Your cart is empty.
Your cart is empty.Product Description
AMPCOM LAN &TEL Modular Tester - 8P8C /8P6C/ 6P6C/ 6P4C/ 6P2C
IF CABLE IN GOOD CONDITION:
RJ45 UTP "Main" & "Remote": 1->2->3->4->5->6->7->8 cycling ; RJ45 STP "Main" & "Remote": 1->2->3->4->5->6->7->8->G cycling;
RJ12 "Main" & "Remote": 1 ->2->3->4->5->6 cycling; RJ11 "Main" & "Remote": 2->3->4->5 cycling/ 5->4->3->2 cycling
NG Test Examples-RJ45
NG CONDITION:
CONTINUITY :
- The LEDs corresponding to the bad pin do not light on both the Master and Remote.
OPEN :
- The LEDs corresponding to the bad pin do not light on both the Master and Remote.
NG CONDITION:
SHORT:
- The LEDs to the problem pins on the Master and Remote units do not light up.
MISWIRE:
- The LEDs to the problem pins on the master and remote light up in asymmetrical order.
Product Overview
Testing capabilities are
- Verify cable continuity, open, short, or incorrectly wired on RJ45 RJ12 RJ11 Ethernet & Telephone Cable
Detachable Design
- Master and remote units are detachable for testing cables within 300 feet of each other
- Easy to detach for 9V Battery Installation
30u Gold Plated Pin Port
Interface Support:
- Ethernet 10 BASE-T
- RJ45 TIA568A/B (AT&T 258A)
- TOKEN RING
RJ45/RJ11 Interface with 30μ Gold Plated
Easy to Carry & Storage
Includes
- A Waterproof Oxford Cloth Carrying Bag
- A Metal Carrying Buckle
For easy carrying and storage during work
James
2025-09-03 16:25:31
Liked it a lot, works as described
IT Dude in Austin
2025-06-26 10:54:12
Pop a 9V battery in and test your cable!!! You can review the cable health from either end of the device making identification very easy.
Jim B.
2025-05-08 17:42:38
When I first received the tester and installed a battery, it would not work on known good cables. I was about to return it when I decided that maybe the battery was a little low, so I connected to a bench power supply and it worked. It didn't like my rechargeable NiMH 9v battery. NiMH 9 volt batteries have a charged voltage of 7.2 or 8.4 volts. I didn't test mine, but I had just charged it prior to putting it in the tester. So now I know that the battery has to be a regular alkaline battery in tip top condition for this tester. So I cancelled my return and revised my rating from 1-star DOA to 4 - it seems a good tester for a low price device, if you use a good battery.
William O.
2025-04-29 15:16:48
For the price I paid ($10) this tester is awesome. Diagnosed my problem cable in 30 seconds.Cons-The LEDs bleed through each other, and the mode switch isn't great.
dadachip
2025-03-14 11:19:03
Work's great! Wired up my home years ago and never labeled the runs so now I wanted to set up a wired mesh and this little unit allowed me to easily figure it all out.
GH
2025-03-04 17:05:03
I was able to quickly find the source of my problem and fix the connection in my distribution panel. I had tried various other ways and this is by far the most simple.
chad crouch
2025-02-17 18:05:30
Needed to trace just a couple lines. It did its job but was giving a hard time. Switch did not work well straight out of the box.
Anonymous313
2025-02-15 10:33:08
This tool is a necessity for anyone who works with data and cables, this tool is super easy to use and super reliable with very accurate test results and great connectivity, this item is a great value for money.
Jamie
2025-01-04 21:46:00
It work, but the case image is misleading. It’s not rigid nor it’s a thight fit.. the pouch is a soft and a bit larger than the tester.The tester itself work, they should just put the actual photo of the storage instead of a render
Recommended Products