Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 12'' 4 Combination Square Ruler Set Protractor , 4-R Graduation, 0000-8101
The combination square set comes with a stainless steel ruler, a square head, a protractor head, and a center head. They are made of premium steel which enables longer tool life and more reliability.
- Used layout, height, depth, angle set-up, etc.
- All heads are made of cast steel with better surface and hardness.
- Blades are fully hardened and tempered.
- Squarehead has level & scriber points.
- Micro-fine blade graduations.
- Easy-to-read satin chrome finished blade.
- 4R graduation: 8ths, 16ths, 32nds, & 64ths.
Replacement Ruler --- sold separately on Amazon.com:
- 12'' 4R ---> Item#/sku# EG02-0340
Stainless Steel Blade
- 4R Graduation:: 8ths, 16ths, 32nds, & 64ths
- 12" Blade
Use Square Anvil
The square head has a bubble and a scribing tool. All corners of the ruler are right angles. With the square head and the ruler, you may do:
- Strike 45° and 90°
- Verify 45° and 90°
- Use it as a level
- Set the height of table saws, gauges, etc.
- Mark by the the scriber when pencils or pens are unavailable.
Center Anvil
Find the center of circles with the center head and the ruler of the combination square set
Create or verify any angles with the protractor anvil and the ruler of the combination square set.
john d'orazio
2025-09-02 12:26:20
High quality set. Extremely accurate and well made.
Michel Hall
2025-08-07 11:27:32
High end is for old timers. This set does the job and have had no complaints from staff. Metal fabrication is what we do. Durable.
Robert N.
2025-06-16 10:17:30
Nice case, great combination of components
David Fuller
2025-05-29 13:32:09
Let's start with the good: I was able to get the ruler into the center finder. The locking tab made it a bit challenging to inser the ruler, but once it was in and locked down, it felt solid enough. Unfortunately this was the only usable combo in the set.Now on to the bad. First up, the most basic piece in the set: the ruler. You'd think it would be a no-brainer to make a decent ruler with smooth straight edges, but here, at least in set I received, the edges were quite rough and sharp. One of edges had a small raised jagged ridge about an inch from one end, and it was sharp enough to snag and slice a shop towel.Next, the square. It was really tough getting the ruler into the square because of the shape of the locking tab. The tab stuck out so far that it made ruler a really tight fit. Eventually I got it in, but I had to wrap the ruler in a towel to keep from slicing my hands on the sharp edges. When I locked it down there was excessive side-to-side play in the ruler, because the slot for the ruler is much wider than the thickness of the ruler itself.Finally, the protractor. I never could get the ruler to fit in this one. I tried it one way, flipped the ruler around, still no go. The locking tab and pin were too thick. I even rotated the pin so the tab was on the other side of the ruler slot, but still not enough clearance for the ruler.Anyway, quality is unacceptable for what is allegedly a measuring tool. I just feel bad for the delivery guy who dropped this off at 9PM! Little did he know that barely half an hour later it would be packed up again with a return label.
Atreides Modi
2025-05-17 13:45:39
I probably spent more than the average person searching for a combination square to replace my lost one i've had for decades... Wanted a combo metric/imperial, something well made, and a sweet spot price. This was it.Was concerned about folks complaining about the latch mechanism on slide. Mine look well machined and functional. As with my old ones, need to align it properly before inserting the rule. Only complaint was the amount of oil I had to clean off when removing from bags. Meh, guess a necessary evil for rust prevention in storage / shipping.Would recommend for typical machining / woodworking. Got the 12in/300mm, going to search for additional rule lengths now...
Clay R Burton
2025-05-13 11:45:33
Phenomenal quality at such a good price.The case has hinges and foam that has cutouts for every piece of the kit. The case has front snap catches for closing the case and securing it. I wish it would have some kind of sliding lock to be more secure.Each piece of the kit comes in a plastic bag and each piece except for the rule comes with an oil coating to prevent rust.My son brought tools home from work to check the accuracy of all the components of this kit. He was floored to see every setup of the combination square was dead on accurate. He was amazed at the low price I paid for such a quality tool. Now I can throw away all my cheap combination squares. This was definitely money well spent.
Michael C Wen
2025-04-29 17:35:26
Heavy duty and well made
Valuation
2025-04-26 14:52:01
It works for something cheap
Robert K.
2025-04-20 11:50:03
Have not used it much yet, but so far very happy. I like the fact that it came with a good case. To keep things together.
Benito Aladro
2025-04-16 14:08:37
Excelente juego de escuadras, resistente y bien empacado, quizás lo único que cambiarÃa es la aleación a Acero Inoxidable de alto grado.
Brent
2025-03-27 16:08:08
Finding centers on bolts and pipes
Customer
2025-02-09 09:08:44
They are good for the price.
Customer
2025-01-14 11:31:36
Very well made accurate!
Recommended Products
$20.76
$ 10 .99 $10.99