Your cart is empty.
Your cart is empty.Product Description
Bull Ring’s are the premium tie-down anchor points for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bull Ring's retractable anchor points easily install into the stake pockets on top of your bed rails. Simply pop the stainless steel ring up when you want to use it to secure a load, then hit it down flush when you don’t. Each is made from stainless steel for a 1,000 lb. capacity. Bull Ring’s stainless steel tie down anchors are essential truck accessories for optimal truck bed storage.
Installation:
- Remove screws
- Insert base into stake pocket
- Place bottom of stainless steel backing plate into hole
- Insert screws and pull outward on ring while turning screws
- Just before snug, center the anchor in hole
- Once the screws are tight, give the screws one last 1/4 turn
- Do not over tighten - avoid power tools and ensure screws are only hand right
Fitment
Our 4025 model sits in line with the rail caps for a flush, clean look which makes them compatible with Tonneau covers. Installation is quick and easy and requires nothing more than a Phillips head screwdriver. The typical install time is under a minute.
To get the most out of your tie-down anchors, they can be installed in the 6 stake pockets locations of your Ford truck with 1, 2, or 3 pairs available to fit those slots.
Models Available:
- 4025 – Fits in the Front, Middle, or Rear Stake Pockets
- 4035 (Offset) – Certain trucks have stake pockets in the front/middle that are ‘offset’ from the plastic rail cap. If you have this on your truck, purchase this 4035 for the front or middle stake pockets (near the window).
Never worry about losing precious cargo
Each anchor is built to last and is rated for 1,000lbs. Constructed with a stainless steel ring, a 1" block of glass filled nylon and secured with a stainless steel backing plate.
The stainless steel ring easily glides up to secure your load and stores flush when not in use for smooth and easy use.
This anchor stores flush, making it compatible with Tonneau covers.
InquisitiveEngineer
September 6, 2025
These are a little expensive, but I'm beyond impressed. Exact fit for my new 2019 F150!!! (no cutting, no drilling, looks like it was installed by Ford) Extremely well designed, and as an engineer the little details stand out. Very well made. Stainless hardware with brass thread to prevent binding. The tie-down hook locks into place when you pull up on it making it easier to install straps, etc.. but then a small push down and it releases. (No fancy mechanism to break over time, just a simple pin under neath that clicks into a smaller indention.) The molded plastic is high quality, and they even took the time to add the exact same texture to the top as Ford has on their plastic bed rails along the top. (literally looks like the union UAW guys installed it at the Dearborn Truck Plant) Texas designed, fabricated overseas, but well done. Even has a small fish design under bull ring which speaks to this companies integrity. I would highly recommend and would buy again in a heartbeat!!!
Charles Herman Gardner
August 24, 2025
These two downs are great and easy to install. They fit my 2024 F250 perfectly and I ordered another set for my brothers F150 because they appeared to fit it too.
Customer
August 13, 2025
These are great! I bought four for the bed corners on my 2024 F-350, and will order another two for the middle pockets as well. I found installation easiest when removing both bolts first - one video here shows leaving a bolt in, but you don't need to do that.
Chuck D.
August 11, 2025
I bought the four pack. They are packed right and are heavy duty and built to a high standard. The back two fit perfect but the front two did not fit without overlapping. I was going to use them anyway since I needed them for vacation in a week. I called the phone number printed on the package and was quickly answered by someone who knew my language and the product. shock. This guy didnt ask a million questions or tell me tough luck but offered to send me two offset rings. When I asked about sending back the ones that did not fit he said not necessary. Whats? Keep em or give em away. wow. Not only that but they arrived so quick I could use them for prep and the vacation. Best customer service I've ever had. Product is great too, they all fit and look like (better than) factory. They held a kayak down easily and securely in 80mph (I mean 65mph officer) traffic. Should have bought them a long time ago.
K. D. Grady
August 8, 2025
My truck sets up high and to reach over to tie anything down to the factory anchors which are more toward the bottom of the bed is very difficult. Found these anchors after doing a little research and decided to give them a try. I am very pleased with the purchase and the functioning of these anchors. I haul lumber and other items that extend past the tailgate and run a bungee cord from one anchor to the other side bed and it works fine. These anchors then snap down and are flush with the top of the bed. They are easy to install. The ones offered by the manufacturer were $20 higher and made by the company that makes these.
Ruusta
July 30, 2025
I got 4 of these, one for each "corner" of the bed for my 2015 F150. Three of them fit perfectly flush and neat. One was a little off, but OK. I was worried about unscrewing them all the way before install but i figured out it was OK. The mounting/bracket screws are 4 star quality, recommend using hand screw driver as opposed to battery power driver to avoid trashing the threads on top of the screw
Leslie
June 12, 2025
Fits my truck perfectly, although it did take me a few tries and watching the video to figure out how to install it. The second one took about 30 seconds to install after I learned how to do it.Exactly as described and so handy. Seems very sturdy.
Jeff
June 10, 2025
Wonderful purchase! I was tired of popping out the plastic covers to access the tie down points on my truck bed. Installation took 2-3 minutes for both of them combined. They work, fit, and look perfect! I wish I would’ve bought these sooner. Highly recommend!!
