Your cart is empty.
Your cart is empty.Product Description
A50BHLW high performance low profile digital servo is a waterproof version of A50BHL. It is added an IP67 waterproof function and upgraded the potentiometer to magnetic angle sensor on the basis of A50BHL, which is very suitable for humid and drizzle environments. The innovative imported breathable composite waterproof glue is used to cover and seal the circuit board, so that the heat generated by the circuit board can be dissipated freely while water cannot enter, so as to achieve excellent waterproof effect.
What's more, this A50BHLW servo adopts exquisite CNC middle and upper aluminum case design with black and red color, with high-quality brushless motor and super silky double bearings, and the innovative imported magnetic induction potentiometer, which is resistant to water medium and has no internal contact and no wear during operation, makes the steering gear work in the left and right strokes with accurate start-stop positioning accuracy and return to centering accuracy. Ideal for 1/10 1/12 RC On Road, Touring, Drifting Car, Airplane, Boat, Robot etc.
Features
- High Performance Low Profile Digital Servo
- Magnetic Sensor Waterproof IP67
- High Precision Steel Gear
- High Quality Brushless Motor
- Reliable Dual Ball Bearing
- Programmable Digital Circuit
- Aluminium Top and Middium Part
- Ideal for 1/10, 1/12 On Road, Touring & Drifting Car, Drag Race Car, Kyosho Landjump, Airplane, Boat, Robot etc.
This A50BHLW 0.073Sec waterproof low profile rc servo is programmable by the AGF-SPV3 servo programmer(not include) to change the torque, speed, angle, inversion, etc.
Tip: USB servo programmer is not included. If need the programmer, please search the Asin: B09NR1KPM6.
Specification
- Brand: AGFRC
- Control System: PWM
- Horn Gear Spline: 25T-φ5.92mm
- Direction: CCW
- Angle Sensor: Magnet Angle Sensor
Loading Current
- 3300mA @ 4.8V
- 3600mA @ 6.0V
- 4100mA @ 7.4V
- 4200mA @ 8.4V
Package Included
- 1 x AGFRC A50BHLW 19KG Waterproof Low Profile Servo
- 1 x 25T Metal Servo Horn
- 1 x Accessory Kit
Low Profile Size
A50BHLW digital high voltage servo with a low profile dimension: 40.8*20.2*26.5mm (1.61* 0.80*1.04in), ideal for 1/10, 1/12 on road, touring & drifting car, drag race car, Kyosho Landjump, rc truck, helis, airplane, boat, robot etc.
180° Control Angle
The maximum control angle of this steering servo is 180°±10° when signal range is 500 to 2500 uSec.
IP67 Waterproof Level
AGFRC A50BHLW waterproof low profile servo, IP means Ingress Protection Rating, 6 = Dust Tight, 7= Immersion up to 1 Meter depth of 30 minutes.
Customer
2025-08-21 16:24:03
I have 2 of these servos, one I’ve had for over 2 years, the other for over a year, without a single issue to report. Paired with the usb tuner, these are hands down the best servos for drifting punching well above their price point. I run yok dp-302 gyros, which work flawlessly with these servos. Great out of the box tune, but unmatched once tuned. And the tuner, unlike other brands, actually makes sense. Hate steering wobble but want access to the full range of gain your gyro is capable of? Start with this tune:- Damping factor: 350- PWM Power: 69% 😎 * this max power setting helps really smooth out your steering input from the TX to the wheels- Sensitivity: Low- Click “write†and enjoyI run these on my R-ER and Travis 2, and the steering is butter smooth. Snobs scoff at my servos from time to time, but they’ve never owned, used em or tuned em. They’re missing out, but you don’t have to. If you made it this far, pull the trigger and thank me later.
Shannon V
2025-08-03 16:27:06
It's fast, has a nice tight action, and seems to be well-made. It's more expensive than many other brands, but alot of other servo companies actually rebrand these for a reason. I purchased this one for the steering servo on a Kyosho Fazer mk2 build and was very happy with the result. A high quality servo let's you tune-in the steering fairly easily to suit different conditions and operator enjoyment. You will not need the full speed and strength this servo offers. Should last a long time under regular use. I had already purchased a full size, high torque one for my crawler so, I'm a repeat customer.
Jim D
2025-08-01 17:05:57
Waited to review this until I had run it for quite a bit of time. Very happy with the servo, I've now turned hundreds of laps with this on the local clay track with my 4wd RC10B74 and it's been an excellent servo. It may be TOO fast for my skill level, but it's held up to some hard hits and keeps on functioning well.I used the USB programmer to set a perfect center before installing, and configure other setup parameters. Great buy.
SB3
2025-07-07 16:13:27
Used for 1/10 remote controlled cars.Swapped previous 1251's (9 kg torque) and the 19 kg torque was noticeable different.Strong full metal case, total weight is about 10 grams heavier than the 1251's.Program option download worked first time used, adds an interesting tuning option not possible with other similarly priced servos. However, not using the programming regularly, requires computer at trackside.The AGFC Store now has some replacement gears, but no replacement cases. Some of my older cars require tab removal, so it would be nice to have an option to buy a new spare case for installation in a car with a different installation pattern.So far, no failures or issues with any of the servos.
Rotary
2025-06-29 09:26:34
Did some research on the brand and they seemed good so gave it a chance. I’m still new to Rc so wanted to try companies less popular to see how well they do. THIS WORKS GREAT! Super fast response times and easy to set. Love the finish of the special edition and look forward to seeing the next special edition to pick up and save for another build!
Curly the Cat
2025-06-23 10:17:20
I’ve seen this winch go on backorder several times, just buy it and wait the couple extra weeks, it’s a top-tier hidden-gem servo winch. I have it installed on an SCX10 Pro and it slots in nice and snug even next to the chassis-mount steering servo. It’s fast enough to be a viable comp winch for timed events. Power on 8.4v is excellent, with plenty of torque to lift the entire truck and hold it there in case you wanted to reenact that one scene from The Gods Must Be Crazy.
Hank TIfa
2025-06-22 16:46:23
This servo is very low noise, actually no noise as far as gears. Works great so far I have not complaints. I have it on a RC10B74 and its more than enough. AGFRC seems to be making great products and affordable prices. Not the norm nowadays.Update: 1/2025. This thing is still rocking. So damn quite and smooth. perfect for 1/10 but I bet it would work great in a 1/8 scale car with tires smaller than 120mm in diameter give or take. Highly recommend it the usb I use for all my other AGFRC servos. I have a few now.
Hargak
2025-03-28 10:23:43
Threw this shorty into my mini maxx, that coupled with my Noble Nb4 and latency with the traxxas junk is all gone! Great lightweight fast tough option! Now to get it to 8.4v..
Ryan
2025-01-02 13:07:43
I was skeptical at first but this little guy is fast enough to race with the big brands!
RD
2025-01-01 09:22:03
I tried this servo last year because my Savox 1258's was starting to glitch out my ESC. Savox servo use a lot of current and my ESC could not supply enough amps. So I popped the A50BHL in my B6.2D, and the glitch went away immediately. I ran the whole season, 14 club races with no problems. So this season I decided to upgrade my whole fleet to the AGFRC A50BHL. I put it in my B74.1D ran it now for 3 club races, no issues yet. Also put it in my Xray X1. So far no failures in any one the cars even though I had some very very hard hits.
Daniel Customer
2024-12-17 13:22:01
It didn't work as expected.
Recommended Products
$13.99
$ 7 .99 $7.99