Your cart is empty.
Your cart is empty.Product Description
-
BXA
250-201XL Turning & Facing Quick Change Toolholder; working with BXA Quick Change Tool Posts; clamping 1/4"-3/4" lathe tool bits.
-
USA Style
For USA Style BXA Quick Change Tool Post
-
BXA Quick Change Tool Holder
The 0250-0201T holder should be mounted on a BXA quick change tool post. The codes for the tool posts include 0250-0200, 0250-0222, 0252-222. It means the third last digit of the QCTP must be "2"
-
-
Note
The BXA 0250-0201T do not fit these Quick Change Tool Posts: 0250-0000, 0250-0111, 0250-0100, 0250-0300, 0250-0333, 0252-0333, 0250-0400, 0250-0444, 0250-0555, and 0250-0500.
Accusize 0250-0201T Turning and Facing Quick Change Toolholder, working with USA Style BXA Quick Change Tool Posts, clamping from 1/4" to 3/4" shank lathe tool bits.
Identify BXA Quick Change Tool Post
For 0250-0201T BXA Turning and Facing Holder
To ensure compatibility with the BXA 0250-0201T Quick Change Tool Holder, verify that the code on your tool post has a '2' as the third last digit (e.g., 0250-0200, 250-200, 0250-0222, 250-222, 0252-0222, 252-222). This indicates it is an BXA quick change tool post.
-
Common QCTP
for 0250-0201T BXA Quick Change Toolholder
These Quick Change Tool Posts work: 0250-0222, 0250-0200, 0252-0222, etc.
-
Common Lathe Machines
for BXA Quick Change Tool Posts
The table lists the common lathe brands and models that can hold the BXA quick Change Tool Posts.
-
Comon BXA Toolholders
Choose BXA 0250-0201T if you own the tool holders
0250-0201, 0250-0202, 0250-0202T, 0250-0204, 0250-0205, 0250-0207, 0250-0241, 0250-0210, etc.
chuckbeck
2025-08-31 18:21:36
I couldn't make these for the cost of materials and they're perfect.
F. Varndell
2025-07-24 16:23:48
I wanted to see if I could mount 3/4 inch tools in my AXA holder. The answer was; not right out of the box. But an added shim to the stationary side of the dovetail on the AXA holder and it locks in tightly. So far not a problem.
FX Rigger
2025-06-23 14:12:25
A repeat customer of Accusize tooling. they are as described and quickly delivered at a reasonable price. Are they as good as top of the line stuff ? NO. are they plenty good enough to hold tolerances on my equipment to a couple of tenths (.0002 )YES. I will get more.
Chris De
2025-05-25 15:43:29
I ordered these in the BX/250 size. I must say, I was very surprised. Of the various tool holder brands that I own (Grizzly & Phase II), these have the absolute best Finish! The machining is great, minimal tool marks, edge bevels are even, and the surface grinding on the backside is the Best that I've seen (Mirror Finish). At half the price of the others, I'll definitely order more of these as i need them.
Joe T.
2025-05-07 17:26:39
Fits my Grizzly QCTP holder just fine
Badrat
2025-04-30 13:24:42
I bought 4 of these 250-201 and 250-201XL and they were machined very well, I then ordered 6 more 250-201 tool holders. These fit my tool post well and hold the tool tight. Intend on buying more in the near future.
Brian Meyette
2025-04-13 17:45:25
It's OK. It's the same basic part as the 201/202 holders, except this one will take 3/4" shank tools. rather than the max 5/8" shank max for the 250-201/202. I was hoping they'd made this XL from a piece of steel that was 1/8" taller, but all they did was mill out an extra 1/8" from the top and back of the slot for the tool bit, so you've got 1/8" less threads for the setscrews and 1/8" thinner steel web behind the dovetail . Other than that, it's exactly the same as the 250-201, except a bit weaker from cutting away more metal, and it will take 3/4" x 5/8" shank as a result of cutting the slot taller and deeper. So, anyone with a mill could convert their 250-201/202 to XL just by milling 1/8" off the top and back of the slot.It would have been a much better tool if they'd made the whole thing at least 1/8" taller and thicker.They are well made, and the price on them is the best I've found. They fit well. They are great for mounting and configuring a tool for a quick change. I highly recommend these. The only negative about them (and it's the same for all brands of these), is the rather marginal setscrews that are supplied with them. For starters, they are way longer than needed, Next, they have a weird end that the last 1/4" or so is not threaded. It doesn't matter much if you are using 1/2" tools in the holder (or 5/8" for this XL), but for 3/4", it means the setscrew is so far out only half the threads (of this probably marginal steel in the first place) are engaged, thus increasing the chances of stripping the screw or holder threads if tightened too much. I have about 20 of the 250-201/202 holders, and I've replaced the setscrews on most all of them, especially when I'm using 5/8" shank tools (or 3/4 or this one). I've never had any problem with any of them. Also, on all of them, the threaded screw that holds the height adjusting nut is usually installed rather loose. The best thing to do is remove it, clean it, then reinstall it tightly.
Customer
2025-03-30 14:44:25
I own several of these. They function fine on my BXA-style post.
laurent gaudreault
2025-03-05 20:30:18
parfait
Glen MacGregor
2025-01-24 10:35:04
Tool Holders fit the Tool Post on my King 12x36ML Lathe3/4" Tools will fit in these Tool Golders, however, the unthreaded portion of the Clamping Screws must be removed (not an issue)
Rejean demers
2025-01-06 13:48:19
pour machiniste amateur comme moi et je suis tres satisfait
Customer
2025-01-05 17:54:55
works very good so far
Customer
2025-01-01 12:08:58
Sur un tour à métal de type 12 x 36L'outil performe à merveilleMerci
Recommended Products
$84.99
$ 33 .99 $33.99