Your cart is empty.
Your cart is empty.Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
BenchTest
2025-09-05 11:45:14
Ordered and installed this filter/gasket kit on a 2014 Avalon. The filter is near-identical in all facets to the OEM filter/screen. The only difference I could find was a couple of manufacturing markings. All of the structural areas appear identical. The gasket is of a rubber material where as the OEM gasket is rubber-over-metal. That's not a big deal if you know how to properly tighten a pan against a rubber seal. If you don't, seek qualified assistance as you shouldn't be inside of a transmission anyway. Kit does come with o-ring that seals between valve body and filter. This o-ring is a snug fit, as it should be.Beck Arnley has been in this business a LONG time and is an OEM supplier for many manufacturers. Buy with confidence.The only negative is that Amazon did a poor job of packaging. They shipped this kit in it's original box (slapped a label on the manufacturer's box, which isn't sealed) with no tape, no seal, nothing to prevent it from opening. By shear dumb luck, it arrived all intact.
Gary Storm
2025-08-25 10:25:21
Filter looked and felt like OEM and fit well. Other filters I was going to purchase locally did not come with an outing which doesn't make sense. Gasket was ok and easy to thread the bolt through before putting the pan on holding the bolts in place. You just have to use an inch lb torque wrench to not over tighten bolts, if not you will cause a leak with the rubber gasket. So far so good.
Bruce
2025-08-18 20:49:06
the filter fits and does what it is supposed to do.
Dave
2025-07-20 15:06:53
Gasket fit and filter fit nicely, no leaks
Scott
2025-04-23 18:41:28
Good product, nothing earth shattering... Seals fit, filter fit... Transmission still works... All in all a good product, but nothing remarkable.
Customer
2025-04-09 15:38:02
Exact replacement for OEM filter in the U660E transmission for a 2009 Toyota Avalon XLS (picture is old filter on left, new Beck Arnley on right). Gasket with this filter is rubber while the original OEM is metal, therefore the OEM torque spec for the transmission pan bolts of 66 in lbs is overkill. Through research on forums I found that people had success torquing them to only 35 in lbs with a rubber gasket. This worked great for me and felt like going higher would have potentially stripped some. No leaks noted so far. Make sure to get new crush washers for the fill and drain plugs as well (Rexka brand part number 90430-12008 for drain plug and 90430-18008 / 90430-A0003 for fill plug).
Rick
2025-03-05 21:26:15
the filter was an exact match to the original
Joanna Vinals
2025-02-25 18:43:06
Product was a affordable, and perfectly matched the factory filter and seal. Though for Lexus in essence it's for Toyota as well.
M.
2025-02-06 15:10:17
I installed this in conjunction with a transmission cooler to prep my car for towing duty. The filter looked of good quality, fits perfectly, the price is a fraction of what the dealer would charge. The only notable difference is the gasket material, the OEM was more of a metallic gasket while this one is more rubbery, as a result I would suggest to torque the bolts down 2 - 3 times to compensate for the 'squish' in the gasket. At the time of this review, it has been three month and no leaks.
kevin litwiller
2024-12-24 14:45:13
Went togeather nicely seems to be good quality .
Vitalii Syrovetnyk
2024-12-17 12:12:40
Without any problem
Frank Cowperwood
2024-12-15 10:43:19
Rubber gaskin with filter? Are you kidding me? It must say OK
MIGDAL
2024-12-06 17:41:39
Great fitment, solid build quality. My mechanic does not like the rubber gasket that Beck Arnley includes. I ended up reusing the original Toyota "crush washer" style gasket with some silicone.In summary, YMMV with the rubber gasket, either get an OEM one or reuse yours if it's good :)
Recommended Products
