Your cart is empty.
Your cart is empty. WOHHOM 80A Auto Car Stereo Audio Solar Energy Circuit Breaker Reset Fuse Inverter
No need to keep replacing fuses anymore, simply reset breaker and you are ready to go.
Description:
This Circuit Breaker offers critical protection to your system. When the system is over power or short circuit, the breaker will cut and save your equipment.
No need to replace the fuses, the system can be reset by a simple switch which also offers safe and instant system shut down.
Features:
1. For overload protection of car stereo/video system, protect electrical appliances.
2. Suitable for connecting audio power cord.
3. Used for instead of built-in fuse holder.
4. Can be installed on the panel or fire wall.
5. Great safety and cost effectiveness.
6. Made of alloy materials, good conductivity, high technology and high temperature resistance.
7. Unique Push Button Reset can also be used as a Kill Switch.
8. Easy to operate with manual reset arm.
Specifications:
Ampere range: 80A .
Ampere Optional: 20 /30 /40/50/ 60/80/100A/150A.
Voltage: 12V-24V DC.
Work Temperature: -10℃ to 50℃ (-14F to 122F).
Size: 98mm (L) x 43mm (W) x 35mm (H) .
Package Included:
1pcs x 80A Car Audio Fuse Holder.
Warmly Reminder
1. Please choose the right current circuit breaker base on your requirements.
2. Please correctly push the button to avoid damage the circuit breaker.
3. Please assure the products work on right working temperature to avoid too heat then stop work.
JOE FOWLER
2025-08-16 12:52:47
I installed this due to my trolling motor shutting off at high speeds. This not only fixed the problem, but this lasted through a storm with waves crashing over the back deck, flooding the boat and I was able to use the trolling motor as the bilge pump worked. Highly waterproof and highly recommend
Zack
2025-07-27 10:57:47
As the title says, I used this on my ebike battery build. I mostly use it simply as an on/off switch for the battery terminals, but it doesn't hurt to have the added safety of the breaker. In my situation, the BMS on the battery should trip before this breaker, so this just serves as a backup.
F. Turner
2025-07-09 13:31:03
This is waaaay better than getting an in-line fuse.You NEVER have to buy another fuse again, because it has NO fuse .Also, you can cut-off the power to you amplifier, if you need to adjust your cross-over sound settings for your mid-rage and high speakers.My sub is a 15-year old Infinity BassLink. And I am running it with a Pioneer AVH NEX-2550 head unit. My stuff is BANGIN' HARD now. This is because the 30-watt blade fuse I originally had under the hood was weak and restricting proper flow to my amp. With this breaker my 15-year old sub sounds waaaaay better. I never new it could BANG that good. And sounds cleaner too.===========INSTALLATION was a breeze.1) - UN-hook just the positive cable and put the terminal on a cloth so it does not touch any metal by accident2) - Strip about 1/2 inches of the protective sleeve off the Audio cable for both the ends that will go into the Fuse Breaker Switch3) - Jam the wire as far as it will go into both ends of the breaker4) - Screw down the wire cables with an allen-wrench.5) - Make certain to have the clear and red protective caps screwed back on for a water-tight seal6) - NEVER, EVER install this breaker close to your amplifier.You just need to install it as close as you can to the car battery. About 6-inches of cable or so.7) - For SAFETY, I made certain to have the breaker switch in the "OPEN" position BEFORE I attached it to the battery terminal.8) - Connected to the battery terminal. Turned on the car and radio.9) - Closed the breaker switch10) - Viola!All done, son !!===========ADDITIONAL NOTES :For my 200 Watt amplifier, I got a 40 AMP.IMPORTANT: Make certain to get just the right amp amount that SAFELY matches particular wattage of your amplifier.NOTE: Purchasing too high of an Amp for the breaker is like having NO protection at all.Hope all this helps.
Jon
2025-06-27 11:25:58
Works as it should and got and finish is good.
SLJ
2025-06-25 18:30:33
Seems to be as good as anything. I would buy again.
DESINC
2025-06-14 11:30:25
does what it said, easy install, may want to go a bit higher on amp just tom be sure.
Mr Bellows
2025-05-21 12:08:04
Product 30 amp fuse purchased November 2022. Same issue as another user.Used on a 2022 trailer from the 30 amp solar controller to the battery. Unit failed catastrophically, pole bent, frozen fused in open switch position and circuit disconnected.
Repro63
2025-05-17 18:50:59
I built a so called "Solar Generator" and needed some added protection. This 70A DC breaker was installed between my 1000W inverter and the bus bar (distribution block) with 4AWG cable. It was easy to install and gives me piece of mind. It also serves a second purpose. If I am not using the inverter, I turn it off and then trip the breaker to ensure that no power at all is going to the inverter.This added protection is worth the extra effort and the breaker is a terrific value for the price. It is good quality, works well and does trip when overloaded. I tested it 3 times and it just works. Reset takes about a minute when it cools down. I can easily recommend this breaker and I give it 5 stars.
Dimitri Raptis
2025-04-19 12:53:57
The design is nice and practical. Stopped working a couple of days after the return policy ended, this was too soon.
Albert
2025-04-02 10:58:30
Sturdy design, solid breaker switches and terminal block mounts. Works perfect to isolate larger draw electronics like the inverter from the cars Aux Battery.
Herman vallee
2025-03-29 12:25:58
Meilleur qu’une fuse!
Sandman
2025-03-12 15:27:53
Well made circuit breaker.Performs as it should, will buy again.
Donald McPherson
2025-01-19 15:08:12
Circuit breaker for solar batteries set up. Does the job.
Recommended Products
