Your cart is empty.
Your cart is empty.Product Description
Replaces MTD 951-10974 951-10974A 951-12705
Center to center mounting hole distance: 40.97mm/1.61''
Central bore diameter: 19mm/0.74''
Replaces Huayi 165S 165SA
Replaces Stens 520-862
Replaces Cub Cadet 165-SUB 265-SU 365-SUB
Replaces Troy Bilt 31AM62N2711 (600 series) and 31AM2N1B795 (2008)
Center to Center Mounting Hole Distance: 40.97mm/1.61''
Primer Port Nozzle O.D.: 5mm/0.2''
Fuel Inlet Nozzle O.D.: 9mm/0.35''
Replaces MTD 31A-32AD700 31A-32AD706 31A-32AD729 31A-32AD752 31A-32AD762 31A-62EE729 31AH62EE000 31AM2N1B301 31AM2N1B304 31AM2N1B307 31AM2N1B371 31AM2N1B372 31AM2N1B382 31AM2N1B401 31AM2N1B513 31AM2N1B700 31AM2N1B704 31AM2N1B706 31AM2N1B709 31AM2N1B713 31AM2N1B720 31AM2N1B729 31AM2N1B730 31AM2P5B704 31AM62EE700 31AM62EE706 31AM62EE731 31AM62EE752 31AM62EE799 31AM62KE704 31BM62EE799 31BM62KE704
Center to Center Mounting Hole Distance: 40.97mm/1.61'' Central Bore Diameter: 19mm/0.74''
OJG
2025-09-01 16:38:31
It was one of the easiest to install and worked on the first pull. Outstanding quality.
Patrick
2025-08-29 11:12:33
Arrived, took about 30 minutes to install. The snowblower fired up on second pull.
Keith D.
2025-08-20 17:56:32
This Carburetor was a perfect match for my old one. I like that it included a fuel shut off valve and a fuel filter. This Carburetor was for a troy built 2620 snow blower. The new Carburetor runs fine, did not require any adjustments. For less than $20 bucks you can have a new carb, why mess around cleaning the old one.
Doug Hudson
2025-08-04 15:26:14
Fit snow blower perfectly. Ran like new after I put it on
Jeany1988
2025-07-22 11:04:16
The carb worked fine but if you’re planning to replace the fuel hose, it is not the black/rubber one displayed. I don’t mess around with fuel lines, so had to make a trip to store which defeats the purpose of ordering from Amazon.
Customer
2025-07-11 12:11:13
Fits and works like original. Looks like good quality material. Comes with primer bulb and tube ( which I needed as old tube was torn). Couple issues: one gasket did not fit out of the three included. The last one to be installed, had to use old gasket.The fuel hose was clear rubber with no markings on it saying for fuel use. I had to use the old hose which I didn’t want to do on a 11 yr old snowblower. After installing this carb the snowblower fired right up with electric start and one pull with cord. Good deal for the money even considering the 2 issues.
Dan Kunze
2025-06-07 17:07:26
With the exception of one gasket that wasn't correct (out of the three shipped) everything was perfect and my snowblower started immediately after installation. Great value for the cost.
Michael W. North
2025-05-15 13:52:39
This kit has everything you need to change carbs on your snowblower. Quality product. Recommended!
Marmon
2025-03-17 13:55:52
It is working well
Tony
2025-01-31 16:28:49
Complete, install was as expected. Needs some mechanical knowledge, happy with purchase
LZSZ
2025-01-14 19:09:05
Snow blower
Mahmud
2024-12-10 11:10:17
In my case just replace the carburetor and used new casket
Recommended Products