Customer
2025-08-02 11:57:18
Unhappy that it couldn't be used at all.
Shoppers
2025-06-25 11:31:13
I really liked the idea of this sled. That’s where it ended. It’s loud, really loud! It will scream at you while cocking your bow. Not good for hunting. The sled itself slides to deep into the firing mechanism. Very hard to release it from the string. Do not recommend for any Bear brand x-bows.
Raúl Salvador RÃos MartÃnez
2025-06-08 13:32:25
Más o menos to del todo bien pero trabaga
Tsgt Tom
2025-05-21 15:25:38
This cocking sled is decently made, but it doesn't work on the Bear X Intense crossbow. It will attach fine, but it will not pass under the cocking mechanism. The sled allowed the draw string to catch on the anti dry fire bar, but wouldn't go any further. I had to remove the sled while the drawstring was stuck on the ADF bar(unsafe), modify the sled and reinstall it to get the draw string fully cocked to fire. I then had to forcefully remove the sled from the drawstring due the way it was designed. I don't normally like to modify parts for my crossbows, but I couldn't leave the crossbow partially drawn.
Customer
2025-05-20 14:36:43
Slide became lodged between rail and crossbow cable under the scope. It would not release. It made the bow inoperable until I cut the sled free. Normally Allen’s has decent products, but this one isn’t for Wickedridge products.
Jason
2025-04-25 17:44:47
The overall quality seems ok. The spring-loaded rail guides had a rubber coating on them, but it was inconsistent. The biggest problem i had was that i didn't pay attention to just how big it really was when i ordered it. I have string dampeners on my crossbow and this sucker can't fit inside them. Other than that, it looks like it will do what it's supposed to do.
Mstock3
2025-01-30 17:09:49
Outer rope broke during very first use
Lila Mill
2024-11-16 14:06:07
Works perfectly for the most part but difficult to remove from the bow string once cocked…