Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 1'' Diameter Countersink, H.S.S. Countersink for all Magnetic drills with 3/4'' Weldon Shank
- For countersinking, chamfering, and deburring work using the magnetic drill presses.
- Standard ¾” (19.05mm) Weldon shank for use in all standard magnetic drills.
- 45 Per Side, 90-Deg Included Angle Countersink 3/4 Weldon Shank For Mag Drills.
- 41 Per Side, 82-Deg Included Angle Countersink 3/4 Weldon Shank For Mag Drills.
- Countersinks of this type have higher efficiency while deburring and chamfering openings to pre-drilled holes. They come with standard ¾” ( 19.05mm ) Weldon shanks which suitable for all magnetic drill press with the same shank.
- It also works on the relevant attachment of drill presses.
- Made of industrial quality High-speed steel for professional performance.
Features
- Working with most of the magnetic drilling machines that accept 3/4" Weldon shank tool bits.
- For countersinking, chamfering, deburring works.
High-Speed Steel.
- High-speed steel (HSS) is with good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.
Specifications
Dimkoffg
2025-08-25 11:49:34
Countersunk 566 3/4" holes in mild steel. Last one cut as smoothly and effortlessly as the first.
Big fella
2025-08-07 10:04:30
I did 150 full depth countersinks and the last was as easy as the first, slugger powered it with ease with minimal cutting fluid
funbear
2025-07-31 12:38:38
I am using this in wood to get a nice counter sink for tons of screws.it has worked flawlessly so far... stays sharp after 100 holes in Maple.well machined, angle is spot on...great value ....
richard a starks
2025-06-29 15:23:48
Shank is too big for the chuck. Can’t use it
Jeff L
2025-06-26 12:49:01
it worked very well and sharp, mounted on Mag drill with minimal vibration and cut quality is very good and smooth too, highly recommended.
James Walker
2025-06-18 13:34:21
No dislikes and the quality is great . And a descent price.
Customer
2025-05-11 13:19:27
I turned shank down to 1/2 so it would fit into cordless drill for deburing holes
Krm
2025-04-22 11:26:20
Cuts well if you have a Chuck that's big enough to accept it!
WS
2025-03-01 16:17:54
Dulled easly
price
2025-01-10 18:50:29
It's a hefty, solid countersink with good clean edges, but Accusize needs to work on their product descriptions if they want more traffic.What's the angle or ratio of this countersink? This is crucial information. What machine is it compatible with? The description says "Rota-Cutter" but that's not a brand name I'm familiar with. Did they mean Rotacut? What is the main purpose of this countersink? (besides the obvious) It it for screws, lathes, rivets...?More information is needed to convince people to buy this one, instead of sticking to their McMaster-Carr orders.Comes in a protective dense plastic case, with nothing else.
Recommended Products