Your cart is empty.
Your cart is empty.Product Description
BINSTAK 1/4-Inch Shank Durable Carbide Tipped CNC Spoilboard Surfacing Router Bit Wood Routing Bits (3 Flute) for Craftsman
- Exquisite woodworking cutter, precise, smooth, no burr edges planer router bit. 3 wings make a fast and clean cut on your project material, great for projects of any level of complexity.
- Great for hand-making and other woodworking job - Our plaining router bits are the preferred choice of professionals and hobbyists alike, with these bits, one could make floor, cabinet door etc. Good for home and improvement.
Great Applications
- Creates a base surface that is perpendicular to the router motor
- Get an accurate cut once you add your planed project material
- Can use to flatten live edge boards too large to go through planer
Package includes:
- 1 * CNC Spoilboard Surfacing Router Bit
- 1 * 1/4" to 1/2" Router Collet (Gift)
- 1 * Plastic Box
1/4 Shank Spoilboard Surfacing Router Bit
Specification:
- Material: Durable Carbide, Carbon Steel
- Shank: 1/4"
- Cut Diameter: 1"
- Cut Length: 1/4"
- Max RPM: 18000
Safety instructions:
- The item is only for industrial cutting/engraving.
- When not in use, please put in the plastic box.
- Use range suitable for woods, particle board, MDF, plywood compact panel, acrylic; Avoid cutting ferrous metal and non wood materials, iron, etc.
- Please wear good protective measures.
- Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
MaWilli
2025-08-30 13:26:58
Sharp and the shaft was straight. I mounted this in a palm router and it is chewing an end grain cutting board nice and flat! So far has cut through Zebra wood, Purpleheart, Padauk and Okoume with no problems.
Brian Beahan
2025-06-28 09:23:14
I was able to plane three sides of an eight foot by ~7" wide railroad tie with this bit, my router and a router sled/jig I made. Honestly, I thought I was going to wear this bit out because it's a really hard piece of oak. This was my first time to plane anything and this bit and setup worked perfectly. Can't believe it. Also - couldn't find a surfacing router bit at my home depot, so I am glad I was able to find this at Amazon. I would buy this again if I needed it. Mine still works fine, so I will use it in the future should the need arise.
Alex Marrast
2025-06-15 13:47:42
The bit is a good one for the price but there are 2 main issues. I have been using it on a CNC router and first major thing is that I dear not plunge it into the surface. Due to the smooth moddle section it can only plunge 1mm to 2mm for the most ( am sure its less than 2). But I still enjoy using it within the limits. On to the second issue I am observing that the blade will dullen fast. Hasn't as yet but I see it coming. I hope I can give it a little touch up after the fact but yes thats my observations. Still like my little bit within the limits, I may even be using it for the wrong reason, to plain small surfaces) but it is working.
Sam lambert
2025-06-14 10:22:46
Great quality . Works perfectly. Very smooth
Customer
2025-06-11 12:31:44
I was a bit worried that this wouldn't work very well because it was less expensive than other bits. It did a beautiful job on my Sain 4030 leaving no tramming lines and a sanded like finish. Maybe it will not last for 50 uses but I don't tram the spoilboard that often and it is a lot more cost effective to order another one if this one fails. If it fails by doing a poor job it is easy enough to get another one and go from there.
Shiro
2025-06-08 15:50:12
Helps flatten my spoilboard or helps flatten any material before getting carved. You want your material to be completely flat and parallel to your Z-axis. I'll probably upgrade to a wider bit, but this one did the job and the results were great! I definitely recommend.
Walter Telfer
2025-06-01 11:01:15
Awesome piece of equipment.
Veida parks
2025-04-30 10:04:33
Product shipped quick, got the job done. However it quickly dulled and started burning my mdf spoilboard. 25"ipm at 0.02" depth of cut in mdf resulted in the bit smoking out. I'm new to cnc so it may have been user error, but I'm a long time carpenter and thought what I was doing was reasonable for the machine I was using.
Claude
2025-04-22 15:38:30
Created a flattening table and used this bit. Worked with ease on a huge maple slab with epoxy poured in certain areas. Did the job with ease and still working it without issue.
Customer
2025-03-24 11:30:47
ok
Value for money
2025-03-02 12:49:02
I am a hobbyist woodworker operating from garage. I do not have a jointer and planer since these are expensive tools. I saw a you tube video on making a simple jig and with the use of a router and this surfacing bit, I was able to plane the surface for my projects.So far so good and happy to recommend this bit to others.
Flavio rosales lopez
2025-02-28 18:17:59
El tamaño ,es adecuado...
R. Thompson
2025-02-20 11:07:01
But if it is for a large project, consider a larger size.
Recommended Products