Your cart is empty.
Your cart is empty.Product Description
Usage Notes:
Shake the resin well before use.
Unscrew the cap and add it to the resin tank according to requirements, and select the right settings when using.
After printing, use supporting tools for post-processing, including spatula, diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%), lactate or isopropyl alcohol cleaning liquid.
*It is not recommended to pour the cleaning waste liquid directly into the sewer. It is recommended that the residual resin be treated by light curing after outdoor evaporation or heating to evaporate the water.
Precautions:
1.Keep sealed and away from light at room temperature. Avoid heat or sunlight.
2.Recommended temperature: 18-35℃. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60℃) before use.
3.In case of settlement of resin pigment, please stirring or shaking well before use.
4.In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled.Therefore, it is suggested that:
(1)The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);
(2)The duration of sun exposure (summer) should be controlled at about 1 hour;
(3)Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;
(4)It is recommended to print in a dark room, or cover when printing.
To ensure successful and perfect printing, please check with user guide in the link for further details.
Brand Manufacturing:
- For freedom to make through 3D printing technology
- ANYCUBIC has gathered a professional 3D R&D team
- Committed to creating a high-quality desktop 3D printer
- Was rated as the "Most Popular 3D Printer Brand"
- 3D technology brings more possibilities to life
ANYCUBIC Water Washable 3D Printer Resin
No Need for Alcohol, Easy to Clean
Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use.
It supports 3 ways of washing, such as water washing with Wash & Cure machine, wash in the container, ultrasonic washing. There's always one way that suits you.
- Wavelength: 365-405nm
- Density: 1.15-1.2 g/cm³
- Viscosity: 150-250 cP or mPa·s
- Surface hardness: 80HD
- Tensile strength: 30-45 MPa
- Elongation at break: 8%-15%
- Molding shrinkage: 3.72%-4.24%
Multiple Choices, No Limitation
ANYCUBIC Water Washable Resin supports 3 ways of washing: Anycubic Wash & Cure machine, Running Water Washing and Ultrasonic Washing. There's one way that suits you.
Low Shrinkage & Fast Speed
Print with fast curing speed and low shrinkage rate provide the excellent printing experience and effects. And the molding shrinkage as low as 3.7%.
Higher Precision
Based on ANYCUBIC photosensitive resin, specific proportions of nano - scale microcrystalline ceramic powders are added to make the resin more sensitive to light and get high accuracy prints.
Low Viscosity, Fast Printing
ANYCUBIC 3D Water Wash Resin with low viscosity means it has great fluidity during the printing process and helps to improve printing speed.
High-quality Prints without Cracks
Anycubic Product Lab shows that the models printed with our resin can be stored for 3 years in natural environment without cracks after curing.(Different models and environments may cause differences in experimental results)
Long Shelf Life
ANYCUBIC upgraded water washable resin has a longer the shelf life to 1 and a half years, to help the resin to store longer and safe use. The data comes from Anycubic Product Lab.
Pablo
2025-07-06 17:19:16
This resin is the only resin I've ever used, why? because it's water washable, it's the same brand as my printer, and IPA is hard to get in Colombia, so water wash is a solid option.The resin is good, it has profiles on most of the slicers and they are pretty accurate, I haven't had issues using the recommended settings, prints come out clean, BUT it warps, so, don't leave your print hanging for a while after it's done, or you're gonna have some issues.The smell... yes, it smells, it is noticeable, I don't know if other resins smell like this one, but if this one says it smells less then, I don't wanna know about the others, Respirator is a must while working with resin printing, and once you close the lid, or clean the prints, the smell is gone so, I guess it's ok.Overall, solid option if you want a water washable resin, prints come out beautiful, I've had no issues with supports, it cleans super easy, (I like rinsing the prints with 70% ethanol and that thing removes the resin like magic).
Alex K.
2025-07-03 11:55:22
I haved used this resin for prolly the last 3 years or more. Love this stuff. Cleans well with works, cleans amazing in ISO. Smell isnt too bad but i use in a double vented hood area. Works perfect with my phrozen 4k mightys.
Ashton
2025-05-24 13:36:38
Great resin, no issue. Does take a little bit of scrubbing to get the residue off, but otherwise a wise choice
Jordan M.
2025-05-15 17:05:10
Just as strong as the normal resin. Way less smell.I printed a 10 inch by 8inch dragon from loot studio. And this made it so much faster to clean prints. Clean the vat. Clean everything with just some cool water. And them some warm water for a second quick wash.If your printing in home use this to avoid the stress and mess
Rob
2025-02-12 10:35:14
*Used with an Elegoo Mars (original)*Water washable resin is a lifesaver, since I don't have to worry about purchasing and using IPA. This resin flows well, prints great, and cleans up amazingly! The price isn't too shabby, either.Just remember to set your variable to what it says on the bottle, and you'll have no problem using this stuff right away, and getting great results.
cody
2025-01-26 15:45:35
just adding a review to up the looked at numbers i like it no issues on my end in my halot one had one failed print in the whole bottle and i think that was my end and not the goop
Argue
2025-01-20 16:48:43
Works great. High quality prints. Low odor. Will buy again
Joey Young
2025-01-05 10:54:13
Always loved this resin. It was a good price & water washable so no alcohol.Been ordering it for quite a while now.Started running low on my old bottle & ordered new ones.This new bottle is not only shorter but also skinnier. It might still hold the same amount of liquid but it definitely gives off Shrinkflation and I wouldn't put it past any corporate to shrink a bottle slightly and give us abit less.Just a heads up and posting this in case the bottle gets even smaller in the future so I can leave another review
Recommended Products