Bob G
June 5, 2025
Product fits great, holds down cargo with ratchet straps with ease.Fits my 2024 Ford F150
Edgar Vidal
June 1, 2025
Buena calidad, parece producto original de FORD
Victor Diamond
May 25, 2025
Took all of 30 seconds to install per side. Works with a solid tonneau cover. Have used to secure furniture. Pulls out easily and shifts back into the recess, giving a sleek appearance.
Stephen Mac
May 20, 2025
Great product. Fit my 2018 F-150 perfectly.
Wade Fontaine
May 19, 2025
I mistakenly ordered four regular Bull Rings and was surprised to find that the ones closest to the cab did not fit correctly due to the strange offset (which only occurs on some trucks). Luckily I was able to exchange one of the sets for these which fit perfectly. They literally install within minutes and are extremely functional. They pull up and stay in place and snap back down. No more trying to hook straps in the holes!
InquisitiveEngineer
February 14, 2025
These are a little expensive, but I'm beyond impressed. Exact fit for my new 2019 F150!!! (no cutting, no drilling, looks like it was installed by Ford) Extremely well designed, and as an engineer the little details stand out. Very well made. Stainless hardware with brass thread to prevent binding. The tie-down hook locks into place when you pull up on it making it easier to install straps, etc.. but then a small push down and it releases. (No fancy mechanism to break over time, just a simple pin under neath that clicks into a smaller indention.) The molded plastic is high quality, and they even took the time to add the exact same texture to the top as Ford has on their plastic bed rails along the top. (literally looks like the union UAW guys installed it at the Dearborn Truck Plant) Texas designed, fabricated overseas, but well done. Even has a small fish design under bull ring which speaks to this companies integrity. I would highly recommend and would buy again in a heartbeat!!!
Charles Herman Gardner
February 11, 2025
These two downs are great and easy to install. They fit my 2024 F250 perfectly and I ordered another set for my brothers F150 because they appeared to fit it too.
Customer
February 9, 2025
These are great! I bought four for the bed corners on my 2024 F-350, and will order another two for the middle pockets as well. I found installation easiest when removing both bolts first - one video here shows leaving a bolt in, but you don't need to do that.
Chuck D.
January 12, 2025
I bought the four pack. They are packed right and are heavy duty and built to a high standard. The back two fit perfect but the front two did not fit without overlapping. I was going to use them anyway since I needed them for vacation in a week. I called the phone number printed on the package and was quickly answered by someone who knew my language and the product. shock. This guy didnt ask a million questions or tell me tough luck but offered to send me two offset rings. When I asked about sending back the ones that did not fit he said not necessary. Whats? Keep em or give em away. wow. Not only that but they arrived so quick I could use them for prep and the vacation. Best customer service I've ever had. Product is great too, they all fit and look like (better than) factory. They held a kayak down easily and securely in 80mph (I mean 65mph officer) traffic. Should have bought them a long time ago.
K. D. Grady
January 7, 2025
My truck sets up high and to reach over to tie anything down to the factory anchors which are more toward the bottom of the bed is very difficult. Found these anchors after doing a little research and decided to give them a try. I am very pleased with the purchase and the functioning of these anchors. I haul lumber and other items that extend past the tailgate and run a bungee cord from one anchor to the other side bed and it works fine. These anchors then snap down and are flush with the top of the bed. They are easy to install. The ones offered by the manufacturer were $20 higher and made by the company that makes these.
Ruusta
December 30, 2024
I got 4 of these, one for each "corner" of the bed for my 2015 F150. Three of them fit perfectly flush and neat. One was a little off, but OK. I was worried about unscrewing them all the way before install but i figured out it was OK. The mounting/bracket screws are 4 star quality, recommend using hand screw driver as opposed to battery power driver to avoid trashing the threads on top of the screw
Leslie
December 19, 2024
Fits my truck perfectly, although it did take me a few tries and watching the video to figure out how to install it. The second one took about 30 seconds to install after I learned how to do it.Exactly as described and so handy. Seems very sturdy.
Jeff
December 18, 2024
Wonderful purchase! I was tired of popping out the plastic covers to access the tie down points on my truck bed. Installation took 2-3 minutes for both of them combined. They work, fit, and look perfect! I wish I would’ve bought these sooner. Highly recommend!!
Bob G
December 10, 2024
Product fits great, holds down cargo with ratchet straps with ease.Fits my 2024 Ford F150
Edgar Vidal
December 4, 2024
Buena calidad, parece producto original de FORD
Victor Diamond
November 24, 2024
Took all of 30 seconds to install per side. Works with a solid tonneau cover. Have used to secure furniture. Pulls out easily and shifts back into the recess, giving a sleek appearance.
Stephen Mac
November 17, 2024
Great product. Fit my 2018 F-150 perfectly.
Wade Fontaine
November 12, 2024
I mistakenly ordered four regular Bull Rings and was surprised to find that the ones closest to the cab did not fit correctly due to the strange offset (which only occurs on some trucks). Luckily I was able to exchange one of the sets for these which fit perfectly. They literally install within minutes and are extremely functional. They pull up and stay in place and snap back down. No more trying to hook straps in the holes!
Recommended Products