Your cart is empty.
Your cart is empty.Auto Reset ATC/ATO Circuit Breaker Fuse For Automotive Marine RV Car Truck Audio Battery Protection Automatic Reset | Low Profile
Jason
2025-07-17 10:26:58
Do your wire ampacity work. This auto reset will hold its ground until the incorrectly used circuit wire burns up. Its a great idea for auto reset, but if the incorrect (too small) wire gauge is used, you're fixing to make a serious headache to deal with. I used 8ga ground and 10ga 12v aux, but there's taps off that I used 16ga thhn. Until I change a few things I stuck with 20amp, as my reason of 10 and 8ga aux and ground was to minimize voltage drop to the electric brakes. Pay attention.
Brell Cooper
2025-06-27 17:39:37
I use these as a fuse to prevent overheating and burnout when building high powered nerf blasters. Just solder one in-line between the battery and motors/switches and you have a self resetting fuse that will protect expensive upgrade parts from burning out when the blaster jams. Soldering is required to install and the fuse is a bit bulky compared to regular fuses that are not self resetting. Works great with medium and larger builds but space may be an issue on smaller builds. An absolute necessity for full auto and 2 stage builds.
F. Falcone
2025-06-16 10:41:45
Works great, much better than the standard fuse. Quick reset.
Ron H.
2025-05-25 16:47:55
Maybe give me a second chance to get the truck off the road, still protect the wiring and not have to carry a lot of extra fuses. Only dislike is the circuit breakers are to tall to put the cover back over the fuse box.
Harold H.
2025-04-12 10:24:29
Great value
lmoreau
2025-04-05 16:29:17
Have not had chance to test this yet but it should work fine for resetting circuit power. Just note that this is about 1/2 inch taller than a normal fuse and a cover would not fit well that is only meant for a normal fuse. This is a 10 Amp Circuit Breaker Fuse ATC/ATO auto reset. If it continues to trip, check your wiring for shorts to ground and repair or risk damage to your equipment.
Rlvenn
2025-04-01 16:53:37
Only issue was I had some covered inline fuse holders but these are taller but work great
Don
2024-11-25 14:51:25
take out the blown fuse replace with this can't be any easier
Recommended Products
