Your cart is empty.
Your cart is empty.Product Description
High Quality and Multifunctional Right Angle Clamp
90 Degree Right Angle Clamp, Set of 4 Multi Angle Clamp, suitable for woodworking, cabinet and furniture repair connection, photo frame reinforcement, wooden DIY project, etc.
Fit boards with a thickness of 3/16" - 3/4"
For corner and T-joints, even with different board thickness.
Mounting aid device for screwing or gluing the boards together.
Fast and simple fixing of boards , frames at an angle of 90 degrees.
Single Handle 90° corner clamp and Strong enough but not too tigh.design fits naturally in your hand for comfortable control.
Specifications:
Item Type: Right Angle Locator
Clamping range: 3/4 inch/22cm, 3/16 inch/5cm
Total length: 80mm / 3.14in
Maximum width: 84mm / 3.34in
Material: ABS+Strong Spring Steel
Package list:4 * Right Angle Clamp
Package weight:4pcs: 323g / 11.4ounce
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
Melissa
2025-08-02 16:49:43
I recently updated my mom's pantry to add multiple level storage for her cans and spices and these clamps are a lifesaver. The quality is really good and they adjust to the width of the boards you are using to connect. I was using 1/2" on this project. They are spring resistant so you due have to pull them up and adjust them to the boards but once you understand how they work they are easy. Put down some wood glue and clamp, follow up with some nails and your project is done. I completed her top right side without the clamps and it took an entire day, I completed the left side and the entire shelf below in half that time when using the clamps. The right tools make your project much easier.
Cortevans
2025-07-28 15:49:45
I haven't used them , but I did play with them. They work good like they should. They seem well made but they are only sturdy for the size wood they list. There are different sizes, I bought the small unit.
Rick Horwath
2025-07-14 18:13:54
I'm making a small box to hold music artists complete track booklets. I have other corner clamps, but they were too big for use with the small project. Well, these work quite well! They are a little tricky to get used to because they are so small, and it takes a few tries to get them in the right position, but one you get over the familiarization, they click right into place. They hold well enough to get the glue in place and continue to hold while it dries enough to take them off. You'll need to add some glue where the clamps cover the joint, but no big deal, just adds a little time for the glue to dry. Was a skeptic, now a believer! Worth the money!
Nicholas
2025-07-09 09:51:09
Fast corner holders which get the job done and inexpensive so why not add this to your cabinet. If you don't have a cabinet you'll be able to build one with these. The nice thing about them too is they are small so they fit in between tighter corners more easily. Don't know why I waited so long to pull the trigger and make the purchase.
Paola
2025-06-21 20:15:20
They're a little janky and dont hold as evenly as I'd hoped.
DIYer!
2025-06-17 15:10:22
I was working on a fireplace mantle and needed a “second†pair of hands to secure my boards so I could nail it together. I purchased these and they worked like a charm. I was able to easily attach both boards by myself and get it done. It adjusts to different widths making it very versatile.I did have some trouble opening the clamps because I lack some grip strength but that shows how strong these clamps are. I can see many uses in the future. A great purchase.
My Opinion
2025-06-04 13:07:22
These are easy to use but the spring is not very strong, and it cannot be as it needs to be soft enough to squeeze by hand.I tried to use them for a larger size picture frame and not sure if they helped or made the alignment more difficult as each corner moved quiet easily after I applied these clamps.They are not expensive compare to other corner clamps may work for lighter projects. There are no defects in the design or manufacturing. just not as universal as you may think.
Lexi
2025-06-03 17:31:39
These are awesome, yes as clamps for gluing parts but also simply as a 2nd pair of hands to hold things up or together while test assembling what you are making. I may buy another set!
José Luis Barragán Estévez
2025-03-20 16:40:54
Excelente producto, MUY RECOMENDADO, saludos...
Texasflood
2025-03-18 11:18:16
These work well for my projects.
Emad Alshmas
2025-03-05 11:59:41
صغيرة الØجم صناعتها مقبولة
Snuggled up
2025-02-27 16:09:02
I gave them as a gift for Mr Gadget and he likes tgem
Jose Luis Hernandez
2025-02-16 16:59:07
Material de baja calidad. Muy frágil y poco rÃgido. Hay que tener cuidado para que ajusten bien las uniones
Recommended Products