Shopping Cart

Your cart is empty.

Your cart is empty.

Carbon Fiber Bridge 2.0 with an unique acoustic structure & finished trimming for 4/4 violin

4.7 (9) Write Review
Free shipping on orders over $29.99

$22.99

$ 11 .99 $11.99

In Stock


Product Description

Carbon fiber Bridge
Carcon Fiber 2.0
carbon fiber 2.0
carbon fiber 2.0

Sun3160
2025-08-13 11:59:35
I purchased this bridge to replace a bad bridge on a cheap violin purchased at a garage sale. I was very surprised at how well this worked, and how easy it was to install.My biggest concern was that I am not used to shaping wood bridges. Bridge blanks come larger than needed. The base has to be sanded to match the violin contour. They must be sanded to the correct height for string clearance over the fretboard and the upper curve is usually customized to the player's preference. Then they have to be slotted for proper string location, and also strategically thinned to optimize sound quality.Sandpaper is cheap, but I do not have the appropriate files to cut the string notches. Also, most inexpensive violins use a tiny piece of tubing over the high E string to prevent the string from cutting into the finished bridge, and I do not have any of this tubing.Only one side (the heel side) of this bridge shows the carbon fiber weave. The other side (facing the scroll) is a matte black surface, likely from the manufacturer sanding it to the correct thickness.This bridge comes already shaped to a good thickness and upper contour for playing, and pre-slotted for the strings. Sanding the base to fit the violin contour and for preferred string height is possible, but in my case was not at all necessary as both feet rested firmly on the wood when inserted under the loosened strings.Installing this was really quite simple, and required no sanding or filing at all. Because carbon fiber is so strong, I had no concerns at all about installing the high E string without tubing to protect the bridge.The sound while using this bridge is clearer than the old wood bridge, and I found a noticeable improvement in sustain, especially for the lower strings. The overall volume of sound has increased.I bought a garage sale violin to experiment with, and I'm so pleased with the result that I will be buying this bridge for my primary violin as well, as well as seeking out other carbon fiber bridges for my other stringed instruments.
natalia
2025-08-09 11:54:53
Really proud of this purchase, I had to replace my wooden bridge because a guitar was dropped on it and it snapped my wooden bridge in half 😐Either way, it had been around 6 years since I had gotten the wooden bridge installed, and when they installed it, they left it leaning forward and slightly warped. At least it lasted until it didn't lol.So I went on the search for a new bridge. I had recently purchased a carbon fiber bow and I really love it. So when I found the option for a carbon fiber bridge, I knew I had to purchase. I'm so glad I did!! I was also able to install it all on my own, after watching a very informational video on YouTube. SEARCH "how to position a violin bridge" and you will find a video by a channel named "Ask Olaf the Violinmaker" he is absolutely amazing at demonstrating and teaching you how to position a bridge correctly, so that there is no leaning or warping. (You'll see that he works with 2 strings then adds the other 2, in my case, all 4 strings had already been installed, so I loosed them up enough to give me space to work between the strings and the violin top plate. Watch the video and adjust per your case scebario)After installing the carbon fiber bridge and i finsihed tuning, I noticed the sound quality is WAY better than it was with the wooden bridge. CRISP, CLEAR, SMOOTH and definitely louder sound👌 (don't ask how something is crisp and smooth at the same time, just let me express myself lol)I hope this helps someone out! I definitely recommend this product, and I also recommend you watch the video if you are gonna do it yourself. If you dont feel confident installing it yourself, thats ok, take it to a violin tech for help.
Jonathan C.
2025-07-31 12:33:22
Looks dope and sounds good just not as loud. It gets rid of the squeaky sound a violin sometimes has on the higher strings and gives it a more fuller sound. 8/10 (It frailed one of my strings on installation aswell as the top plate of my violin but its wtv)
Roland M. Millington
2025-07-21 17:30:08
I have a recently tried out the STRADPET Carbon Fiber Bridge 2.0 on my inexpensive violin, and I have to say, I'm pretty impressed! The bridge is designed to enhance the sound of cheaper violins, which often have mass-produced, thick bridges that don't allow for the fullest sound possible. The STRADPET bridge, on the other hand, is incredibly thin and lightweight yet still sturdy enough to support the strings.One of the things I appreciated most about this bridge is that it doesn't choke off any frequencies. The tone of my violin was noticeably fuller and more even with the STRADPET bridge in place. Plus, it looks pretty cool, which is always a bonus.Of course, fitting a new bridge to a violin can be a bit tricky. If you're not experienced with this kind of thing, you'll want to take it to a luthier to have it done properly. Even if you are experienced, you may need to glue in some maple spacers to get the fit just right. But once you've got it properly fitted, the difference in sound is worth the effort.At $20, this is a pretty affordable upgrade for anyone looking to get a little more out of their cheap violin. I'd recommend it to anyone who knows what they're doing or is willing to learn. Overall, I think this is a great product for anyone looking to improve the sound of their violin without breaking the bank.
Kunde
2025-06-07 10:26:55
Nach zwei Wochen Wartezeit, war das gute Stück dann nun endlich da. Der Steg ist gut verarbeitet. Die Füße musste ich für meine Geige anpassen. Leider dämpft der Steg den Klang der Geige sehr. Ich habe es sofort wieder demontiert. Die Brillanz geht verloren. Deshalb behalte ich es nun nur als schönes Decko accessoire.
マエストロかとかん
2025-05-15 16:32:02
音が締まる感じがします。
青坊主
2025-04-02 13:46:14
カーボン製なので，駒の足下を削って調節できないし，弦の高さも調節できない．なので，自分の持っているバイオリンの表板の湾曲率にあっていないと使えない．と，普通なら思うでしょう．でも，工夫次第でちゃんと使えます．駒の足下がバイオリンの表板の湾曲率に合っていないなら，薄い目のシリコンシートを適当な大きさに切って挟むと良いです．弦の高さを調節したいなら，弦にシリコンチューブを巻けば良いです．木製の駒に比べて音が云々と言うのは，ほとんどの場合，駒とバイオリンの接触率の問題でしょう．ちゃんと接触している限りなら，普通以上に鳴ります．
たぐん
2025-03-25 13:19:43
よくわからない。普通
カスタマー
2025-02-16 13:10:43
駒の足が加工できないのでほとんどのバイオリンには装着できないでしょう。ちなみに音はスッカスカになりました。