make a great strong lifting tool to lift and pull on engines, transmissions, and (4) & (6) ft trenching bars and hydraulic motors as it's all heavy steel and several pieces weigh from 500 Lbs to well over 2,000 Lbs. Having these (4) lifting brackets will make my life easier as I'm usually working alone and no help. Most of the heavy weight items has from 3/8" G8 to 1/2" G8 bolts and these are perfect size for my use. I like the very thick steel brackets and the curve in them. Makes lifting/pulling lots easier.These are made of heavy grade galvanized steel and have a nice red and smooth powder coat finish.Will certainly last me a lifetime. I recommend these lifting brackets. Happy with order
Cindy Tavares
2025-04-22 14:02:38
Works perfectly as it should going to many years out of these
Rob H.
2025-04-21 15:57:33
The media could not be loaded.
T. D. Becker
2025-03-08 13:15:58
Installed in each corner of utility trailer for tie down of golf cart. Drilled 1/2" hole in steel frame. Used 1/2" x 1.5" grade 5 stainless steel bolts. Very secure, very safe, low profile, loop still has some movement which is good, very pleased with this product for this application.
william locklear
2025-02-10 12:37:52
I used mine to construct tie-down points on my Kubota MX 5400 tractor.
Ashley T.
2025-01-19 15:37:05
Held up a fully dressed 6.7 powerstroke with ease!!
texasfireparamedic
2025-01-02 12:08:30
The overall build looks to strong. The plate is 10 mm plate or just above 3/8". The link is 12 mm or just below 1/2". The link is welded. The bolt hole can fit a 1/2" bolt but nothing more.The only thing I can take exception to is that the plate is bent in a U shape. There is no actual flat that the bolt can torque against. The area that the bolt head is not large enough for a washer to sit flush nor could it due to the shape.In the end if you buy I would use a hardened bold at least a grade 5 or 10.9 metric. But best of all use your best judgment.Thanks for reading.
Fred Bloggs
2024-11-26 10:27:03
I was surprised when I opened this package. I did not expect these clamps to be so strongly made. Sure, they claim to be able to lift 5,500 pounds each but there a lot of very exaggerated claims on Amazon. When you look at the pictures you think to yourself, okay, they really mean 5,500 pounds total weight between all 4 brackets. When I opened the package and saw them, that is when I realized they were not boasting, these puppies will do what they say. Anyway, I was lifting one of the heaviest pickup engines ever made, a Cummins 5.9 out of my Dually. It is a 6 cylinder cast iron block weighing almost as much as a Mini Cooper. (Alright, now I’m guilty of exaggerating, but you get the point) It is a very heavy engine. I managed to find four points with 12mm bolts (a tiny bit smaller than ½†bolts) hook them up and lift. It was a great help that the base plates are angled so that the chain loops do not bind. I scuffed the pretty red paint a little but that’s okay. It popped the engine right out. That’s a lie. It took 30 minutes of wiggling the engine out of the engine bay. It is a very long engine unlike a V8. I never once felt like the brackets were not up to the job.The brackets are very well made and the sturdiest ones I have ever used.I highly recommend these brackets!
Rick
2024-11-20 16:18:27
Ordered this Pack of (4) 7100 Lifting Bracket Set for Engine - Heavy-Duty Engine Lift - 5500 Lb Capacity to use in my repair shop. Great addition to my tool collection and use. I'm always working on one of my pieces of equipment ( two trenching machines, tractors, & mowers ) and often can use these for my applications. These make a great strong lifting tool to lift and pull on engines, transmissions, and (4) & (6) ft trenching bars and hydraulic motors as it's all heavy steel and several pieces weigh from 500 Lbs to well over 2,000 Lbs. Having these (4) lifting brackets will make my life easier as I'm usually working alone and no help. Most of the heavy weight items has from 3/8" G8 to 1/2" G8 bolts and these are perfect size for my use. I like the very thick steel brackets and the curve in them. Makes lifting/pulling lots easier.These are made of heavy grade galvanized steel and have a nice red and smooth powder coat finish.Will certainly last me a lifetime. I recommend these lifting brackets. Happy with order
Recommended Products