Your cart is empty.
Your cart is empty. Specification:
Color: gold
Material: gold
Weight: 0.5g/0.02oz
Product Size: 2 x 2 mm / 0.08 x0.08 inch in diameter
Package details:
0.5 gram gold chip solder
Note:
Due to manual measurement, the size and weight may have a certain error.
Due to the difference between different monitors, there may be a slight color difference existed.
Ray Beasterfield
2025-09-04 15:39:03
You don't get much so consider buying many boxes if you plan on making very many items. Iff your a beginner youl run out while learning the tricks of the trade.
Denise Ford
2025-08-23 17:33:49
Haven’t had a chance to use them yet
Phyllis Allen
2025-08-14 17:05:57
Tried this in a bind when I ran out waiting for more. Came quick and as described but not real gold. Some kind of plated base metal with a super high melting temp. Couldn't get any to flow no matter what I did. Never had this problem with other suppliers
Bill
2025-08-02 10:19:17
I haven’t used it yet, but looks similar to the silver ones I ordered previously which worked fine. The package contains a very small amount of chips. If your a beginner, I would order a couple, or find a different supplier. These will be used up on 1 or 2 projects depending on how well they do.
Michael,excellent quality
2025-07-22 18:20:02
Repairs on jewelry
Ray Beasterfield
2025-07-17 10:20:18
You don't get much so consider buying many boxes if you plan on making very many items. Iff your a beginner youl run out while learning the tricks of the trade.
Denise Ford
2025-07-10 12:38:31
Haven’t had a chance to use them yet
Phyllis Allen
2025-07-08 10:26:48
Tried this in a bind when I ran out waiting for more. Came quick and as described but not real gold. Some kind of plated base metal with a super high melting temp. Couldn't get any to flow no matter what I did. Never had this problem with other suppliers
Bill
2025-07-04 10:05:17
I haven’t used it yet, but looks similar to the silver ones I ordered previously which worked fine. The package contains a very small amount of chips. If your a beginner, I would order a couple, or find a different supplier. These will be used up on 1 or 2 projects depending on how well they do.
Michael,excellent quality
2025-07-02 13:16:37
Repairs on jewelry
Moon
2025-06-22 16:41:51
I tested the product on 1.65mm x 2.5mm pieces to solder together and had to nearly melt them to get any kind of flow.
Lexan Sweeney
2025-06-03 12:06:01
I was not sure whether these would melt with just a soldering tip or not so I ordered them to try. They will not melt. They need a much higher temperature.
Isobel
2025-06-02 18:26:44
Easy to use! Very pleased with the results after soldering!
Danielgold
2025-05-27 15:15:08
EXELLENTE
alan m
2025-05-05 09:47:43
I used this solder to repair a gold ring that had , , had to be cut off . I've silver soldered in the past but this was my 1st attempt at gold . I used eayflow powder flux (the same I use for silver) and the solder flowed well when the blowtorch got it up to temperature.
Cicif 59
2025-05-02 12:31:47
Cher et pour peuUniquement réservé à la brasure or mais je pense que cela est le tarif.
MOnifA u Lager
2025-05-01 12:09:56
It didn't melt under the fire.
Paul
2025-04-13 17:02:47
This small flakes of gold are useful only if you have a soldering iron that reaches above 1320 degrees Fahrenheit. My three soldering irons (two soldering stations and a gas soldering iron) could not reach the melting temperature even on full heat so these were a bit useless.
Moon
2025-03-24 10:45:31
I tested the product on 1.65mm x 2.5mm pieces to solder together and had to nearly melt them to get any kind of flow.
Lexan Sweeney
2025-03-19 11:43:00
I was not sure whether these would melt with just a soldering tip or not so I ordered them to try. They will not melt. They need a much higher temperature.
Isobel
2025-03-07 17:06:38
Easy to use! Very pleased with the results after soldering!
Danielgold
2025-02-02 16:45:01
EXELLENTE
alan m
2025-01-17 14:43:57
I used this solder to repair a gold ring that had , , had to be cut off . I've silver soldered in the past but this was my 1st attempt at gold . I used eayflow powder flux (the same I use for silver) and the solder flowed well when the blowtorch got it up to temperature.
Cicif 59
2024-12-26 10:58:46
Cher et pour peuUniquement réservé à la brasure or mais je pense que cela est le tarif.
MOnifA u Lager
2024-12-17 14:30:34
It didn't melt under the fire.
Paul
2024-12-12 11:45:10
This small flakes of gold are useful only if you have a soldering iron that reaches above 1320 degrees Fahrenheit. My three soldering irons (two soldering stations and a gas soldering iron) could not reach the melting temperature even on full heat so these were a bit useless.
Recommended Products
