Your cart is empty.
Your cart is empty.Product Description
Sunnydongze provides the best quality birch edge banding strips with customer focus,and experience wonderful DIY edging to ensure a neater and more complete appearance.
Our design is high quality & fashionable,we are doing market research which is matching most customer favorites. Birch Edge banding is a thin material used to seal the exposed sides.
Edge Banding Materials
Edge banding is a thin material used to seal the exposed and raw edges of plywood.It's a strip of wood veneer with heat sensitive adhesive on one side and the other side acts as a barrier against dirt and moisture.Edge banding is mainly done to cover plywood sides in order to match a cabinet’s finished look,but it also protects the inner plywood from possibly warping.
Easy DIY Edging Repairs
The hot-melt formula is activated by use of regular household iron,hairdryer or professional bonding machines.With no special tools or skills required,the flexiblewood veneer tape is easily applied by ironing on and then trimming away any excess if needed.
Repair All Household Edges
The real wood edging is designed to finish or repair edges on a variety of household panels,such as cabinets,shelves,kitchen units,kitchen surfaces, internal doors,tables,picture frames,drawers,pianos,wooden toys,or anywhere that needs a perfect edge.The product is particularly useful on wood,plywood, particleboard,hardboard,or even metal.
Birch Edge banding is a thin material used to seal the sides.
Laminate
Cabinet
Door
Desk
Customer
2025-09-03 11:10:54
I received my order of Birch wood edge veneer today. The veneer was very simple to apply using a clothing iron set on "cotton" mode and no steam and bonds very strong to plywood edging. It was then easy to trim the excess off with a utility knife, then lightly sand. The birch color blends right in with regular sanded plywood too. An excellent product for the price!
prfct
2025-09-02 15:56:30
I used as floor in dollhouse. Easy to iron down, stays in place.
Linda Buffington
2025-08-09 18:18:29
The media could not be loaded.
Richard Carver
2025-08-03 18:00:33
It's OK, however the glue is thin and doesn't bond at the corners real well. Not as good as I have used in the past. After varnished might be fine. I am using an oil finish so this will not work.
Wild 0ne
2025-07-26 17:24:53
Good adhesion and easy to stain
The Crank
2025-06-29 14:19:05
Used the product to help hide a router mistake I made while building a cabinet door. Worked well to cover up the problem. It matched the birch lumber and was almost invisible after putting polyurethane on the door.
Keith H Datum
2025-06-27 18:27:12
This product is absolute garbage, the overall cut is uneven, it is finger jointed approximately every 36 inches. Probably great if you don't care what your project looks like but I care how my work looks will never buy again.
Customer
2025-06-14 10:31:54
I can't use this veneer. There are SO many seams (shown in photo), and the veneer is very thin so the seams pop up immediately. The adhesive is very poor. When applying it with the same heat and time that I use with other brands, it's not fully adhered. And it's so thin that if I sand it at all, it's going to be gone. I will return this and choose another brand.
Alan for Alberta
2025-05-12 17:57:52
Great quality. easy to install.
cameron jess
2025-01-20 13:58:48
Used this to replicate a 70 year old table usinf maple veneer plywood. Turned out great
Nicholas
2025-01-19 18:32:56
This product is definitely a bad purchased in my opinion. I don't know if this is standard for edgebanding or not but every 2-3' you have a ugly finger joint that you need to cut out as waste. If you need a single piece to be that long, find another product.
Recommended Products