Your cart is empty.
Your cart is empty.For home cooks who want an innovative, fast cooking thermometer, the CDN Waterproof Thin Tip Thermometer (DTTW572) provides accurate temperature readings with a fast 4-second response. Designed for professional chefs, the DTTW572 is NSF Certified, with a 3.5-inch stainless-steel stem. The 1.5 mm thin tip allows for easy insertion into thin cuts of delicate fish or meats as well as general purpose cooking. For home cooks who want an innovative, fast cooking thermometer, the CDN Waterproof Thin Tip Thermometer (DTTW572) provides accurate temperature readings with a fast 4-second response. Designed for professional chefs, the DTTW572 is NSF Certified, with a 3.5-inch stainless-steel stem. The 1.5 mm thin tip allows for easy insertion into thin cuts of delicate fish or meats as well as general purpose cooking. This durable thermometer can withstand water immersion. The Waterproof Thin Tip Thermometer is rated at IPX7, which means it is protected against water immersion for 30 minutes at 3 feet. This is more than enough protection against dropping the thermometer into a full sink or even a pot of soup.
Paul S. Remington
2025-08-31 17:26:11
This makes for a very nice brewer's thermometer. It's water resistant, so no worries if it gets wet or accidently falls into your wort. The build quality is quite nice. I love the length of the thermometer. Makes for very easy readings deep within the liquid. I liked it so much, I purchased a second one for a brewing buddy of mine. Recommended for all brewers!
R.PRO.
2025-07-18 18:38:08
Spot on right out of the box. I use it when deep frying and works perfect. Its waterproof so the build quality is better. Been using it since 2019 and still on same batteries, and still works great. I would certainly buy again.
Stephanie
2025-07-17 17:07:50
It's not an instant temp reading, but it is pretty fast. For the money it can hardly be beat. I've had several other digital thermometers at a similar price and this is the best I have used so far. It seems reasonably water resistant. The extra length is welcome for my application as well. Factory calibration was close, but I corrected it by a degree or so in the ice water slurry test. The correction feature is very welcome.
BWW
2025-06-30 16:00:39
Bought this for work. Temps quickly and easily from the tip of the probe. Outperforms and outlasted all of the other thermometers that the Boss has purchased through commercial sites. Thought somebody broke it one day when I came to work and it wouldn't turn on. Changed the battery and worked fine. Re-calibration capability and NSF certification were necessary to use on the job. I hate to say it, this thing is always abused by my co-workers and I always threaten to take it back home as I paid for it out of my own pocket, but I'm the one who dropped this thing in the hot fryer two weeks ago and thought It was done for. Wiped it clean with a rag, turned it on and re-calibrated it. Was shocked and supremely grateful to find it still worked! Every other thermometer gets dropped and breaks open or the steam from the fryer kills the display. This was worth the money.
MatrixSnareUC
2025-06-15 14:52:21
Using this thermometer as a home brewer, I needed something waterproof (not resistant) and accurate. One of my two favorite features about this product is the long probe. I'm able to take temperature readings in many different spots in my 10 and 15 gallon brew kettles without the fear of dropping it and ruining my purchase. My second favorite thing about this thermometer is the accuracy! I tried giving this guy the ice bath test out of the box and it was calibrated perfectly. After my first brew day with it (and a second ice bath test), I'm feel as though I'm getting quick and accurate readings. This is an invaluable tool for any home brewer who's main concern (among many others) is reaching very specific temperatures.
MaverickMA
2025-06-10 12:44:09
I needed a long thermometer primarily for homebrewing and also to have a little more wiggle room when grilling.Being that I already own the smaller version (DTQ450X), I figured this was a safe bet. I am not disappointed with the purchase.I keep this connected to the brew pot the whole time, three batches later it works great! On occasion it'll get a little too steamed up and turn off. (letit cool off for a min and it'll turn back on) For how long it is exposed to the heat and steam it does very well.The accuracy seems even closer than its little cousin, but it does have a calibration button just in case.I'd recommend!
Kindle Customer
2025-05-13 16:25:08
This thing was very accurate right out of the box. I didn't need to calibrate, it read 32 in ice water.This thermometer matched the temperature my controller was set for in the recirculation system that I use. I then compared it against the water temperature reading in my kettle, and it was spot on. I was looking at expensive laboratory grade thermometers, but I'm glad I bought this. I have a CDN in the kitchen that has stood the test of time, so I'm thinking this will last as well. Anyway, excellent thermometer.
Customer
2025-03-28 14:55:08
I purchased this product mostly because of the reviews. I am disappointed with the fact that after i calibrated it correctly i am still getting faulty readings. I was brewing beer this past weekend and had a huge boil going on and the thermometer would not read over 209 degrees. Am i missing something here?
Philippe Scott
2025-03-17 11:40:30
Love this thermometer. I purchased it mainly to observe the temp of water I use for pasteurization of my home made cider. The clip makes it very easy to keep the thermometer visible without having to hold it so I can focus on the bottles in the pot. Works great and as far as I can tell is giving me accurate readings.
ALFREDO
2025-03-08 18:59:11
EL TERMÓMETRO NO FUNCIONO DICE QUE LE FALTA BATERÃA Y YA LE CAMBIE 3 NUEVAS Y MARCA Lo.
Customer
2025-02-28 10:41:41
I’m using this as a candy thermometer and I’d say it’s pretty quick. It also seems to be accurate. Overall, happy with my purchase
Brian
2025-02-15 15:07:20
Good product
Bryce Johnston
2025-02-13 18:47:38
The only reason I didn’t give 5 stars is because it’s not very practical for commercial use as it doesn’t have a temp alarm function for candy/fudge/caramel making. In a candy or confection kitchen, rarely will someone stand right beside a 25lb batch of candy to wait for it to get to temp. Their other candy thermometer does this, and is cheaper (although not waterproof).Contrary to one other review, the thermometer is very accurate...they said theirs read the temp of boiling water at 96°-97°C...which will be accurate depending on where they live...water doesn’t always boil at 100°C (in fact, in VERY few cities does it boil at 100° as most cities are above sea-level).
Recommended Products
